搜索资源列表
GSMAT
- 利用GSM模块，at命令来发送短消息，通过串口-The use of GSM module, at command to send SMS messages through the serial port
GPSTest
- 模拟发送GPS数据到指定的一个串口，目的用于单元测试中可以不使用物理的GPS模块，使单元测试能提前进行-Simulated GPS data is sent to a specified serial port designed for unit tests, you can not use a physical GPS module, so that unit tests can be carried out in advance
ex_9
- 实现串口通信，通过RS232可以从PC机向UART模块发送数据，然后读出-Serial communication via RS232 from the PC to the UART module to send data, and then read out
send
- 串口发送程序，能够通过参数设置波特率，可直接生成模块，在顶层例化。-Serial transmission program, able to set the baud rate parameter can be directly generating module instantiated at the top level.
ET662-U-GPS-Test
- VC++ 6.0 仿真台湾环天ET662 的GPS模块的串口软件，亲们可以修改发送数据的内容及格式，随时应用到其他GPS模块的调试。该程序我只是使用在嵌入式平台GPS接收数据时调试时，只需要串口支持即可。-VC++ 6.0 Simulation Taiwan ring-day ET662 GPS module serial software, parents can modify the content and format to send data to debug the applicati
pratice_uart
- uart串口程序，包含接收模块，发送模块，顶层模块和测试模块，自己写的，请参考-uart serial procedures, including receiver module, transmit module, the top-level module and test module, write your own, see
test_uart
- verilog 编写的串口发送和接收模块，能够设定停止位和校验位，并且包含了modelsim仿真文件。-verilog prepared by the serial port to send and receive module, capable of setting the stop bit and the parity bit, and includes modelsim simulation files.
tccxt
- 1.实现邮件检测功能： （1）注册账号，注意正确添写POP3服务器，用户名，密码。 2.实现发送短信功能： （1）在注册账号时要添写正确的手机号码，并选中发送到手机的复选框。 （2）跟据自己购买的GSM模块说明书设置串口参数，一般是“19200，n,8,1”。 （3）添写当地短信中心号码，前面的86可加可不加，如果没有写，系统在按“确定”后会自动加上。 （4）注意：如果短信中含有中文字符，则一定要设成Pdu模式，否则短信可能发送失败。-1. The realizat
kl_j_9_17
- AVR MEGA1280 串口驱动ip模块接收发送音频数据，并通过模拟开关控制声音通道驱动音频设备-AVR MEGA1280 serial port driver IP module send audio data receiving, driven by analog switch control sound channel audio equipment
5_bluetooth_uart
- 基于FPGA，硬件平台：basys3，软件平台：vivado。描述语言：verilog。封装自己的蓝牙串口IP。蓝牙串口数据传输需要三个模块，分别是波特率生成模块，接收模块和发送模块。-Based on the FPGA hardware platform, software platform: basys3, vivado. Descr iption: verilog. Package your own Bluetooth serial port IP. Bluetooth serial da
湿敏传感器模块（3线制）
- 温湿度传感器三线制 实现串口接受和发送数据，实时查看温湿度(Temperature and humidity sensors, three wire system to achieve the serial port to accept and send data, real-time temperature and humidity)
uart
- 该源码包是uart串口协议的verilog语言模型，主要包括了3个部分：波特率产生模块，uart接收模块，uart发送模块。(The source package is UART serial protocol Verilog language model, including 3 main parts: baud rate generation module, UART receiver module, UART transmission module.)
LEDL151-uart1-3
- 串口1接模块数据，用串口3发送到PC机，用调试助手显示。(Serial port 1 module data, with serial 3 sent to the PC machine, with debugging assistant display.)
语音报警
- 语音播报设备故障，通过串口发送语音数据给科大讯飞语音模块，形成故障语音播报功能，语音数据存储在SQLserver数据库中(Voice broadcast equipment fault, through the serial port to send data to the voice iFLYTEK voice module, fault speech function, voice data stored in the SQLserver database)
Chuankou
- 实现8位串口的接收和发送模块，将串口接收和发送模块分成了几个小模块进行设计。方便之后的bug的修改。(Receiving and sending module of 8 bit serial port)
GSM开发板第三版资料0629
- 可通过单片机串口发送短信到手机，包括51系列和avr系列的单片机，资料全面 包括源码(SMS can be sent to mobile phone by serial port)
sdram_uart
- sdram控制器的设计，包括 ：初始化、刷新模块、读写模块、命令解析模型的编写，通多串口发送接收数据验证设计的正确性(The design of SDRAM controller includes initialization, refresh module, read and write module, command parsing model, and the correctness of data verification design by sending and receiving
8位蓝牙单片机例程
- 本例程51单片机与蓝牙模块连接,可通过蓝牙模块接收和发送字符串,从而控制测试灯的亮灭。其中使用51单片机的串行口2的工作方式1(This routine is connected to the Bluetooth module by 51 single chip microcomputer. It can receive and send the string through the Bluetooth module, so as to control the test lamp's extin
Tx
- 利用verilog实现串口发送，每次按键一次发送一次数据，按键模块进行了消抖处理(Using Verilog to realize serial port sending. Each button sends one data at a time, and the key module performs buffeting processing.)
DFPlayer Mini 控制命令-串口调试
- 使用串口通讯，发送DFPlayer MINI 模块控制命令（命令文档）(DFPlayer MINI command)