搜索资源列表
JN-AN-1016-Zigbee-Wireless-UART-1v4
- 该源代码为Jennic公司基于Zigbee协议栈的芯片JN5121开发出来的基于IEEE802.15.4和Zigbee的无线串口设备（下位机）的通信源代码！望跟大家分享！-the source code for the company Jennic Zigbee protocol stack based on the JN5121 chip developed Based on the IEEE802.15.4 and Zigbee wireless serial device (crew) o
CSharpcode-uart
- C#编程的串口通信程序，实现串口通信的协议。-C# programming serial communication program, serial communication protocol.
Demo2_UART
- SPCP825的UART控制程序，标准全双工串行异步通讯端口（适用于RS-232协议），波特率可达到2457600bps@12MHz@12MHz、1536000bps @6MHz； -SPCP825 the UART control procedures, standard full-duplex asynchronous serial communication port (for RS-232 protocol), the baud rate can be achieved 2457600b
uart
- uart协议、实现、验证，基于wishbone协议，工业标准为16550A-UART protocol, implementation, verification, based on the Wishbone protocol, the industry standard for the 16550A
rxd
- VHDL语言写的UART通信接收端程序，适用于RS232协议-VHDL language the receiving end of the UART communication procedures, applicable to RS232 protocol
vag_ploland_for_audi_and_vw
- program for vag moble audi and vw
Run_time_calibration_of_the_internal_RC_oscillator
- 如何通过UART来校准内部RC振荡器。这种方法是基于LIN协议上使用的方法。-Run-time calibration of the internal RC oscillator (19 pages, revision A, updated 09/04) This application note describes how to calibrate the internal RC oscillator via the UART. The method used is based on t
UartTest
- UART测试代码，可以与实现下位机与上位机之间的RS232协议的UART通信测试-UART test code, can achieve the lower computer and the host computer RS232 protocol between the UART communications test
MTK
- 文档内容： －》MTK软件架构 －》如何编译 －》开发目录结构解析 －》开发工具的了解 －》程序入口，程序导读 －》MMI的制作 -- OS: Nucleus OS. - L1 Protocol Stack: GSM physical layer. - Drivers: device driver, like SIM, UART, GPIO, etc. - L2/L3 protocol stack: GSM protocol st
UART
- 串口是计算机上一种非常通用设备通信的协议（不要与通用串行总线Universal Serial Bus或者USB混淆）.其中包含了arm和51版本的串口程序，但是也不好公开，就公开一个51版本的吧，都差不多，很容易移植的-Computer serial port is a very common device communication protocol (not with the Universal Serial Bus Universal Serial Bus or USB confusion
1234pppccode
- This the first release of PPP for Nucleus Net. This release includes support for the PAP and CHAP-MD5 authentication protocols and the internet protocol control protocol (IPCP). The following files are the generic portion of PPP (non-harwa
Xmodem
- 用 UART 做文件传输（采用 Xmodem协议）-UART to do with the file transfer (using the Xmodem protocol)
java-com
- 自己写的简单上位机软件， 实现对com1口的监听， uart， 界面不是很完善， 提醒要自己写的同学们： 界面中输入的是字符串， 要输出到串口， 必须转化成16进制， 否则底层的协议是不会通过的。-Write your own simple PC software to realize the com1 port monitor, uart, the interface is not perfect, remind students to write their
__Usb-to-uart-protocol-converter-with-Attiny2313.
- Usb to uart protocol converter with Attiny2313 for avr tiny microcontroller attinny 2313.
XModem
- 这是UART上文件传输协议xmodem源代码，可移植性好。-This is the UART on the File Transfer Protocol xmodem source code portability.
UART V36
- TZN4 communication protocol on Arduino
UART driver on C51
- UART serial protocol to communicate with asynchronous connection
uart_codes
- Protocol Implementation
Demo_CR95HF
- 在工作中曾完成的一个NFC读卡器， 主要使用的ST公司的新推出的CR95HF芯片，做板测试已OK。 对于从事NFC开发的人员绝对是一种值得备用的资料。 （附件提供原理图，CR95HF编程手册，驱动CR95HF的C源代码，另包含有 对双接口芯片M24LR64的驱动） CR95HF芯片有如下特点： 标准频率：13.56-MHz 支持多协议：ISO/IEC 14443 A and B，ISO/IEC 15693，ISO/IEC 18092 提供2种标准接口： SPI 和 UART