搜索资源列表
fault.zip
- 基于PSCAD的双馈风力发电机的低电压穿越模型,PSCAD based on the doubly-fed wind turbine through the low-voltage model
Dynamicmodelsimulationofdoubly-fedwindturbines
- 为满足在电网发生故障时风电机组需保持与电网连接并向系统不间断供电的要求,提出 了双馈风力发电机的动态模型、变流器模型、变流器保护及电网模型,以研究双馈风力发电机的暂 态特性.以1·5MW SUT-1500双馈风力发电机为原型,由一个无穷大电源等效电网模型,变流器模 型采用定子磁链的定向电流矢量控制方法,利用PSCAD软件对双馈电机的暂态特性进行仿真.仿 真结果表明,矢量控制能够实现双馈电机的有功、无功解耦,并可改善系统的低压穿越能力. -To meet the power f
dd
- 介绍了无刷双馈异步风力发电机的结构及其发电调速原理。从无刷双馈电机的基 本方程出发，通过坐标变换，建立了无刷双馈电机在转子旋转坐标系下的d-q 模型，并进行了Matlab 建模和仿真。-Introduced a brushless doubly-fed induction wind turbine structure and the principle of generating speed. BDFM from the basic equations, coordinate transfo
windmppt
- 风机 直驱永磁同步风力发电机 最大功率跟踪 自己搭的永磁发电机模型-wind mppt
050308_fixed
- 风力发电机的模型，采用电力仿真软件设计，参数比较适合。-wind energy conversion system PSCAD
ord5mw2lin
- Matlab的双馈风力发电机的5阶模型，学习DFIG的同学可以看看作为参考-Fifth-order model of the doubly-fed wind turbine in Matlab learning the DFIG students can look to as reference
Wind_Turbine_Simulink
- 风力发电机部件及模型，包括风力发电机的变流器、发电机、以及并网部分-Wind turbine components and models, including the part of the wind turbine inverters, generators, and grid
PMSG_PWM4
- 直驱永磁同步风力发电机 simulink仿真模型-Direct-drive permanent magnet synchronous wind turbine simulink simulation model
190887655
- 自己建的双馈式异步风力发电机模型，经过一系列封装后建成的整体模型。-Build the doubly fed induction generator model, and after a series of integrated model of the whole model.
PSCAD
- PSCAD 双馈机风力发电机模型，适用于PSCAD 4.4版本-PSCAD DFIG
DFIG_Tutorials_02-V4.2aX4.4
- PSCAD 双馈风力发电机模型，适用于PSCAD 4.2及4.4版本-PSCAD DFIG
DFIG_Machine_Example
- PSCAD矢量控制的双馈风力发电机模型，可实现PQ解耦控制。--The case is set up to track for maximum wind power utilization. -The power coefficiect , Cp is a function of wid speed/machine speed. As wind speed changes, machine speed is changed to operate at maximum Cp -P and
双馈风力发电机的PSCAD案例
- 各种风机的模型，对pscad初学者有帮助！(Various fan models, useful for beginners pscad!)
双馈风力发电机的PSCAD案例
- 基于pscad的风机建模，以及相关模型文件，大家可以参考一下，有什么意见或建议也可与本人联系。(Modeling of fan based on PSCAD)
DFIG2
- 基于simulink的风力发电机模型。结构详细可以用参考。(simulink DFIG wind turbine model)
DFIM_control_power
- 双馈异步风力发电机的控制模型，用simulink搭建，仿真效果良好！(The control model of doubly fed induction generator is built by Simulink, and the simulation results are good.)
直驱永磁风力发电机
- 以永磁体励磁多极直驱式同步风力发电机组(PMSG)为对象，建立了包括风力机模型、传动系统模型和发电机模型的D—PMsG数学模型，提出了风力机桨距角和发电机转速的控制策略(A d-pmsg mathematical model including wind turbine model, transmission system model and generator model was established, and the control strategy of pitch Angle and
bbbbbbb
- 风力发电机仿真模型，包括风源，风轮机，电动机，在负荷变动是的波形分析(Wind Turbine Simulation Model)
wind——power-PMSG_detailed
- 基于matlab的同步风力发电模型仿真，可以放心下载(Matlab - based synchronous wind power model simulation, you can rest assured to download)
PMSGWindFarm
- 对直驱永磁同步风力发电机组的各个组成部分进行分析，在此基础上建立仿真模型，采用了控制算法来实现最大功率跟踪控制目标。(The components of the direct-drive permanent magnet synchronous wind turbine are analyzed. On this basis, the simulation model is established and the control algorithm is used to achieve the