搜索资源列表
sjf
- 一个通用的JTAG烧写程序,本人对其进行了性能的扩充,使其可以支持更多的处理器类型,如S3C2410,AT9200等.使其更具通用性.-A general JTAG burning program, I extend its performance to support more CPU types, such as S3C2410, AT9200, etc. This enhances its generality.
Blink-compileshuoming
- 一种基于nesC的无线传感器网络应用程序,并提供了编译说明书,此文件就是编译后生成的二进制文件，将此文件用avr-studio通过JTAG烧写到节点中。-nesC-based wireless sensor network applications, and to provide a compiler brochures, this file is the compiled binary files generated. this document is avr-studio through t
usb_cpld_code
- usb_cpld_code.zip usbjtag - Variations on the implementation of a USB JTAG adapter.-usb_cpld_code.zip usbjtag-o Variations n the implementation of a USB JTAG adapter.
epm7032ae
- (1) This pin may function as either a JTAG port or a user I/O pin. If the device is configured to use the JTAG ports for in-system programming, this pin is not available as a user I/O pin. (2) The user I/O pin count includes dedicated input pins
DSPQuestion
- 做DSP最应该懂得157个问题（回答） 四.5V/3.3V如何混接？ TI DSP的发展同集成电路的发展一样，新的DSP都是3.3V的，但目前还有许多外围电路是5V的，因此在DSP系统中，经常有5V和3.3V的DSP混接问题。在这些系统中，应注意： 1)DSP输出给5V的电路（如D/A），无需加任何缓冲电路，可以直接连接。 2)DSP输入5V的信号（如A/D），由于输入信号的电压>4V，超过了DSP的电源电压，DSP的外部信号没有保护电路，需要加缓冲，如74LVC245等，将5V信
jtag-0.5.1
- JTAG Tools is a software package which enables working with JTAG-aware (IEEE 1149.1) hardware devices (parts) and boards through JTAG adapter.
porttalk
- porttalk是一种并口驱动程序源代码，很多简易JTAG调试器使用它。-porttalk is a parallel port driver source code, many simple JTAG Debugger to use it.
good fet
- The GoodFET is an open-source JTAG adapter, loosely based upon the TI MSP430 FET UIF and EZ430U boards, as described in their documentation. See Improving the MSP430 FET on Travis Goodspeed's blog for further information. In addition to JTAG, the
JTAG
- 使用VC++开发的一个通过JTAG接口和ARM芯片交互数据的程序，包括一些简单的JTAG协议。-Use VC++ Developed through a JTAG interface and ARM chip interactive data procedures, including some simple JTAG protocol.
SJF2440
- 从PC机并口通过JTAG烧写S3C2440的程序源码。这是一个Vistual Studio C++工程。-Machine from the PC parallel port JTAG programmer through the process S3C2440 source. This is a Vistual Studio C++ Works.
sjf2410forwigglerJTAGcode
- sjf2410不支持wiggler下载，主要是并口所用的数据线定义不同，主要修改JTAG.H头文件里的定义。若并口地址也不是常用的则也需要修改相应文件。 Visual C++环境编译 修改部分如下所示 #define TCK_H 0x04// 0x01 #define TDI_H 0x08// 0x02 #define TMS_H 0x02// 0x04-sjf2410 does not support download wiggler is mainly used for
libjtag-0.0.4.tar
- arm jtag仿真器设计库文件,设计arm 仿真器非常有参考价值。-a arm jtag library，it is very useful for designing a arm jtag
maxii_sch
- 采用EPM570作为核心，外接FIFO，RAM。可进行数据采集，采用60M时钟的ADC ADS830E。ADC前端电路需要改为差分输入方式以减小电路噪声。该电路经过实际检验可以使用，需要将JTAG电阻改为220以下或者短接。-EPM570 used as a core, external FIFO, RAM. Can be a data collection, using 60M clock ADC ADS830E. ADC front-end circuit differential inpu
brjtag18c_src
- 通过连接并口的JTAG线或wiggler线，刷写支持JTAG的目标设备的FLASH。免拆芯片维修升级。主要针对BCM多种CPU和个别其他CPU。多种常见FLASH支持。-By connecting parallel port JTAG cable or wiggler line of brushes to write to support JTAG target device FLASH. The maintenance-free split-chip upgrade. Targeted at
JTAG_arm926ejs_get_idcode
- A program on PC to access TAP controller of ARM via parallel port to JTAG cable.
gpioExample2
- gpio 控制实例程序 用Jtagio 作为标准的gpio时序-gpio control sample program Use the JTAG IOs as standard GPIOs and gives a configuration sequence.
18-JTAG_remap
- 这个例子描述如何使用JTAG口线作为标准的GPIO。-This example describes how to use the GPIO JTAG mouth line as a standard.
Pioneer bct jata
- Is a program parallel por jtag manual spanish
text1
- Descr iption: One can also the game engine! Looking for a long time do not look at the anti-~ File list:
ScienceDirect_articles_16Aug2017_12-58-16.192
- Nor again is there anyone who loves or pursues or desires to obtain pain of itself, because it is pain, but because occasionally circumstances occur in which toil and pain can procure him some great pleasure. To take a trivial example, which of us ev