搜索资源列表
fa
- PLD串口实验通信程序,可以实现实验板和PC机之间的数据传送,并显示在LED上-PLD serial communications experimental procedure can be achieved experimental board and the PC data transmission, and the LED display on
8255控制循环LED显示
- 一个采用8255芯片控制8个LED灯循环点亮的程序代码-a 8255 chip used to control eight LED lights lit circle code
LED
- 在S3C6410平台下的Android系统中开发的一个led的测试程序-In the S3C6410 platform for Android system, led the development of a test procedure
dccomms
- ComPort Library是一套用来编写串口通讯程序的控件。它包含5个控件：TComPort, TComDataPacket, TComComboBox, TComRadioGroup and TComLed。利用这些工具（当然还有DELPHI开发环境），你能更快更简单地开发串口通讯程序。包含Delphi上下文相关的帮助文件和源代码（4000行）。功能无限制。源代码：包含。适用语言：CB3 CB4 CB5 D3 D4 D5-ComPort Library is a set of proced
HostLEDcontrolprocedures
- 上位机控制LED程序，在KEIL中运行，适用于CYUSB的开发和仿真-Host LED control procedures, in KEIL run for the development and simulation CYUSB
KEY_LED
- 这是三星手机的键盘和里面LED程序程序源代码，值得学习哦-This is a Samsung mobile phone keyboard and inside the LED program source code, it is worth learning oh
vb.net-LED
- 用VB.NET写的通过串口发送汉字到LED屏的程序-Using VB.NET to write Chinese characters through the serial port to program LED screen
VB-control-dimmer-or-LED-adjust
- VB串口控制可控硅程序,控制界面。-VB,MScom control adjust or dimmer system ,conrol panel.
led
- 这是一个读取access数据库内容显示到LED电子屏的小程序，LED屏使用永泰通信屏，使用串口编程-This is a read access database content display LED electronic screen applet LED screen using the the Yongtai communication screen, use serial programming
led
- led控制卡二次开发包源代码,有示例程序 C#版本-led control card secondary development of the package source code, sample program C# version
led
- 8051单片机正常的运行LED 闪烁程序，验证是基于ADUC812单片机调试能正常运行-the 8051 mcu code about LED falsh
LED
- mini2440上WindowsCE的LED灯驱动测试程序-LED lights on the mini2440 WindowsCE driver testing procedures
matrix-LED
- 点阵LED显示屏节目更新程序,能直接将汉字的模通过串口向单片机控制的点阵LED传送，并能实现左移、右移、静态显示、时间更新等基本控制命令。-LED dot matrix display program updates can be molded directly to the characters sent by the serial dot matrix LED to the MCU control, and can achieve left, right, static display, t
lab1-GPIO_output_LED
- LED程序，28335DSP应用，初学必要-LED program，28335DSP
OK6410-LED
- 一个简单的嵌入式的编程程序，通过51板，使led灯能够循环的输闪动-A simple embedded programming procedures, through 51 plate so that the output of led lights flashing can cycle
PWM测试程序
- stc12c5a 测试 pwm 使用led测试高低电平(The stc12c5a test PWM uses the LED test high-low level)
21ic下载_基于STM32的CAN总线收发程序
- 实现can通信，经本人验证完全可以使用，拿去吧。(#include "can.h" #include "led.h" #include "delay.h" #include "usart.h" #include "led.h" #include "delay.h" #include "key.h" #include "sys.h&qu
地感LED灯程序485总线
- 地感七彩灯485双向控制。单片机485通信，RGB灯控制。(485 way bidirectional control of ground feeling colorful lamp.)
led
- 点亮LED程序 用于PCB板测试，检查PCB板健康状态(The LED program is used to test the PCB board and check the health status of the PCB board)
基于LED可见光音频通信系统程序
- 可见光通信的音频传输系统，该系统通过基于STM32单片机的LED可见光通信系统硬件电路板，通过调试发送端LED灯与接收端之间的距离，来验证LED可见光通信。系统由两大部分组成：发射模块和接收模块。在发送模块的末端，由有源扬声器等输出设备通过音频线将信号发送到发送模块，再由LED灯进行发送；在接收模块，LED灯将接收的光信号转换为电信号，再经一系列放大处理电路和滤波电路，使扬声器能够播放清晰的音乐。测试结果表明，系统实现了可见光音频通信的功能，具有很好的实用性。