搜索资源列表
sscyd.rar
- 二阶数字谐振器的频率特性和滤波器的幅频特性和相位特性和预畸变在双线性变换中的作用,Second-order digital resonator frequency filter characteristics and amplitude-frequency characteristics and phase characteristics and pre-distortion in the bilinear transform the role of
DSP
- 先采集一单声道音频信号（.wav）并用WAVREAD文件采样读取，并对其进行频谱分析。分别用窗函数法和双线性变换法设计低通、高通、带通三种FIR滤波器和IIR滤波器。用M文件使信号通过滤波器并对输出信号进行时域和频域分析。-First acquisition of a mono audio signal (. Wav) files with sampling WAVREAD read, and their spectral analysis. Window function, respectiv
FIRshiyan
- 利用双线性变换设计IIR滤波器（只介绍巴特沃斯数字低通滤波器的设计），首先要设计出满足指标要求的模拟滤波器的传递函数 ，然后由 通过双线性变换可得所要设计的IIR滤波器的系统函数 。-IIR filter design using bilinear transform (only introduced the Butterworth digital low-pass filter design), first designed to meet the index requirements of
vcprogram1
- 双线性变换 很好的程序 关于VC编程的一段程序-Bilinear transform a good program on the section of VC programming procedures
lvboqi
- 巴特沃斯滤波器设计，双线性变换法，代码不是很长-Butterworth filter design, bilinear transformation method, the code is not very long ... ...
iir
- 实现有限冲激响应滤波器的设计，按照给定指标采用模拟低通滤波器（巴特沃思低通或者切比雪夫低通）去逼近理想模拟低通滤波器 ，然后通过双线性变换法对模拟滤波器进行数字化，得到数字滤波器 。-To achieve the design of finite impulse response filter, according to a given target analog low-pass filter (Butterworth low-pass or a Chebyshev low-pass) to
IIRditonh
- 本实验首先按照给定技术指标采用模拟低通滤波器（巴特沃思低通滤波器）去逼近理想模拟低通滤波器，然后通过双线性变换法对模拟滤波器进行数字化，得到数字滤波器。-In this study, first of all technical specifications in accordance with a given analog low-pass filter (Butterworth low-pass filter) to approximate the ideal analog low-pass
IIRwushihui
- 本实验首先按照给定指标采用模拟低通滤波器（巴特沃思低通或者切比雪夫低通）去逼近理想模拟低通滤波器 ，然后通过双线性变换法对模拟滤波器进行数字化，得到数字滤波器 。-In this study, the first indicator in accordance with a given analog low-pass filter (Butterworth low-pass or a Chebyshev low-pass) to approximate the ideal analog low-
IIRcui
- 另一种方法：首先按照给定指标采用模拟低通滤波器（巴特沃思低通或者切比雪夫低通）去逼近理想模拟低通滤波器 ，然后通过双线性变换法对模拟滤波器进行数字化，得到数字滤波器 。-Another way: First, according to a given target analog low-pass filter (Butterworth low-pass or a Chebyshev low-pass) to approximate the ideal analog low-pass filter
MATLAB
- 基于 MATLAB 的语音信号分析与处理的课程设计.录制一段自己的语音信号，并对录制的信号进行采样；画出采样后语音信号的时域波形和频谱图；给定滤波器的性能指标，采用窗函数法或双线性变换设计滤波器，并画出滤波器的频率响应；然后用自己设计的滤波器对采集的语音信号进行滤波，画出滤波后信号的时域波形和频谱，并对滤波前后的信号进行对比，分析信号的变化；回放语音信号-MATLAB-based voice signal analysis and processing of the curriculum. Re
IIRlow1
- 用双线性变换法设计IIR滤波器滤除噪声，用户可根据自己需求改变参数以满足自己所需性能。-Bilinear transform design IIR filter to filter out the noise, the user can change the parameters according to their own needs to meet the required performance.
Program_9_2_py
- 基于切比雪夫1型滤波器以及双线性变换法的IIR滤波器设计。-IIR filter design based on the Chebyshev type 1 filter, and bilinear transformation method of IIR filter design.
DSP
- 基于双线性变换法IIR数字切比雪夫带阻滤波器设计-Chebyshev bilinear transform-based IIR digital band-stop filter design
DSP-IIR-shuzilvboqideshixian
- 数字信号处理实验三_——用双线性变换法设计IIR数字滤波器-Digital signal processing experiments _- IIR digital filter design by bilinear transformation
IIR-digital-filter
- 双线性变换法和脉冲不变法实现数字低通滤波器的设计-Bilinear transformation method and the same pulse of digital low-pass filter design
bandpass-filter
- 基于双线性变换 切比雪夫 带通滤波器 带阻滤波器-Based on the bilinear transformation chebyshev bandpass filter
shuangxianxin
- 用双线性变换方法实现低通滤波器设计，验证了该方法的有效性.-Bilinear transformation method is used to implement the filter design.Verify the effectiveness of the proposed method.
IIR-digital-filter-in-MATLAB
- 采用脉冲响应不变法和双线性变换法设计IIR数字滤波器。 -Using impulse response method and bilinear transform IIR digital filter design.
impinvar_bilinear
- chebyshev1模拟原型滤波器，利用脉冲响应不变法和双线性变换法设计数字滤波器-Chebyshev1 simulation prototype filter, using the impulse response method and bilinear transformation method to design digital filter
ex4_13
- 用matlab实现双线性变换切比雪夫I型低通滤波器设计-Bilinear transformation chebyshev type I low-pass filter design