搜索资源列表
61IC_S84
- DM6467 源码，很好的ARM入门资料，可以直接载入-DM6467 source code，good arm study file，you can load directly
0V9650-drive-application-source-code
- 编译器必须为 3.3.2 编译时候要加参数 1)加载模块：insmod s3c2440a_camif.ko (设备节点为：/dev/v4l/video0) 2)运行程序：./ov9650_init (通过iic初始化ov9650芯片,运行一次即可) 2)运行测试程序：./testcamera (加-h可查看参数说明) 注： 1)驱动模块中不含摄像头芯片的iic初始化，初始化部分位于ov9650_init中。 2)若文件系统不支持2.6下的insmod命令，请
armboot-1.1.0
- arm的bootloader启动代码，版本为1.1.0，可以在此基础上进行修改即可-arm of the bootloader startup code, version 1.1.0 can be modified on this basis can
arm-Linux-driver-part1
- 嵌入式Linux系统工程师必修实验代码上分章节讲解-driver code
EMERSON
- linux 艾默生直流系统通讯协议通讯协议代码，标准c++代码，支持3种编译器：xscale_be-g++，arm-linux-g++，mxscaleb-g++，可做参考学习用。 -Linux Emerson dc system and communication protocol communications protocol code, standard c++ code, support three compiler: xscale_be-g++, arm-Linux-g++, mxs
temp-hum
- 温湿度传感器的数据采集完整代码， 在linux环境下，ARM处理器实现，可以采集温湿度传感器数据-Temperature and humidity sensors, data acquisition complete code in the linux environment, the ARM processor, temperature and humidity sensor data can be collected
ARM
- arm启动代码详细注释，包含如何启动，如何运行，如何使用驱动-arm startup code detailed notes, including how to start, how to run, and how to use the drive
ARM--Linux-device-driver-code
- ARM嵌入式Linux设备驱动实例开发代码-ARM embedded Linux device driver instance to develop code
MCU_905
- ADS集成编译环境下的ARM开发板USB摄像头驱动源代码-ARM development board USB camera driver source code under the ADS Integrated Environment
wav-tool
- 录音放音 LINUX C 代码 ， 可用于嵌入式， 已成功交叉编译移植，请参考说明-wav record and wav play , LINUX c code , can be used in arm and other platform , please read instruction
camera
- OV9650全套源码，以及摄像头测试程序，用arm-linux-gcc即可编译成功-OV9650 full source code, and camera test program, with arm-linux-gcc to compile successfully
Cs8900
- ARM嵌入式开发板网卡8900驱动程序Linux代码-ARM embedded development board NIC 8900 Driver Linux code
tslib-1.4.tar
- arm开发板的触摸屏驱动代码，在arm端的可以让触摸屏定位，操作-arm development board touch screen driver code，Allows the touch screen of the arm end position, operating
zlg7289A-driver
- To play with 7 segment LED in ARM dev Kit. Linux driver module code is uploaded. User module code also worked
from51-to-arm-and-led-test
- 从51单片机到arm的入门教程，以及简单的流水灯测试实验的代码，对于初学者比较有帮助-51 microcontroller arm introductory tutorial, as well as the simple code of the light water testing laboratories, more help for beginners
camera-test
- linux 摄像头驱动测试程序，arm-linux-gcc，测试过，可用-linux camera test source code,arm-linux-gcc
GPIO_KEYS
- 该源玛是用在博通ARM BCM2835 linux平台下的按键驱动，目前将该按键其用于高清播放器的导航键控制-This source code is a gpio-keys driver which is used for Broadcom IC BCM2835.
serial-UART-code
- 串口UART代码.环境是IAR，ARM是STM32F051-Serial UART code. Environment IAR, ARM is STM32F051
can4linux-code.tar
- linux操作系统下的CAN驱动，适用于kernel 3.10以前的版本。可以用于arm、ppc等平台-linux operating system CAN driver for kernel 3.10 the previous version. Can be used to arm, ppc and other platforms
arm9-key-code
- 这个程序是用在arm板 linux 驱动开发。功能是矩阵按键的驱动，在很多智能系统中都有涉及，这个文档介绍了设计思想。-This procedure is used in the arm plate linux driver development. Function keys matrix driver, in many intelligent systems are involved, this document describes the design concept.