搜索资源列表
CS8955TV_source_code.rar
- CS8955控制TV软件。用MCU做模拟电视的控制。,CS8955+TV+TNJ7355(tuner).The CS8955 micro-controller is an 8051 CPU core embedded device targeted for LCD Monitor, LCD TV, Home Appliance, or Consumer Products application. The CS8955 is pin-out compatible with MCS-51
OLED
- LCD module. Support printing of 6x8 8x8 fonts (included in .h files) Could be directly used in your embedded app.
DisplayX
- 检测液晶屏幕好坏的最好的程序，本人一直在用-Detection of the best LCD screen of the program good or bad, I have been in use
KS107.ZIP
- Source code for driver KS107 (LCD display with resolution 128x64 pixels). Files are in assembler and C.
5_AVR_Projects
- Interfacing AVR to LED, Tact switch+7-segment, Matrix Keypad, HD44780 Character LCD and LED dot matrix. Compiler: CodeVisionAVR. Proteus simulation included.
Clock_Alarm
- this source code for displayed clock & alarm in 2*16 LCD and writed in codevisionAVR for useable AVR mcu
23
- 基于FPGA的液晶显示控制器的设计，FPGA用的是EP2C5,LCD用的是ST7920内核的122*32点阵的LCD，显示中西文字符-FPGA-based LCD display controller design, FPGA is used EP2C5, LCD is used in the ST7920 core of 122* 32 dot matrix LCD, display of Chinese and Western characters
12232yc2440
- 在扬创2440核心板上的一个驱动LCD的程序，以摄像CAM口做为IO。-In Jan 2440 the core of creating a driver LCD panel process to camera CAM mouth as IO.
430LCD
- LCD12864在无总线430上的移植，最全的源代码。开发环境 IAR FOR MSP430-LCD12864 in the absence of bus 430 on the transplant, the most complete source code. Development environment, IAR FOR MSP430
contador_lcd
- how to utilize LCD in CCS
LM016LLCD
- 本文介绍了Proteus 中字符型液晶模块LM016L 的结构及其控制器HD44780 的指令 系统，完成了LM016L 与单片机80C51 的硬件接口电路设计及HD44780 控制器的驱动编 程, 实现了LM016L 自定义字符的显示。最后简要介绍了Proteus 仿真调试单片机的方法和 步骤。-This article describes the Proteus in the structure of LM016L Character LCD module and its con
lcd_controller
- Verilog实现的LCD控制器，在实现了LCD接口以及相关的控制时序。-Verilog implementation LCD controller
lcd
- LCD driver for ATMEGA8535 written in ImageCraft V7.1 - driver can be used to drive 16x2, or 16x4 LCD
ucosII_ucGUI_s3c2410_LCD
- 关于ucos-ii操纵系统的应用相关说明,资料比较详细.ucos II+ucGUI+s3c2410+LCD+触摸屏整合-Ucos-ii steering system on the application of the relevant instructions and information in more detail. Ucos II+ ucGUI+ s3c2410+ LCD+ Touch Screen Integration
LCD
- 本程序代码在IAR环境中运行，其主控芯片是LPC2103，通过LCD与LPC2103的连接电路，可以实现在液晶屏上显示汉字字符等-The code runs in the IAR environment, its main chip is the LPC2103, and LPC2103 LCD connection through the circuit, can be achieved in the LCD screen to display Chinese characters, etc.
stepper_motor_control
- Stepper Motor Control GUI In this project an embedded GUI is designed to control the position of a stepper motor. GUI is created by using LCD and Keypad. User can enter the position of the stepper motor via Keypad and LCD provides visual feedback t
LCD
- VHDL语言由1206显示rom中的数据-VHDL language rom in the data from 1206 show
LCD
- 4418上的LCD驱动，可实现点亮LCD，已经在开发板通过实验(4418 on the LCD driver, can achieve light LCD, has been in the development board through the experiment)
3
- driving a 1602 lcd in c by codevision avr
LCD显示汉字（字库放SD卡）
- 将字库存入SD卡中，使用LCD显示字库中汉字(Store the font in the SD card and display the Chinese characters in the font using LCD.)