搜索资源列表
uart
- 开源的串口通信程序，用vhdl 编写的，已通过测试，在DE2的开发板上能够运行。
三星2410开发板的GPS检测程序
- 在三星2410开发板中，用C语言编写的GPS模块检测测试程序。
GPIOdriver
- 这是一个在android下进行gpio驱动开发的例子，在这个例子中分别从底层驱动代码到测试程序再到android上的JNI层，然后通过java代码调用APP Framework层的接口实现对开发板上led的控制-This is carried out under a gpio android-driven development example, in this case were driven from the bottom to the android code to the test pr
S3C2410GPRStosendandreceivetextmessagesExperiment.
- 利用S3C2410开发的GPRS收发短信模块程序，程序已经通过实验板测试，可以直接利用-S3C2410 development using GPRS to send and receive SMS module procedures, procedures have been tested by experiment board, you can directly use the
USBkey
- 用单片机做的USB开发板的键盘程序 开发板上共有8个按键，功能分别为： K1:左Ctrl键 K2:左Shift键 K3:左Alt键 K4:0键 K5:1键 K6:2键 K7:Caps Lock键 K8:Num Lock键 按键功能测试： 同时按下K1和K2可做输入法切换，这跟键盘上的两个键功能一样的。 K7可打开大写字母锁定，同时LED2亮起。K8是小数字键盘锁定键， 当数字键盘打开时，LED1亮起，这时可用K4，K5，K6输入数字。 请留意EDN板
RFIDread
- Msp430f2471驱动cc1100最新的Demo程序。硬件spi通讯，比软件模拟更容易，更简单明了。是学习RFID编程的经典无线通讯程序！在开发板上成功测试。-Msp430f2471 latest Demo-driven process cc1100. RFID is a learning process programming classic!
serial_and_usb
- 由电脑圈圈的原程序改写，使用串口3，波特率9600连接上EDNCHINa，电脑圈圈的USB开发板可以测试从串口发送到USB接收的数据，这是上位的程序，很有参考价值。下位机程序另发。-By a computer program to rewrite the original circle, use the serial port 3, connected to the 9600 baud rate EDNCHINa, the computer' s USB development board
mini2440_ts_4
- 开发板上测试小程序，帮助初学者入门，可以和我联系-Development of on-board testing small programs to help beginners get started, you can contact me
UTB1.02
- VC下USB接口开发程序，此程序是PC机USB接口的测试程序，连接下位机开发板，可测试三种方式下的USB接口速度！-VC USB interface development under the program, this program is the PC USB interface test program, connect the lower computer development board can be tested in three ways under the USB interf
FS2410_APP
- 优龙FS2410开发板（ARM920T核）非操作系统下的外围硬件测试程序，包括音频、LCD、LED、蜂鸣器、按键、串口、网口、USB等测试程序。-EURONAVY FS2410 Development Board (ARM920T core) non-peripheral hardware, operating system testing procedures, including audio, LCD, LED, buzzer, keypad, serial port, network po
gec-gps
- GEC2440开发板上的gpr测试程序，现可以采集到经度纬度，和格林时间-GEC2440 gpr development board
DevelopmentboardfirstversionofGSMdata
- GSM开发板第一版资料。。附带短信猫测试的小工具和TC35的工作原理和TC35（短信猫）发送接收程序例程-Development board first version of GSM data. . SMS cat tests with a small tool and the working principle and TC35 TC35 (SMS cat) sending and receiving routine
STM32_RTC_UART_OK
- 芯达开发板串口测试程序，希望对大家有帮助。-Core of the development board serial port test program, we want to help.
uart
- 基于mega16的串口通信的程序，在开发板上测试通过-Serial communication based mega16 procedures, the development board test. .
GPS
- 本代码基于AT91RM9200芯片的GPS驱动和测试程序。已经在开发板上成功通过测试。-The code is based on AT91RM9200 chip GPS drivers, and test procedures. Has been successfully tested in the development board.
RS232
- RS232发送与接收完整程序，经过本人在开发板测试-RS232 SEND AND RECEIVE
serial_3
- linux下USB转串口通讯程序，默认是打开ttyUSB0,可修改这个设备节。成功在开发板上测试，没有丢包。-Under the Linux USB serial communication program, the default is open ttyUSB0, can modify this equipment. Successful tests on the development board, there is no packet loss.
Tiny210.Uart.test
- 友善之臂Tiny210开发板，android系统下串口测试程序-Friendly arm Tiny210 development board, serial testing procedures
ceshi11
- FPGA开发板数码管按键测试程序 数码管跑数 独立按键控制数码管加一 开关控制数码管亮灭(FPGA development board digital tube key test program digital tube running number independent keystroke control digital tube add a switch to control the digital tube)