搜索资源列表
rsencode
- 通过编程计算ＲＳ编码前后通信系统的误码率可以很清楚的看到系统的编码增益．-programmed to calculate RS coding communication systems around the BER can clearly see the coding gain.
04041115_2_bpsk
- bpsk分布，awgn,瑞丽衰落信道，调制解调加滤波，计算误码率-BPSK distribution, awgn, Ruili fading channel, modulation and demodulation increase filtering, bit error rate calculation
QPSKberPerformance
- 代码为QPSK半分析方法计算误码率，下载后直接运行就行了-code for QPSK semi-analytic method BER, downloaded directly running on the line
buhuo
- 扩频通信中的捕获问题，用GOLD码进行扩频， PN码相位捕获，利用捕获的相位，接收机产生偏移的GOLD码，进行解扩和误码率计算-Spread Spectrum Communication capture issue, GOLD spread spectrum code, PN phase acquisition. The capture phase, the receiver have offset the GOLD code for despreading and bit error rate
BER_simulation_with_matlab
- 误码率仿真讲义，在matlab环境中如何进行接收数据的误码率计算
M-PSK
- 4psk&8psk的matlab实现，采用蒙特卡罗仿真法，计算误码率误比特率，绘制相应曲线-the realization of 4psk&8psk by Matlab tool,it use Monte Carlo way to calculate the BER and draw the graph.
跳频（计算误码率）
- 对占空比为0.1的跳频的部分频带干扰的误码率计算（基于matlab）
BERSNR.rar
- BPSK中计算误码率BER与信噪比SNR的关系的,BPSK bit error rate BER is calculated with the relationship between signal to noise ratio SNR
hardofdm
- ofdm加窗前后的对比频谱图，以及循环前后缀重叠与不重叠两种情况的对比，最后给出了误码率的计算。-ofdm added after the contrast spectrum window, and the cycle before the suffix overlap and contrast the two cases do not overlap Finally, the bit error rate calculation.
teowaymodulates
- 用ＱＰＳＫ调制，实现系统的误码率计算，包含两种实现方法。-Using QPSK modulation, the system bit error rate, including two types of implementation.
channel_simulation
- 代码包含的主要内容是AWGN信道上BPSK,QPSK,16QAM的调制解调，以及误码率计算过程，其中还有OFDM调制在信道上传输的仿真内容-Code contains the main contents of AWGN channel BPSK, QPSK, 16QAM modulation and demodulation, and bit error rate calculation process, in which there are OFDM modulation in the cha
04
- 计算两个无线通信芯片之间进行通信时的误码率，使用的是CC1100射频芯片，程序以调试通过-Calculated between the two wireless communication chips to communicate the BER, using the CC1100 RF chip, the program in order to debug through the
QPSK_ordinary
- 仿真QPSK在高斯信道下的性能，实现QPSK的误码检测并且计算其误码率-Simulation of QPSK in the performance of the Gaussian channel to achieve the bit error detection and QPSK bit error rate calculated
OFDM_simulation
- 包含各个模块：信源，信道，同步，信道估计，信道编码，误码率计算等，希望可以帮助大家更好的理解OFDM系统。- It contains various modules: source, channel, synchronization, channel estimation, channel coding, error rate, etc. I hope to help you better to understand the OFDM system.
8psk
- （1） 分析QPSK调制、解调原理，并画出其系统框图； （2） 产生等概率且相互独立的二进制序列，作为待传输的信号，并画出其波形； （3） 进行8PSK调制，分别画出I、Q两支路信号经过乘法器后的波形以及8PSK调制波形； （4） 产生均值为0，方差为1的加性高斯随机噪声，画出其时域波形及频谱； （5） 将加性高斯随机噪声作为传输信道的干扰，画出接收端信号的时域图； （6） 进行8PSK解调，输出解码序列，画出解调后信号波形； （7） 计算系统信噪比、传输误码率。-(1)
bpsk
- 一个关于BPSK误码率仿真的程序，其中包括信号产生，加入高斯白噪声，和误码率计算！-A BPSK BER simulation program, including signal is generated by adding Gaussian white noise, and bit error rate calculation!
tongxin
- 利用MATLAB对通信系统进行了仿真，该仿真包括了实现汉明编码，FDMA调制以及信号通过高斯白噪声信道传输的通信系统以及相关误码率的计算等。-Communication systems using MATLAB simulation, simulation, including the implementation of the Hamming code, FDMA modulation and signal through the Gaussian white noise channel co
qpsk
- 加性高斯白噪声环境下QPSK调制解调系统的性能分析，包括box-buller产生AWGN以及QPSK调制与解调，误码率计算-Performance additive white Gaussian noise environment QPSK modulation and demodulation system analysis, including box-buller produce AWGN and QPSK modulation and demodulation, bit error ra
diff_code
- Pi/4-DQPSK差分编码以及非相干解调和误码率计算。Box-muller产生AWGN和高斯信道。-Pi/4-DQPSK differential coding and non-coherent demodulation and error rate. Box-muller produce AWGN and Gaussian channel.
BPSK
- 无线激光通信系统在对数正态分布下的平均误码率的计算-the average BER of Wireless optical communication system is studied by log-normal distribution using Gauss methad