搜索资源列表
demoRS232
- Linux下串口驱动,满足快速数据收发,属于异步通讯-serial driver in the Linux which will satisfied the qick reciever and transmitter
chuankou
- 串口应用程序，波特率为115200,1起始位，8数据位，2停止位。已通过测试。-Serial applications, the baud rate 115200,1 start bit, 8 data bits, 2 stop bits. Has been tested.
myLinuxSerialportTools
- 1：支持串口数据16进制格式收发。 2：支持9以上的串口通信。 3：支持自动收发保存数据。 4：自由控制数据显示。 5：实时显示收发数据字节大小以及串口状态。 6：智能清空缓冲数据。 7：采用polling模式，以便移植到linux。 8：全中文对话框。 9：数据收发精准，增加延时处理。 10：支持短信猫调试，智能识别回车符。 11：界面清爽，布局人性化。 -1: Support for sending and receiving serial dat
Tinyos
- 通过串口采集telosb节点采集的温湿度数据的程序-Telosb node temperature and humidity data acquisition program collected through the serial port
serial
- linux下串口接收发送视频设备采集的数据，很好的控制了视频速率-linux serial port to receive data collected by sending video equipment, control the rate of the video
CSerialComp
- linux下，c++类，作用：对串口数据的读写-the under linux, c++ class, role: serial data read and write
NewRoutTest.tar
- 串口通讯,该软件用于测试串口间的通讯及数据测试。-Serial communications, the software used to test the serial communication and data testing.
imap210_uts_rt
- 基于串口的，linux触摸屏驱动，根据协议，把从串口读到的数据转换成按键触摸事件上报-it s a linux driver base on serial
chuankou
- 串口通信数据简单处理 加一 开方 数制转换等功能-Simple serial communication data prescribing treatment plus a number system conversion functions
ts_uart_read
- linux 串口读触摸屏数据的应用程序，用于串口TP-linux UART APP for reading touchpannel
uart
- uart 串口驱动。串口数据传输是以串行方式进行的。串口在数据通信中吗，一次只能传输一个比特的数据。-uart drivers
receive
- Linux下实现打开串口，从串口读取数据，并写入特定文件中的功能。-Achieve the Linux open the serial port, serial data read from and write to a specific file functions.
mygps
- Linux环境下通过串口接收gps数据，并将其中有用的数据解析存放在结构体中，并打印出来。在mini2440下可以成功运行。-Linux environment through the serial port to receive gps data and useful data which is stored in the structure of the analytical and print it out. In mini2440 can run successfully.
uart_lcd
- 用于EDA中的串口通讯的实现。用串口精灵将数据传输到LCD上并将其显示出来。-EDA for the implementation of serial communication. With serial wizard to transfer data to and displayed on the LCD.
maibo
- 主要通过脉搏传感器与arm连接，编写一个简单的串口通信函数，实现脉搏数据采集。-Mainly connected through a pulse sensor and arm, write a simple serial communication function, to achieve the pulse data acquisition.
ttys
- Linux下串口编程，打印接收到的数据和本地时间-Serial programming under Linux, print the received data and the local time
yocto_com_test
- yocto平台下的测试串口的例程，可设置串口速率等参数，会启动一个线程去接收串口数据，同时也可向串口中写入数据-Yocto platform test serial port routines, can be set parameters such as rate of serial port, will start a thread to receive serial data, at the same time also can write data to the serial port
MagTek-DatasheetPsource
- 用51单片机和magtek实现磁卡三个磁道的解码，并读取磁卡的数据，输出到串口。-With 51 single-chip microcomputer and magtek swipe CARDS three track of decoding, and reads the file data, output to the serial port.
linuxserial
- Linux串口测试程序,可读写和修改串口数据-Linux serial test program, read and modify the serial data to write and modify
ds18b20
- 温度传感器试验，由串口打印采集数据,包括驱动程序-Temperature sensor test, the data collected by serial print