搜索资源列表
CDTEST
- 开启钱柜(Cash Drawer)和读取钱柜 open / close 的程序。透过对 ICH7 GPIO 的控制。适合生产线的测试应用。-Open Cash Drawer and read open/close the program. Through ICH7 GPIO control. Suitable for production line test applications.
LE366_GPIO
- 針對LE-365所製作的GPIO設定及模擬測試程式-For LE-365 produced by the GPIO configuration and simulation test program
gpio
- dsp程序例子GPIO，在CCS中可以运行-dsp example program GPIO, can be run in the CCS
dsp_f2812_gpio
- 该程序为DSP应用程序，为F2812系列GPIO使用范例，本程序在CCS2000上编译成功，并在开发板上调试成功。-The program for the DSP application, for the F2812 Series GPIO usage examples, this program compiled CCS2000 success and the success in the development of on-board debugging.
gpio1
- Program using gpio tms320c6-Program using gpio tms320c6000
LPC11XX
- 基于32位单片机LPC11xx系列触摸屏显示程序-Based on 32 single-chip LPC11xx series of touch-screen display program
GPIO
- 对dsp初学者来说，是个很好的实例程序，能够进入入门阶段-DSP for beginners, is a good example of the program, can enter the entry-level stage
Camera-capture-program-k60
- 摄像头采集程序 k60，一般的gpio设点，中断以及其子程序的设定-Camera acquisition program K60, general GPIO set, and setting the interrupt subroutine
C-SHARP_USB_GPIO_Test
- 在C#平台调用Ginkgo USB-I2C适配器或者Ginkgo USB-SPI适配器的二次编程接口函数实现GPIO读写控制功能，本程序对GPIO读写控制的各种模式进行了全面展示。-Call Ginkgo USB-I2C adapter or Ginkgo USB-SPI adapter quadratic programming in C# platform GPIO interface functions to achieve control functions to read and wr
ROBOCUP
- 这是足球机器人的程序。该程序的控制芯片是LPC1768，该程序里面包括GPIO,UART,PWM,TIMER等程序模块。-This is the soccer robot program. Control chip of the program is LPC1768, the program which includes GPIO, UART, PWM, TIMER and other program modules.
GPIO
- 基于lpc2368的流水灯程序 自己写的-Lpc2368 of light water-based program to write their own
GpioToggle
- 该程序主要是用f2812来点亮LED灯。其中程序中采用了3种方式对Gpio进行操作。-The program is mainly to light LEDs lamp by f2812. Which the program uses three kinds of ways Gpio operation.
test
- msp430 test program for verify gpio hardware
EXCAMPLE_GPIO
- this the program of stm32 GPIO .this is programm use the STME32ZET6.-this is the program of stm32 GPIO .this is programm use the STME32ZET6.
stm学习中程序
- 其中包含了一个以gpio简单设置的程序以及usart通信和pwm设置的程序(It contains a program that is simple to set up with GPIO, as well as programs for USART communications and PWM settings)
OLED
- 基于STM32的OLED屏的显示程序，里面包含了GPIO的配置，和封装好的读写函数和画点函数(OLED screen display program based on STM32)
ropi3_gpio.tar
- gpio开发剪枝，驱动程序，列表，图片等等，仅供参考(Orange sent one gpio development program)
Transmission
- stm32F429XX 利用dma模块发送数据到gpio，稍加改动可以实现dma采集gpio程序。(Stm32F429XX use DMA module to send data to GPIO, a little change, you can achieve DMA acquisition GPIO program)
3.USART串口测试
- 使用外设：串口线一跟，通过COM1连接PC ** 实验名：【B】USART_TEST ** keil MDK-ARM Standard Version：V4.22A ** 软件库(keil) Version: V2.0.1 ** 固件库(ST) Version: V *************************************/ /*********************************** ** 实验现象： 1、首先进行常规配置(RCC、N
keyboard
- STM32实现读旋转编码器值，读外部按键，并串口发送(stm32 GPIO button program)