搜索资源列表
Sourcecodes
- Linux环境下的S3C2410中NandFlash基本操作编程-Linux environment under which the S3C2410 NandFlash basic operation Programming
linuxnandflash
- linux代码分析详细nandflash驱动-detailed analysis of Linux code nandflash Drivers
nandflash
- 三星公司的ARM44B0的NANDFLASH测试程序
NandFlash
- ixp425 NANDFlash 源码
mtd_k9g8g08u0a
- nandflash k9g808u0a在pxa270的驱动,由于pxa270没有nandflash接口，所以通过pc card接口进行模拟
nand_write_yaffs
- uboot nandflash 启动补丁文件，与大家分享
bootloader
- ⑴ 提供简单命令 A、通过串口加载程序到指定内存 B、将程序烧写到 NANDFLASH 指定位置 C、LCD 操作函数 I、画点 II、画线 III、画圆 IV、显示图像 ⑵ bootloader 具备自我更新能力 ⑶ bootloader 可以启动 LINUX ⑷ 能通过网络传输文件（FTP/UDP）
Bootstrap-v1.15 ATMEL AT91SAM9260 的BootStrap
- ATMEL AT91SAM9260 的BootStrap，官方下载的编译后大于4K，该源码经过优化后编译出的NANDFLASH 启动代码小于4K-ATMEL AT91SAM9260 BootStrap, the official download compiled larger than 4K, after compiling the source code optimized out of the boot code is less than 4K NANDFLASH
cramfs_with_chechking_badblock
- 之前的cramfs不支持有nand坏块的nand。现在的cramfs，已经可以在有坏块的nand上运行了。,Cramfs before nand does not support bad block nand. Now cramfs, has a bad block in a run on the nand.
u-boot-1.1.6-nand
- 成功修改u-boot1.1.6,支持从nandflash启动。-Successfully modify the u-boot1.1.6, support from the nandflash start.
Hardware_Test_Programs
- ccs下对dm6446的测试程序，能够检测ddr,nandflash,uart,usb等硬件电路的裸板测试代码，包含库文件，板级gel文件，开发环境在TI ccs3.3下。-ccs on DM6446 testing procedures can detect ddr, nandflash, uart, usb hardware such as the bare circuit board to test the code, including library files, board-leve
u-boot-1.3.1-2410_nandflash
- u-boot完全移植到2410下，实现了nandflash的读写操作。-u-boot fully transplanted to 2410, the implementation of the NANDFLASH reading and writing operations.
mac_drv-c
- 芯片为 arm s3c2410，嵌入式linux系统，内核版本为2.4.18.读写指定nandflash 地址 内容驱动程序。用于保存网络芯片的mac地址。内核在启动时调用该地址内容作为mac地址。 -read/write nandflash data driver.save mac address.
PXA270-SVxWorksBSP
- intel xscale 运行VxWorks所需要的BSP-A vxworks bsp for intel xscale.
nandflash
- nand flash相关资料，以及mtd源码（包括源码分析）-nand flash-related information, as well as mtd source code (including source code analysis)
u-boot-2440-nandflash.tar
- u-boot-2440-nandflash，2440上的源代码，2440开发板资料-u-boot-2440-nandflash, 2440 on the source code, 2440 Development Board Data
uImage
- kernel-2.6.24.1 适合FL2440板 请写到nandflash 0x60000处-kernel-2.6.24.1 for FL2440 board please write nandflash 0x60000 Service
nandboot-1.0
- nandflash启动代码，开机直接从nandflash 启动-nandflash boot，bootStart。。。
atmel_nand
- Linux 2.7.34下的atmel nandflash驱动-Linux 2.7.34 atmel nandflash driving under the
nandFlash
- nandflash 驱动编程源代码、可以驱动nandflash .希望对大家有帮助。-nandflash program.it can driver the nandflash of arm11.