搜索资源列表
I2C串行总线元器件标准驱动程序的编写
- I2C串行总线元器件标准驱动程序的编写，可自己定义串行时钟线和串行数据线所在口-I2C serial bus driver standard components of the preparation, may own definition serial clock line and serial data line I
pro
- 单片机控制远程温度测量存储显示系统，包含单总线接口芯片（DS18b20）、I2C总线（2线\EEPROM芯片24LC02）、SPI总线（3线或4线\实时时钟S35190A)标准C语言接口代码，以及图形液晶和串口代码，是单片机系统开发的实用程序集合，具有很高的参考价值-Controlled storage Display System remote temperature measurement, including a single bus interface chip (DS18b20), I
PIC32-i2c
- PIC32单片机IIC串行通信的标准函数程序。编写PIC32程序很好的参考资料。-PIC32 microcontroller serial communication standard IIC function program. PIC32 program write a good reference.
i2c
- 标准I2c读写时序，verilog Hdl-Standard I2c read and write timing, verilog Hdl
I2C
- 这里面都是I2c的标准的例程，基本上修改一小，就可以移植过去了-There are the standard I2C routines, basically a small modification, it can be transferred over
7290a
- 本模拟I2C软件包包含了I2C操作的底层子程序，使用前要定义 好SCL和SDA。在标准8051模式(12 Clock)下,对主频要求是不高于12MHz(即1个 机器周期1us) 若Fosc>12MHz则要增加相应的NOP指令数。(总线时序符合I2C标 准模式,100Kbit/S)。-The simulation package includes I2C operation of the bottom of I2C subroutines, use the former t
i2c
- 标准 C语言 I2C程序，经过严格测试-Standard C language I2C procedures, to undergo a rigorous test
Makefile
- A standard Makefile for I2C Driver module generation
PCF8563TIIC
- 1. I2C总线驱动程序(用两个普通IO模拟I2C总线) 2.包括100Khz(T=10us)的标准模式(慢速模式)选择， 3. 和400Khz(T=2.5us)的快速模式选择， -1. I2C bus driver (with two common I2C bus IO simulation) 2. Including 100Khz (T = 10us) standard mode (slow mode) choice, 3. And 400Khz (T = 2.5us) the
iic
- 一个verilog源代码，可用ISE等实现，功能为I2C接口标准建模。-A verilog source code, can be used, such as the realization of ISE, the functional model for the I2C interface standard.
I2C_c51_all
- I2C串行总线标准驱动程序，c51，软件模拟i2c时序-i2c standard driver
I2C_init
- 在通迅程序中,基本上所有的人最开始接触的通迅协议就是I2C或者串口,但是一个合格的电子软件工程师,必须熟悉I2C的标准流程和标准程序包,而不是仅仅是移值.看了这套源码,你可以学习周立功公司的I2C程序标准.-In the communication process, essentially all of the people in contact with most of the communication protocol is I2C or serial port, but a qualif
smartcard_read
- 智能卡读写程序源码可以读取符合iso7816规范的智能卡程序 这个程序仅供学习研究，请勿用于非法用途-Smart Card Reader program source code can be read in line with iso7816 standard smart card program only for study and research in this program, please do not used for illegal purposes
iic
- I2C接口标准建模源码,I2C interface standard modeling source-I2C interface standard modeling source
I2C
- 使用VHDL写的标准 IIC代码 标准的接口文件，具有三态功能-The use of a standard IIC write VHDL code for a standard interface file, with tri-state function
i2c
- I2C通讯协议驱动程序 包括标准模式，和快速模式，用KEIL C51可以直接调用-I2C communication protocol driver including standard mode, and the fast mode, with KEIL C51 can be directly invoked
I2C
- ARM芯片（LPC22XX）的I2C使用实例。 通过该实例可以了解I2C的通讯细节和使用规范。 该实例包含中已经将I2C的相应设置。-ARM chips (LPC22XX) I2C-use cases. Through the examples to understand the details and the use of I2C communication standard. The examples included in the appropriate settings have
I2C
- 语言：verilog 功能：用Verilog HDL编写的I2C主机串行通信的程序。两条总线线路：一条串行数据线 SDA， 一条串行时钟线 SCL；串行的 8 位双向数据传输位速率在标准模式下可达 100kbit/s，快速模式下可达 400kbit/s ，高速模式下可达 3.4Mbit/s；在数据传输过程中，当时钟线为高电平时，数据线必须保持稳定。如果时钟线为高电平时数据线电平发生变化，会被认为是控制信号。 仿真工具：modelsim 综合工具：quartus -Language:
I2C
- iic总线挂接在amba的apb总线上，标准接口，verilog代码的实现-iic bus attached to the amba' s apb bus, standard interfaces, verilog code implementation
I2C
- 基于STM32的标准软件模拟I2C接口程序，只要修改引脚定义及延时接口程序即可使用，改程序已在工业产品上大量应用，十分的稳定可靠并且代码编写规范。(The standard software based on STM32 simulates the I2C interface program. It can be used only by modifying the pin definition and delay interface program. The modified program