搜索资源列表
PhaseNoise_sim
- PLL相位噪声仿真方法总结,用来说明对各个模块相位噪声仿真的方法-PLL phase noise simulation document
DSSS
- 设计一个有干扰的直接序列扩频通信系统， PN码由m序列产生器产生，经过高斯白噪声信道。在接收端接收到的信号包括“有用信号+高斯白噪声+干扰”，将接收信号进行解扩，判决，得到用户的信号检测结果，绘制不同的扩频增益（增益值为10，30，50）下，误比特率随信噪比Eb/N0的变化曲线。-Design of a direct sequence spread spectrum interference system, PN code generated by the m sequence generato
78225289LDPC
- 应用C语言对ldpc进行仿真，包含信噪比以及误码率的产生-Application of C language ldpc simulation, including the generation of signal to noise ratio and bit error rate
program
- Implement a Rayleigh fading channel simulator based on the Filtered Gaussian Noise method -Implement a Rayleigh fading channel simulator based on the Filtered Gaussian Noise method
wirelesscomm
- In this project we analyze and design the minimum mean-square error (MMSE) multiuser receiver for uniformly quantized synchronous code division multiple access (CDMA) signals in additive white Gaussian noise (AWGN) channels.This project is mainly bas
GPSNaviDataGen_4ch
- 基于verilog语言的ＧＰＳ模拟源代码，代码为４颗星，包含噪声信号。-GPS-based Analog Verilog language source code, code for the four stars, including the noise signal.
GSM-LownoiseAmplifierModule-to-Monitor-the-process
- GSM低噪声放大器模块监控处理程序，主功能包括输入输出功率检测，最大输出功率控制，器件坏告警等。-GSM low-noise amplifier module to monitor the process, the main features include detection of input and output power, maximum output power control, alarm devices, such as bad.
demod
- This program simulates the transmission performance of BPSK under Additive White Gausian Noise (AWGN) environment.
ofdmci
- Simulation program to realize OFDM transmission system Simulate effect of interfarence noise
WienerNoiseReduction
- matlab implementation of noise reduction using Wiener filter
fastICA_noisy
- 噪声环境下的FastICA算法 有完整的源信号和分离信号演示-Noise environment FastICA algorithm has a complete separation of the source signal and the signal presentation
This_one
- Cooperative communication_power control a) Generate random binary sequence of +1’s and -1’s. (b) Given different Power to the source and the relay as well (c) Multiply the symbols with the channel and then add white Gaussian noise. (d) At
pracsim1
- 通信基本仿真,适合初学者学习的代码,包括了调制,分析等等:使用IIR filter的经典模拟滤波器（巴特沃斯Butterworth,切比雪夫Chebyshev）,Bartlett周期图谱，加窗Bartlett周期图谱，基带波形仿真，IIR的贝塞尔滤波器Bessel Filter，二进制对称信道Binary Symmetric Channel仿真，比特序列，Remez滤波，BPSK复合基带信号仿真，载波生成器，椭圆滤波器Elliptical Filter，FFT,FSK调制及解调，高斯噪声Gaus
pracsim-2
- 通信基本仿真2适合初学者学习的代码,包括了调制,分析等等:使用IIR filter的经典模拟滤波器（巴特沃斯Butterworth,切比雪夫Chebyshev）,Bartlett周期图谱，加窗Bartlett周期图谱，基带波形仿真，IIR的贝塞尔滤波器Bessel Filter，二进制对称信道Binary Symmetric Channel仿真，比特序列，Remez滤波，BPSK复合基带信号仿真，载波生成器，椭圆滤波器Elliptical Filter，FFT,FSK调制及解调，高斯噪声Gaus
pracsim-3
- 通信基本仿真3,适合初学者学习的代码,包括了调制,分析等等:使用IIR filter的经典模拟滤波器（巴特沃斯Butterworth,切比雪夫Chebyshev）,Bartlett周期图谱，加窗Bartlett周期图谱，基带波形仿真，IIR的贝塞尔滤波器Bessel Filter，二进制对称信道Binary Symmetric Channel仿真，比特序列，Remez滤波，BPSK复合基带信号仿真，载波生成器，椭圆滤波器Elliptical Filter，FFT,FSK调制及解调，高斯噪声Gau
ofdm_EM_channel
- 分析了相位噪声对正交频分复用(OFDM)系统的影响,发现相位噪声不仅产生 通用相角错误(CPE),而且还会产生载波间干扰(ICI),这都使OFDM系统的性能急剧恶 化,因此必须对CPE和ICI进行校正.文中给出了基于MSE准则的CPE校正方法,考虑到 ICI干扰主要来源于相邻信道,进而提出了基于LMS法则的自适应相邻信道干扰消除方 法.整个算法简单高效.仿真结果表明,所提出的算法大大改善了OFDM系统的性能-Analysis of phase noise on the ortho
JDCHE_and_JDPP_for_TD_SCDMA
- TD-SCDMA系统联合检测中的信道估计、信道估计后处理、信道估计串行干扰消除后处理算法的源代码。其中，信道估计采用频域快速FFT法以减少运算量；后处理采用激活窗检测法，只保留激活用户的多径信息，其余置0，以达到降低干扰及噪声的目的；串行干扰消除可以消除多小区信道估计的干扰，以得到本小区的纯净信道估计结果。-TD-SCDMA system, joint detection of channel estimation, channel estimation and post-processing,
cdma_mmse
- DS-CDMA的MMSE算法程序，给出了不同信噪比下的BER性能比仿真曲线。-DS-CDMA of the MMSE algorithm program are given under different signal to noise ratio curve of BER performance than emulation.
try_fxlms
- Implementation of FxLMS algorithm for a single channel feed-forward active noise control system.
estimation-of-channel-noise
- channel noise estimation for different modulators DQPSK, QAM in simulink