搜索资源列表
Kalmanfilter.rar
- 仿真方法：1．在Matlab命令窗口中输入：TargetTracke(0,0)；进行跟踪实验仿真； 2．为了体现本文的重点，即模型切换的重要性，在Matlab命令窗口中输入：argetTracke(0,1)；可以观看如果不采用模型切换的仿真结果；3．在Matlab命令窗口中输入：Mentecarlo；进蒙特卡洛仿真； ,kalman filter simulate
CR_Handoff
- 认知无线电切换算法，基于排队论，考虑主用户是否随机接入两种情况。-Cognitive radio handover algorithm based on queuing theory, to consider whether the user random access to two main situations.
TotalOne
- 不同蜂窝系统，不同移动台速率的情况下 信道保持时间，驻留时间，切换概率仿真计算-The simulation for multi size cell and multi speed MS s Channel hold time and stay time and the probability of handover
SMC
- 1.基于比例切换函数的滑模变控制算法实现 2.倒立摆滑模控制-1. Based on the ratio of sliding mode control of switching function algorithm 2. Sliding mode control for inverted pendulum
Decision
- 节点在给定的蜂窝环境中移动，判断是否发生切换。采用的是Fhmip-Node in a given cellular environment, move, to determine whether there has been switched. Uses a Fhmip
times_dynamically
- 此程序为发表过的一篇IEEE PIMRC 的paper的程序代码。是关于异构无线网络环境下的垂直切换接口激活时间的几个方案的仿真性能比较。-This RAR package contains a set of program code which was used in a published paper on in IEEE PIMRC. It is about the interface activition time in heterogeneous wireless networks.
com
- 这个程序是四通道的串口通信代码，点击通信开始时，自动从指定串口接收并显示数据，可实现串口的切换-This procedure is four-channel serial communication code, click on the beginning of communication, automatic from the specified serial port receive and display data, enabling the switch serial
yuanlaideqiehuan
- 自己做的matlab的实现FUZZY和PID控制互相切换的仿真-Matlab own realization of the FUZZY and PID control to switch the simulation with each other!!
1
- 利用反控制法构造了1 个新的混沌系统,分析新系统的平衡点及在平衡点的特征值,分形维数,L yapunov 指数 等性质,设计1 个由2 个混沌系统组成的可切换的实际电路并进行实验,通过1 个开关选择器,电路可以实现2 个子系统 的功能,观察到2 个子系统在各个相平面的混沌吸引子。-Use of anti-control method to construct a new chaotic system to analyze the new system equilibrium point
heterogeneous_vertical_handoff
- 异构网垂直切换的仿真，内含有matlab代码，以及jakes模型，大尺度衰落-Simulation of heterogeneous network vertical handoff, containing matlab code, and the jakes model, large scale fading
algorithm-platform
- 提出一种可以在IEEE 802.11网络环境下使用的，基于IPv4的过后切换注册算法。在这种算法中，三层使用二层提供的切换触发消息以减少时延，这是一种跨层切换机制。-IEEE 802.11 is proposed can be used under the network environment, IPv4-based registration algorithm after the switch. In this algorithm, using the second floor offers
SlideTrans
- 原理就是通过不断设置滑动对象的left(水平切换)和top(垂直切换)来实现图片切换的动态效果。 可选属性： Vertical: true,//是否垂直方向（方向不能改） Auto: true,//是否自动 Change: 0,//改变量 Duration: 50,//滑动持续时间 Time: 10,//滑动延时-Principle is to continue to set the slide object by left (horizontal handoff)
DetectiveContour
- 视频场景切换及轮廓检测（VS2008+opencv）,采用VC编写，注意源代码里的视频名称是“sunyanzi.avi”,改成自己的视频名称即可-scene change detection and detective contours,write with vc,remember change the name of video in the code into yours
00000
- 搭建切换系统的模块，很有用的哦,在此基础上很容易搭建时滞系统的仿真模块哦，还可以提出宝贵的意见修改哦-it is very useful for you to simulation a switched system
Second-order-switched-linear-system-
- 二阶线性切换系统稳定切换律的设计与仿真的源程序 -Second-order switched linear system is stable and the design and simulation of switching law
MY1
- 简单介绍一下：单相双模式逆变器、双模式控制、包含并网及独立，加上切换的仿真。滤波器上欠优化。-Brief introduction: dual-mode single-phase inverter, dual-mode control, including grid and independent, with switching simulation. Owed on the optimization of filters.
shiliangchang
- 可以将grid数据存储为netcdf格式，并满足CF协议，结果可用Panoply软件可视化！ 使用方法： 1）切换matlab目录到当前目录 2）载入数据data.mat到matlab 3）matlab中键入 >>save_netcdf(zonal_wind_speed, meridional_wind_speed, outnc.nc ) 4）将outnc.nc用Panoply打开 5) 使用Variable列表中的径向和纬向系数，即可画出矢量效果图了
handoff-code-matlab
- 无线异构网络垂直切换算法的仿真matlab-handoff code of matlab
二阶线性切换系统稳定切换律的设计与仿真研究
- 通过研究二阶切换律，得到一种设计切换律的更普遍的方法。给出了切换律使切换系统渐近稳定的条件，最终通过实际的例子和Matlab的仿真呈现研究结果。(By studying the two order switching law, a more general method for designing switching laws is obtained. The switching laws are proposed to make the switched systems asymptotica
95302929vertical_handoff
- 异构网络切换，根据移动终端在LTE和WIMAX内的接收信号强度，实现垂直切换(According to the received signal strength of the mobile terminal, the handover between the LTE and WiMAX)