搜索资源列表
checkdevice
- dektec卡是服务器播放码流的一种卡，为了防止卡出现故障，这是根据公司要求做的卡的故障检测，错误的卡通过闪灯提示。对于一些新的dektec卡，可能需要上官网下载最新驱动。附了dektec开发文档。-dektec server playout card is a card, in order to prevent card failure, which is required to do according to the company s card fault detection, error
h-flasher
- 要使用H-JTAG更新bios，你或许会遇到NOR Flash型号无法识别的问题，其实最新的H-jtag软件已经支持了市面上绝大部分nor flash型号，你可以自己修改H-Flasher脚本-To use the H-JTAG update the bios, you may encounter the problem of NOR Flash Model unrecognized, in fact, the H-the jtag software to support the market,
linuxDR
- 嵌入式linux设备驱动是嵌入式系统中十分重要的组成部分。本书详细讲解了嵌入式linux的各种设备驱动，包括字符设备驱动、数字显示驱动、键盘驱动、a/d驱动、d/a驱动、lcd驱动、触摸屏驱动、can总线驱动、iic总线驱动、音频总线驱动、ide接口驱动、闪存芯片驱动、usb驱动、串口驱动、网络设备驱动等，并结合大量实例进行讲解，读者可以快速熟悉和掌握相关知识。 -Embedded linux device driver is a very important part of embedd
NandFlash
- nand flash 启动代码，可以移植到别的开发版上面-nand flash boot code can be ported to other development version of the above
unsp_boot
- 几乎全部C语言写的bootloader，适用于S3C2410的开发板，支持Nand flash和Uart。-S3C2410 development board suitable for almost all of the C language to write the bootloader support Nand flash Uart.
nvram
- 实现对flash的nvram分区的读写操作-Read and write operations to flash the nvram partition
my_bootloader
- arm中bootloader的编写，初始化硬件，把内核从NAND FLASH读到SDRAM，跳转执行内核-arm in writing the bootloader to initialize the hardware, the kernel reads from NAND FLASH SDRAM, set the "parameters to be passed to the kernel," jump execution cores
Uboot_Flash
- 烧写映像文件到SPI Flash 烧写映像文件到SPI Flash 烧写映像文件到SPI Flash-Writing to the SPI Flash programming image file image file image file to SPI Flash programmer to SPI Flash programming image file to SPI Flash
s5pc100_m25p10a
- 基于S5PC100平台的FLASH驱动程序源码，通过SPI总线实现对数据的读、写及清除。-FLASH-based S5PC100 platform driver source code to achieve the data read, write and clear through the SPI bus.
STM32F4xx_StdPeriph_Templates
- dsp解壓縮 IAR版本 I have written a simple program for the STM32F4 Discovery board that plays a short mp3 file flash memory. For the decoding, the fixed point version of the Helix mp3 decoder is used. The audio output driver is the one used for the Per
bootloader
- 自己写的bootloader，包含了内存和flash 的初始化，可以引导并启动linux内核。-My bootloader, includes the code to initialize the RAM and flash,can load the linux kernel and start it.
patch
- This a patch file for the cfe_bcm63xx source danitool. It gives support for 8mb flash chips and has other minor fixes too. It gives support for the livebox, alice pirelli and homehub routers!!! Realy good patch, and very hard to find.-This is a patch
camera
- 摄像头2440A开发板整板测试程序源码。 其它bin文件为不同尺寸屏对应的烧写镜像，如果经过NAND FLASH的uboot下载到内存中运行，程序可以全部正确运行。 如果通过JTAG或者是JLINK下载到NorFlash中运行，需要修改DS18B20.C中的#define DELAY 66为#define DELAY 1，其他的都正常。-Camera 2440A development board whole board test program source code.
tft
- 建议通过nand flash的uboot下载到内存中运行。 可以支持3.5寸、4.3寸、7寸液晶屏 需要修改TFT_Driver.h中的#define LCD_Type LCDW35 #define LCD_Type LCDW35 —>3.5寸屏 #define LCD_Type LCDW43 —>4.3寸屏 #define LCD_Type LCDA70 —>7.0寸屏-Suggestions to nand flash memory
iwleeprom.tar
- Atheros EEPROM tool for use with the custom ath9k driver which supports ROM by placing it in C char format in romimp.c You can also use this full 4k ROM when the card reacts again to flash it with ./iwleeprom -i eeprom_4k.rom
MB85RC64V
- MB85RC64了 FRAM（铁电随机存取记忆体）独立芯片配置了8192×8位，形成铁电工艺和硅栅CMOS工艺技术非易失性内存中的细胞。 MB85RC64采用两线串行接口（与世界标准的I2C总线兼容）。与SRAM不同的MB85RC64是无需使用数据备份电池，能够保留数据。 MB85RC64的读写次数10亿次，与EPROM和FLASH相比，有显著的改善。而且不在向写完存储器后，不需要查询序列。 -MB85RC64 out FRAM (ferroelectric random acce
Bootloader
- By replacing the stock loader with modified Redboot we can install OpenWrt permanently. Replacing the loader is tricky because you need to get a version tailored for your device (correct hw. revision and flash type) - see in the forum and below! Here