搜索资源列表
GSM_Sms
- S3C2410 上面的关于SMS 完整工程源代码，包括LCD、Flash、DMA、mmu、Power、Timer等驱动，以及SMS声音文件
dm9000-tftp
- arm裸板驱动开发dm9000操作的相关代码，由clock.c gpio.c lcd.c mmu.c icmp.c ip.c等组成-dm9000 arm bare board-driven development operations related to the code, by the clock.c gpio.c lcd.c mmu.c icmp.c ip.c etc.
hardware
- 《嵌入式Linux应用开发完全手册》一书中无操作系统下对GPIO、NAND Flash、LCD、I2C、Uart、MMU等调试程序-" Embedded Linux application development entirely manual," one book, no operating system on the GPIO, NAND Flash, LCD, I2C, Uart, MMU, etc. debugger
ALL_Code
- 基于s3c2410硬件的 U-boot代码，包括中断，LCD，及MMU等-Based on S3C2410 hardware U-boot code, including interruption, LCD, and the MMU, etc.
iar442
- lcd mmu led 的相关测试-lcd mmu led the relevant test
User_manual_2410x
- This manual describes SAMSUNG s S3C2410X 16/32-bit RISC microprocessor. This product is designed to provide hand-held devices and general applications with cost-effective, low-power, and high-performance microcontroller solution in small die size
lcd_mmu_nand
- lcd ,mmu, nand test,this is a good code
uCOS-II
- 用以三星arm芯片的ucos操作系统，包括了内存管理，flash定时器和库函数等-ucos for GT2440,including flash mmu lcd and timer
lcd_mmu
- arm裸板驱动开发LCD和MMU操作的相关代码，由clock.c gpio.c lcd.c mmu.c等组成-LCD arm bare board-driven development and operation of the relevant code MMU by clock.c gpio.c lcd.c mmu.c etc.
adc
- arm裸板驱动开发adc操作的相关代码，由clock.c gpio.c lcd.c mmu.c uart.c等组成-adc arm bare board-driven development operations related to the code, by the clock.c gpio.c lcd.c mmu.c uart.c etc.
smdk2413_application_note_rev10
- SMDK2413 (Samsung MCU Development Kit) for S3C2413X is a platform that is suitable for code development of SAMSUNG s S3C2413X 16/32-bit RISC microcontroller (ARM926EJ-S) for hand-held devices and general applications. The S3C2413X consists of 16-/32-
luojichengxu
- S3C2440 几例裸机实验程序 包括ADC MMU PWM LCD -S3C2440 Bare metal process
RGB-color-theory
- 在三星2440平台上各个部分的运行程序，包含ADC,LCD,MMU,键盘，蜂鸣器，nandflash，网口的各种驱动程序-Samsung 2440 platform on various parts of the run the program, including ADC, various LCD, MMU, keyboard, buzzer, nandflash the network port driver program
hardware
- 2440相关开发板的所有裸机程序,包括MMU NAND LED LCD 串口-2440 development board all bare metal procedures, including the MMU NAND LED LCD serial
EELiod
- 嵌入式课上基本的实验实验一 系统引导实验 实验二 8段码实验 实验三 键盘实验 实验四 IRQ中断处理 实验五 定时器 实验六 串口传输 实验七 实时时钟 实验八 LCD控制器 实验九 触摸屏 实验十 MMU 实验十一 Can Bus 实验十二 步进电机 -Embedded class basic Experimental test of a system boot Experiment two 8-se
key_rtc_clock
- 硬件环境：ARM9-mini2440开发板 软件环境：Keil-MDK软件和J-Link ARM V4.36g软件项目描述： 1、基于ARM9-mini2440 三星s3c2440控制，通过 LCD液晶显示时钟界面、图形文字等； 2、引用RTC实时时钟，MMU,按键外部中断，字符、图像经过取模软件取模和PS软件处理 3、实现的功能：可通过按键产生外部中断进行时间的同步可调。 -The hardware environment: ARM9-mini2440 develop
um_s3c2412_rev106
- This manual describes SAMSUNG s S3C2412-This manual describes SAMSUNG s S3C2412X 16/32-bit RISC microprocessor. This product is designed to provide hand-held devices and general applications with cost-effective, low-power, and high-performance mic
iceboot
- 基于TQ2440的建议Uboot实现,包括： 核心初始化 内存初始化 mmu初始化 按键初始化 nandflash初始化 DMA初始化 LCD初始化 电阻式触摸屏驱动 网卡初始化 移植tftp客户端 移植bootm命令 对上述内容的测试程序 代码风格良好，注释详细，可用于2440平台的学习，有兴趣的可以向本人要学习所做的笔记。QQ:49042765-Based on Uboot s proposed TQ24
2440-driver
- s3c2440的原厂驱动程序,非常全面包括Dma,flash,IIC,iis,IrDA,lcd,mmu,Nand,RTC,pll,Spi,Uart,timer,ac97等-s3c2440 drivers, include, Dma,flash,IIC,iis,IrDA,lcd,mmu,Nand,RTC,pll,Spi,Uart,timer,ac97等