搜索资源列表
BLDC-driver
- linux2.4.18下基于s3c2410的电机控制器驱动程序的PWM驱动以及测试程序-linux2.4.18 Based on s3c2410 the PWM motor controller driver and test driver program
stepmotor
- 这是pxa270的步进电机驱动程序，测试功能完好，能加深对Linux内核的理解-This is the PXA270 stepping motor driver, testing features intact, can deepen their understanding of Linux kernel
stepmotor
- 嵌入式LINUX步进电机驱动试验程序，可以配合ARM开发板或试验箱来实验-Embedded LINUX stepper motor-driven testing procedures
pasteco-20030108.tar
- Linux下电机驱动程序，驱动学习的好资料。该资源来源于互联网。-Linux under the motor drive, a good data-driven learning. The resource from the Internet.
ftp628_printer
- 这是在LINUX2.6.28下的FTP-628的驱动.编入内核即可.应用程序一次送入两行点阵数据,384*2个点阵,因为步进电机一步需要两行数据.在硬件上,请自行处理MOTO信号,和STB信号.可能PIN要先对.本人运行过了.没有问题.-This is LINUX2.6.28 under the FTP-628 driver. Can be incorporated into the kernel. Once the application data into two rows of dot m
stepmotordriver
- 该程序是一个基于s3c2440的步进电机驱动程序和测试程序，编译内核版本为linux-2.6.13。-The program is a stepping motor based s3c2440 drivers and test program, compile the kernel version is linux-2.6.13.
stepmotor.tar
- 步进电机的驱动程序，可以进行频率设置，占空比设置。-Stepper motor driver can set the frequency, duty cycle settings.
LinuxDriverForStepper
- 步进电机在Linux的驱动程序，CPU为S3C2410-Stepper motor driver in Linux, CPU to S3C2410
io
- Linux下C语言实现IO接口的驱动程序，主要包括：数码管显示、电机驱动、按键驱动以及Led驱动。-IO interface for Linux drivers, including: digital control, motor drives, key drives, and Led driver.
MotorDriverAndApplication
- 这是linux下步进电机的驱动程序（分别适合与电机连接到IO口与连接到中断或总线的情况），并分别附有相应的上层应用程序，可以用来测试驱动。-This is under linux stepper motor driver (for, respectively, with the motor connected to the IO port and interrupt or bus connection to the case), respectively, with corresponding
STEPMOTOR_L298DRVtest
- 用于L298N的交流电机驱动，本代码用于步进电机正传两相八拍的程序。-For L298N AC motor drive, the code for stepper motor True Story of two-phase eight-beat program.
STEPMOTOR_L298DRVtest
- 用于L298N驱动控制步进电机，本代码是其中的两项四拍程序。-For L298N drive control stepper motor, the code is one of the two four-beat program.
step-motor-control-system
- 简单步进电机驱动代码,基于AT89S52单片机。vc++界面程序等 适合本科生用作参考-simple step motor code for students test
motor
- mini2440的两路pwm驱动程序，可以控制直流电机的正反转和转速-mini2440 two PWM driver, you can control the the positive DC motor and speed
rightMotorContr.c
- MicroMouse618上的右步进电机驱动时序优化程序，2013版本-On the right MicroMouse618 stepper motor driver timing optimization program, 2013 version
drivate
- 这是2410控制步进电机的驱动程序，仅供参考。-This is the driver it is trying to control a stepper motor
my-share12
- EPOS电机驱动程序及其应用程序和UDP编程的代码内容-The driver of EPOS motor and its applications and UDP programming code
Brushless-motor
- 无刷电机的驱动程序源代码，是在linux开发环境下开发使用-Brushless motor relay driver source code is developed using the linux development environment
motors_test
- TQ2440开板板上的电机PWM驱动程序，可以实现前进、后退、转弯、变速等功能。-TQ2440 open PWM motor driver on the plate board, can achieve forward, backward, turn, speed and other functions.
HW-GMS-Project20140513
- BlueCore4 Datasheet BC417143 ·APF有源滤波控制器程序，因为改代码 ·利用51单片机实现DS1302的驱动，以C ·利用STM8L实现诺基亚5110液晶的驱动 ·盛群单片机指令集:简体中文，PDF格 ·SHT11 程序，I2C总线方式。写I2C时 ·7寸彩屏 STM32的固件库3.5 FSMC驱动 ·一种伺服电机的PID控制算法，可以完 ·基于Atmega16单片机的机器人行走、 ·51单片机驱动2.6英寸触摸液晶屏幕， ·s