搜索资源列表
LED_ATmel9200
- 这是我学习驱动开发的第一个小程序. 控制LED灯的开和关. 共有两个文件 gpioctl.c 是驱动程序, main.c是LInux下的测试程序.
linux-mini2440.rar
- ARM9开发的13个例子源程序，用C语言写的，在mini2440编译通过，包括按钮，LED灯控制，PWM蜂鸣器报警等源代码。,ARM9 development of 13 examples of source code, written using C language, compiled in mini2440 through, including buttons, LED light control, PWM buzzer alarm, such as source code.
arm_led_interrupt
- 在s3c6410上实现采用中断按键控制led灯点亮，裸板驱动(c语言)-to bright the led with c throght loop
cgi_led
- 实现了led灯的远程控制!这是其代码实现过程-led realize
leds_driver
- 第一个LED灯控制驱动 (基于AT91SAM9260开发板linux2.6.22) -The first signal-controlled LED driver (based on the AT91SAM9260 Development Board linux2.6.22)
s3c2410wz
- 该资料是通过GSM模块控制S3C2410开发板的程序，使用短息控制板子上的三个LED灯的亮灭。-The information is controlled through the GSM module S3C2410 development board' s procedures, using the short rate control board on the bright three LED lights off.
modekey_driver
- 基于linux2.6.24内核的控制s3c2440按键和led灯的驱动和测试程序-Kernel-based linux2.6.24 control buttons and led lights s3c2440 drive and test procedures
leddd
- 一个简单的可以在S3C2410开发板上实现的点击触摸屏控制led灯的程序！-A simple S3C2410 development board can be implemented in the touch screen controls led lights click on the program!
led_driver
- led灯的驱动，仅仅实现了对其的亮灭控制。-led control
s5pc100
- 利用平台设备机制，对s5pc100实现按键对Led灯的控制，按下点亮，松开熄灭-Use platform equipment mechanism to realize s5pc100 buttons on the control of Led lights, press the light, loosen put out
leds-gpio
- 控制led灯的驱动程序，也就是流水灯，程序中有4个led灯，依次按照先后顺序亮与灭-Control driver led lights, light water, 4 led lights in the program, followed in accordance with the sequence of bright and off
key-and-led
- stm32的可用驱动模板，通过简单的按键控制流水灯来实现-the stm32 available driver templates, through the simple push-button control of light water
LED_driver
- 控制一个LED灯的驱动 开发板是S3C2440-Control an LED lamp driver S3C2440 development board
eduk4-key
- /** *summary：本驱动目的为按键控制LED灯的状态 *descr iption：Edkit-VI试验箱中有4个LED灯和2个按键 * 我们用按键1来循环选择你要控制的LED * 按键2来控制LED的状态 * 按键2的操作将在按键1选择的LED上执行 * 初始状态下选择的LED为亮 * 当你按下按键2后选择的LED变为闪烁状态 * 再按一下后选择的LED变为熄灭状态 *author： * * */ /-/ The
led_analog_traffic_light
- /** *本程序目的为控制LED灯模拟红绿灯 * 具体：Edkit-8试验箱中可以介入4个LED灯，但我们只用其中的3只 * 规定第1只表示红灯，每次亮20秒 * 规定第2只表示黄灯，每次亮5秒 * 规定第3只表示绿灯，每次亮20秒 *开始时红灯先亮，然后黄灯、绿灯依次亮。循环反复 *每次灯切换时会有3秒的闪烁时间 * * *gcc -o led_analog_traffic_light led_analog_traffic_light
csu_led
- LINUX 下对LED灯的控制的驱动程序-LINUX drivers under the control of the LED lights
LED
- RM9 2400开发板LED灯中断控制源码-failed to translate
led
- 用do-while语句控制P0口8位LED流水点亮，压缩包内还包括一个点亮单个LED流水灯的代码，适合初学者参考吧。-Do-while statement P0 port 8 LED lit water, compressed package also includes a light single LED light water code, suitable for beginners reference.
LED
- linux系统下LED灯采取中断形式GPIO控制-in linux LED lights take the form of an interrupt GPIO control
LED
- 点亮P1口的一个LED灯 该程序是单片机学习中最简单最基础的， 通过程序了解如何控制端口的高低电平-A leds light up P1 mouth The program is the basis of a microcontroller learning one of the most simple, Through the application to know how to control the high and low level of port