搜索资源列表
s3c-u-boot-1.1.6_rel-4-3-2_20080917.tar.bz2
- 三星强片S3C6410开发板的bootloader源代码，注意为了能上传通过，在文件后缀添加了.zip，可以在下载完成后去掉这个后缀-Samsung S3C6410 film development board' s bootloader source code, pay attention to in order to be able to upload through the file suffix added. Zip, can download to remove the suffix
u-boot-1.1.6
- Uboot学习笔记！！ ！很好的哦-Uboot study notes! ! ! ! ! Oh good! ! ! ! ! ! ! !
u-boot-1.1.4.tar.bz2
- u-boot-1.4.4的源代码 适合嵌入式开发的朋友。 因为后缀名不支持bz2，我在后面加上了gz。下载后重命名为bz2的后缀即可-u-boot-1.4.4 source code for embedded development friends. Because the suffix does not support bz2, I insert a gz. After downloading named for the suffix can bz2
u-boot-1.3.4_onenand090812.tar
- s3c6410支持Onenand启动的uboot
m8_u-boot-1.3.4-sscr_onenand.tar
- m8 s3c6410 linux android启动的uboot
s3c-u-boot-1.1.6_rel-4-3-1_20080811.bz2
- This directory contains the source code for U-Boot, a boot loader for Embedded boards based on PowerPC, ARM, MIPS and several other processors, which can be installed in a boot ROM and used to initialize and test the hardware or to download and
uboot_1.3.4.tar
- 210的UBOOT源码，UBOOT-1.3.4-210 UBOOT source, UBOOT-1.3.4
uboot2010.09_fl2440
- 1.这是针对FL2440开发板的u-boot-2010.09版本移植代码补丁，请先下载原版u-boot-2010.09代码； 2.然后解压u-boot-2010.09代码，并把补丁文件uboot2010.09_fl2440.patch放在uboot的同级目录，进入uboot目录。 3.打补丁：patch -p1 <../uboot2010.09_fl2440.patch 4.配置是输入：make fl2440_config， 5.然后执行make即可执行生成u-boot.b
u-boot_mod-master
- ar9331 uboot U-Boot 1.1.4 modification for routers