搜索资源列表
LEDcontroller
- LED控制 ARM LPC2129 汇编程序-LED control LPC2129 ARM assembler
led-driver
- LINUX下控制LED屏的驱动程序，可以实现内存映射功能-LINUX LED screen under the control of the driver, can be achieved memory mapping function
lpx2103+ENC28J60
- 程序改写来自atmega88+enc28J60,没有做什么优化,看起来 有点乱.供大家参考参考~ 可以通过网页访问192.168.1.1/123456 来控制LPC2103模块上的led
switch_led
- 对富士通frv400架构，redhat为内核的嵌入式系统编写了对LED，和开关的驱动程序，通过按键产生中断控制LED的熄和灭
LED_ATmel9200
- 这是我学习驱动开发的第一个小程序. 控制LED灯的开和关. 共有两个文件 gpioctl.c 是驱动程序, main.c是LInux下的测试程序.
linux-mini2440.rar
- ARM9开发的13个例子源程序，用C语言写的，在mini2440编译通过，包括按钮，LED灯控制，PWM蜂鸣器报警等源代码。,ARM9 development of 13 examples of source code, written using C language, compiled in mini2440 through, including buttons, LED light control, PWM buzzer alarm, such as source code.
leds_driver
- 第一个LED灯控制驱动 (基于AT91SAM9260开发板linux2.6.22) -The first signal-controlled LED driver (based on the AT91SAM9260 Development Board linux2.6.22)
QQ2008
- LED的控制和使用,这里主要介绍的是LPC2106的控制程序和应用。-LED control and use of, this is mainly being introduced is the LPC2106' s control procedures and applications.
pxa270_gpio_led
- pxa270下利用mmap函数实现LED控制的函数，直接在用户层操作具体的IO口来控制LED，推荐！-pxa270 next LED control function implementation using mmap functions operate directly on the user level of specific IO port to control the LED, recommended!
led_water_minigui
- 这是的MINIGUI程序，对mini2440的LED进图形化控制，希望大家可以参考一下，欢迎大家下载-This is an example of minigui in use!
Remote_Control_System
- 这是一个远程控制系统，内含两个程序，主控机程序实现Linux环境下基于minigui的图形界面，控制单元程序实现基于Easy ARM 2103的led控制-This is a remote control system includes two procedures, Main Controller Program Realization Linux environment minigui-based graphical interface, the control unit program i
led_drivetest
- 简单linux下控制ARM开发板的LED驱动程序(适合初学者)-Simple linux ARM development board under the control of the LED driver (for beginners)
leds-uart-no
- leds-uart-no 串口控制led 嵌入式lkinux入门级源码，2440裸奔串口控制led 嵌入式lkinux入门级源码，2440裸奔-leds-uart-no serial control led embedded lkinux entry-level source code, 2440 serial control led streaking entry-level source embedded lkinux, 2440 streaking
s3c2410wz
- 该资料是通过GSM模块控制S3C2410开发板的程序，使用短息控制板子上的三个LED灯的亮灭。-The information is controlled through the GSM module S3C2410 development board' s procedures, using the short rate control board on the bright three LED lights off.
39709555robocup2d_from_UVA
- LED智能显示屏是由微型计算机控制，以LED矩阵板作显示的系统，可用来显示各种文字及图案。该系统中的行驱动器和列驱动器均可采用高β、高速低压降的达林顿管-Intelligent LED display is controlled by a micro-computer to plate for LED matrix display systems, can be used to display various characters and designs. Line in the system
led_dev_and_led_test
- 一个在友善mini2440板子上控制led的驱动程序和应用程序，通过混杂设备模型实现，通过完整的ioctl设备方法实现规则实现，友善之臂提供的源码没有利用完整的ioctl实现规则,这里的代码多了ioctl命令定义，ioctl命令检查。在应用程序中多了一个获得led状态的功能。里面附代编译好的模块和程序，可直接加载到mini2440板子上进行实验。-A control board in a friendly mini2440 led drivers and applications, throug
hi_gpio.tar
- hi3518e控制LED，识别按键的驱动与测试程序(Hi3518e control LED to identify key drivers and test programs)
work2
- arm开发基础，用按键控制led等，内嵌汇编。(Assemble the LED running lamp)
LED
- 通过QT界面控制开发板上的LED，能实时进行亮灭(Control the LED on the development board through QT interface)
9028123
- 利用LPC2104内部的RTC的增量功能进行1S的定时,当定时时间到时,取反LED控制,()