搜索资源列表
duojitongxin
- 利用51单片机实现串口多机通信的实验程序，分别有上位机和下位机的程序。-using MCS-51 microcontroller serial multi-machine communication experimental procedure, the respective PC and the next crew procedures.
USB
- 这是一个关于国外一些USB转串口的电路,对于没有串口的笔记本电脑而又想做单片机实验的朋友有福了,
可用的t9输入法
- t9 输入法. 可以方便地移值到单片机上使用. 可实验t9输入法.
CC2530-16
- CC2530单片机基础实验，主要功能是实现了串口时钟的PC显示。-CC2530 MCU-based experiments, the main function is to achieve a PC serial port clock display.
RS232
- RS232串口通信实验，实现计算机和单片机之间的通信-RS232 serial communication experiment, the realization of single-chip computer and communication between
usb_D12Test
- 在vc环境下基于DriverStdio的usb设备驱动程序实例，单片机实验板usb芯片采用的是PDIUSBD12。-Vc environment in the DriverStdio based device driver usb example, microcontroller chip usb board is PDIUSBD12.
aa
- 采用中断方式的程序编写方法 利用单片机串口，实现两个实验台之间的串行通信以及一个试验箱自发自收 -Interruption of the procedure used to prepare the way use of single-chip serial port, the achievement of the two test serial communication between the chamber and a spontaneous self-close
huanyangdeng
- 花样灯实验，把程序烧录到单片机中就可以实现花样的了，是隔一个跳转一次，两种不同颜色的灯之间跳转！-Synchronized lights experiments to burn into the microcontroller program can be achieved in a pattern, is a jump every other time, two different colors of light between the jump!
uart
- 通过出口实验，进一步熟悉了异步通讯，也对此单片机有了进一步的了解。-Through the export of experiments, more familiar with the asynchronous communication, but also have a better understanding of this microcontroller.
serial_control_led
- c51单片机编程。利用串口从电脑上向单片机发送数据，单片机接受并返回数据，同时控制单片机实验板上的LED灯。-c51 microcontroller programming. Using the serial port from a computer to send data to the microcontroller, microcontroller to accept and return data, SCM test panel LED lights.
Manyserialcommunicationtest
- 实验名称：多机串口通信测试 试验功能：通过单片机发送数据给PC机, 通过串口调试助手（设定为字符格式显示）显示发送的数据 -Experimental name: serial communication function: through the experiment test data sent to chip PC, through a serial port debug assistant (set) showed that character format for sending dat
CC2530-GSM-code
- 无线单片机CC2530的串口实验和连接GSM模块的实验代码，-some serial and gsm code about wireless mcu cc2530
ymhy
- 串口,用于计算机和单片机连接，发送信息。基本实验。-a program
PIC16F877_usart
- 实验五_PIC单片机与PC机的RS232串口通信_C,附程序流程图和proteus仿真图，利用串口助手调试通过。-Five _PIC experimental PC-MCU and RS232 serial communication _C, attached flowchart and proteus simulation chart of debugging through the serial port aide.
实验19：红外通信
- 红外通信，，，主要是51单片机系列的红外遥控器(Infrared remote control)
实验26 - 1.8吋TFT彩屏显示
- OLED显示(硬件SPI驱动）,使用串口驱动程序，很好是节约单片机输出口。(OLED display (hardware SPI driver), using serial driver, very good is to save the single chip to export.)
实验三：LED流水灯
- 用51单片机汇编语言实现LED流水灯的功能(Realize the function of LED water lamp)
使用外部24C02保存参数试验
- 使用AT24C02保存参数程序 1、程序说明： 该例程演示了使用外部AT24C02保存设置参数实验，通过按键设置一个 参数，然后把该参数保存到AT24C02中，下次开机就可以看到 上次保存的数据。 2、实验操作 程序下载到开发板运行后，可以看到数码管显示数值。 每次按下按键S12，该数值将加1， 每次按下按键S14，该数值将减1， 每次按下按键S13，将保存该数值， 给板子断电再重新上电，可以看
OLED显示实验
- OLED 显示试验 STM32单片机 MTD编译平台(OLED display test STM32 microcontroller MTD compiler platform)
15-综合实验五、节能路灯系统
- 能够实现智能路灯的感应以及调节，用stc12c5a60s2单片机实现功能(It can realize the induction and adjustment of the intelligent street lamp, and realize the function with STC12C5A60S2 single chip microcomputer.)