搜索资源列表
l_ipp-PCA-MPEG4-encode_p_4[1].0.003
- Intel提供的在PCA(例如Sitsang开发板)使用IPP4.0库的MPEG-4编码源程序-provided by the Intel PCA (eg Sitsang Evaluation Board development board) using IPP4.0 for MPEG-4 encoder source
mp3_encoder
- Linux下的intel的ipp库使用，完成MP3编码，嵌入式PCA平台，适用PXA270开发板-under Linux intel ipp library to use the complete MP3 encoding, PCA embedded platforms, application development board PXA270
gdb-5.0.tar
- arm-linux-gcc编译器，S3C2410开发板移植目前最新的linux2.6.14的内核，需要使用这个编译器编译-arm-linux-gcc compiler, the S3C2410 development board transplant at present the newest linux2.6.14 essence, needs to use this compiler to translate ,Unix_Linux,嵌入式Linux/Embeded Linux -arm -
s3c2410fb_driver
- 友善臂开发板上使用的S3C2410，2.6内核的LCD驱动，源码包以及移植方法。
touchscreen
- 友善臂开发板上使用的触摸屏驱动，s3c2410，2.6内核下使用
digit
- 数字电压计是个实验例子，她使用FPGA开发板的AD、DA接口开发的数字电压表
touchscreen
- omap5910开发板的关于触摸屏的测试程序，通过ccs建立工程可以使用
SBC2410_examples_for_linux
- 友善之臂SBC-2410X开发板所使用的测试程序包，含源代码，很有参考价值！
Xinlinx_Spartan3E500_RevD_10.1
- 这个是我使用xilinx EDK 10.1建立的用语移植petalogic的uclinux发行版本petalinux-v0.4-rc2的Platform工程，开发板使用的是Spartan3E Starter Kit。在这个基础上可以直接裁剪内核后在FPGA中运行uclinux。内核源码可以到developer.petalogix.com下载。,This is a xilinx EDK 10.1, I use the term established by the uclinux transpla
keypad.zip
- 在QT4.5编程环境下写的一个数字软键盘程序。类似计算器上的数字键盘。具体开发过程中，在没有软键盘的开发板程序开发中，可以直接拿过来使用。,QT4.5 programming environment in a number of written procedures for the soft keyboard. Similar figures on the calculator keyboard. Specific development process, the soft keyboard i
uart
- 基于linux2.6内核编写的,使用Qt4开发的,串口通讯程序,已经在TX2440A开发板上调通,使用串口2通讯.-Based on linux2.6 kernel written using Qt4 development, serial communications program, has been raised through the TX2440A development board, using the serial communication 2.
SBC2440I_Linux_Guide
- 用于SBC2440-I开发板的LINUX使用手册-SBC2440-I for the LINUX development board user manual
CAN
- CAN总线驱动程序和测试程序，基于ARM2410+linux2.4开发板的源程序和驱动，已全部通过测试检验，程序可以直接使用-CAN bus driver and the test procedure, based on the ARM2410+ linux2.4 source development board and driver have been tested to pass the test, the program can directly use
redboot_2.0.orig.tar
- reboot源码。能正常使用，成功可移植到开发板！-Source reboot. Normal use, can be transplanted to the success of development board!
linuxexamples
- mini2440开发板的示例代码，很适合初学者学习使用-mini2440 development board sample code, it is suitable for beginners learning to use
webserver
- 这是一个简单的webserver程序，实现开发板和pc机之间的互访，使用到了TCP协议和linux下的网络编程知识。-This is a simple webserver process to achieve development board and the exchange of visits between the pc machines used to the TCP protocol and knowledge of network programming under linux.
Bootloader
- 基于三星2410开发板的BOOT程序的原代码,使用VIVI开发.其中有部分内容有修改-2410 development board based on Samsung' s BOOT program source code, use VIVI development. Some of them modify the contents of
KeyDriver
- 自己开发的源码，其中key_driver\irq_button\irqs_buttons.c是arm2410开发板上的使用中断的按键驱动。-Develop their own source code, which key_driver \ irq_button \ irqs_buttons.c is arm2410 development board using the interruption key driver.
s3c2410wz
- 该资料是通过GSM模块控制S3C2410开发板的程序，使用短息控制板子上的三个LED灯的亮灭。-The information is controlled through the GSM module S3C2410 development board' s procedures, using the short rate control board on the bright three LED lights off.
iTOP-4412_Manual_V12
- 迅为iTOP-4412开发板使用手册 V12-TopEET iTOP-4412 user reference manual V12