搜索资源列表
MS12XF512_PWM_v00.rar
- FlexRay pwm测试程式(失败板 但可以写入记忆体),FlexRay pwm test program (failed board but you can write to memory)
BLDC-driver
- linux2.4.18下基于s3c2410的电机控制器驱动程序的PWM驱动以及测试程序-linux2.4.18 Based on s3c2410 the PWM motor controller driver and test driver program
2410_pwm
- 一个基于S3C2410 的 PWM 蜂鸣器驱动及测试程序 -a PWM bell driver and test program based on S3C2410
pwm
- PWM测试程序，在LINUX环境下运行该测试程序。-PWM test procedure, in LINUX environment to run the test program.
PWMtest
- arm744b0x的pwm测试程序，对于一般arm7实验板应该可以用-arm744b0x the pwm test procedures, for the general arm7 experimental board should be able to use
examples
- mini2440上运行的最新源码，包含LED、显示测试、USB、PWM测试等-mini2440 running the latest source, including LED, display test, USB, PWM tests, etc.
mypwm
- 基于mini2440 pwm的驱动与测试程序-Based on the mini2440 PWM driver and test procedures
8-test-light
- linux编写的pwm的驱动，可以用pwm控制led暗亮-the linux written PWM drive, you can use pwm control led dark light
s3c2440_linux_pwm
- 基于mini2440开发板的linux下s3c2440的pwm驱动程序，实际测试验证，程序可正常运行，方便移植到其他开发平台。-Under mini2440 development board based on linux s3c2440 pwm driver, actual test, the program can run normally, easily ported to other development platforms.
pwm_test
- Tiny6410 pwm function test
linux_pwm_timer_spi_driver
- am1808 linux pwm,spi,timer的驱动，ko形式，带测试代码-am1808 linux driver for spi,pwm,timer,and test app
wvm_pwm
- 软件：linux的PWM蜂鸣器驱动，内核3.4.91 硬件：mini2440 驱动简单易懂，注释完善，测试通过。- Software: linux the PWM buzzer driver, kernel 3.4.91 Hardware: mini2440 Driver straightforward, notes perfect test.
test-libunwind
- Device-Tree bindings for Atmel s HLCDC (High-end LCD Controller) PWM driver.
pwm_driver
- linux环境下，基于arm9的两路PWM驱动，含测试程序-Under linux environment, based on two PWM arm9 drive, including test procedures
FreqMeasure
- 可以测试PWM脉冲宽度，很好用的参考代码，希望能帮到你-You can test the pulse width of the PWM, very good reference code, I hope to help you
mini2440pwm_test
- mini2440的pwm测试程序，程序没有大的变动，我只是把注释详细了，也有我对部分程序的理解-The mini2440 PWM test program, a program has the change, I just put the annotation detailed and also have I to the understanding of the part program
s3c2440_linux_pwm
- 基于mini2440开发板的linux下s3c2440的pwm驱动程序，实际测试验证，程序可正常运行，方便移植到其他开发平台。-Under mini2440 development board based on linux s3c2440 pwm driver, actual test, the program can run normally, easily ported to other development platforms.
project
- pwm驱动编写，makefile文件，测试程序中有进程创建和使用。-pwm drivers prepared, makefile files, test procedures in the process to create and use.
driver
- 1. 硬件基于HC-SR04模块，可自行查找。 2. 代码PWM模块用于测试中断响应性能， 背光部分注释掉是因为和PWM复用了。 3. 测试中断响应性能时不要使用在中断上半部使用printk()方式，否则延时会到ms级。 4. 代码中注册的字符设备可不需要，创建的内核线程用于控制时序。 3. 由于超声波采用的是普通的GPIO中断，而且精度需要达到us级，当有许多高优先级的中断需要处理时， 驱动响应会延迟导致得到的时间不同，稳定性会大大下降，只可作为参考，如果要商用最好使用专用
button_pwm
- 通过按键控制PWM占空比，包括驱动和测试程序-Control PWM duty cycle by key，include driver and test program