搜索资源列表
s3c44b0iic
- S3C44B0 I2C的uCLINUX的驱动程序（铁电存储器FM24系列，若针对AT24系列只需在写操作中增加延时即可），本驱动士原创且经过测试。-S3C44B0 I2C uCLINUX of the Driver (ferroelectric memory YPCC series against AT24 Series if only in write operation can be increased latency), the original drive with which the
移植uClinux到思创44B0
- 嵌入式系统软件开发指南，uClinux到思创S3C44B0黄金开发板的移植。-Embedded System Software Development Guide, uClinux to think Chong S3C44B0 gold development board transplant.
API_functions
- 本程序在S3C44B0 uClinux的嵌入式GUI-the procedures in S3C44B0 uClinux embedded GUI
ARM_ov511[1].tar
- 用于ARM S3C44B0/S3C4510嵌入式系统的ov511驱动程序，在自己的uclinux系统下，完全没有问题！可用于驱动采用ov511芯片的摄像头,如网眼V2000等，其中USB芯片采用SL811hc。-S3C44B0/S3C4510 for ARM Embedded System ov511 driver, Basis in their system, no problem! Drivers can be used for the ov511 chip camera, such as
qguclinux_rom
- uclinux 的详尽的移植内核文件，基于 s3c44b0开发板-Basis of Uclinux detailed transplantation core document-based development board s3c44b0
SW44B0TEST00
- uclinux的已经编译好的测试文件,ARM扳型号为s3c44b0-compiled test documents, models ARM tied to s3c44b0
blob040928.tar
- uclinux启动代码for s3c44b0-Basis boot code for s3c44b0
romfs0930.tar
- uclinux文件系统for s3c44b0-Basis file system for s3c44b0
driver_for_TL16C750_under_uClinux_+_44b0
- 此程序为串口芯片tl16c750在uClinux + s3c44b0环境下的驱动程序.tl16c750R FIFO设置为64BYTES, 除此之外,此程序还能缓存20条已经收到的串口数据.即存储数据量为20*64=1280BYTES的串口数据,而不用担心未及时读串口时发生数据的丢失现象.此外,附此驱动的测试程序,以及编译后的映像文件.-procedure for the serial port chip tl16c750 uClinux s3c44b0 environment of floodi
MiniGUI-STR
- MiniGUI-STR 1.6.2在uCLinux+S3C44B0上的移植
uClinux-bios
- 三星S3C44B0的UCLINUX—bios代码，由公司亲自提供，现在拿出来供大家下载，谢谢分享
uclinux
- uclinux源码，已经再s3c44b0上移植成功！--Source code of uclinux. It was migrated to s3c44b0.
arm-uclinux-lcd
- 这是基于ARM s3c44b0核的lcd控制器的显示程序.包括字符显示和图象显示的程序.-This is based on the ARM s3c44b0 nuclear LCD controller display program. Characters include display and image process.
302554
- S3C44B0工程开发板资料包,支持uCOS-II和uClinux-S3C44B0 project kit development board in support of uCOS-II and uClinux
s3c44b0_serial
- 44b0+uclinux s3c44b0串口驱动程序-44b0+uclinux s3c44b0 serial dirver code
uClinux-bios
- ARM处理器S3C44B0的启动引导程序.-ARM processor startup S3C44B0 boot.
LCD-controller-application
- 学习S3C44B0的LCD控制器特性，熟悉LCD控制器与LCD驱动器的连接接口，了解uClinux下framebuffer显示驱动的使用-Learning S3C44B0 the LCD controller features, are familiar with LCD controller and LCD driver interface, the connection to understand the framebuffer display driver under uClinux us
s3c44b0
- 在三星44b0上移植uclinux并开发串口通信程序-Samsung 44b0 uclinux porting and development of serial communication program
S3c44B0-uClinux
- S3C44B0在UCLINUX上的移植步骤，描述比较详细，适合初学者使用-S3C44B0 UCLINUX the transplant in the steps described in more detail, suitable for beginners
linux_transplantation
- 《S3C44B0开发板移植内核2.6 uclinux记录》以及一篇论文《基于Linux的USB 2.0 OTG IP核主机驱动的研究与实现》。-" S3C44B0 development board transplantation kernel 2.6 uclinux record" and a paper " Linux-based USB 2.0 OTG IP core host-driven research and implementation."