搜索资源列表
-
3下载：
程序代码说明
P0301：数字图像矩阵数据的显示及其傅立叶变换
P0302：二维离散余弦变换的图像压缩
P0303：采用灰度变换的方法增强图像的对比度
P0304：直方图均匀化
P0305：模拟图像受高斯白噪声和椒盐噪声的影响
P0306：采用二维中值滤波函数medfilt2对受椒盐噪声干扰的图像滤波
P0307：采用MATLAB中的函数filter2对受噪声干扰的图像进行均值滤波
P0308：图像的自适应魏纳滤波
-
-
3下载：
This a software runing on the matlab, it is used in the channel coding simulation.
It include DVB-S2 LDPC, Covolution turbo, and block turbo code, You can choose which channel coding to run.
it run the encoder and add white noise in the channel,
-
-
3下载：
一、 本程序采用16QAM调制方式，对一串2进制信源进行调制，采用（7，4）循环码对信源做信道编码，用升余弦滚降函数进行基带调制，再调到高频信道；在信道上加入高斯白噪声，运用匹配滤波器解调，画出解调星座图，运用最小欧氏距离译码判决，再对信号进行信道解码，画出采用信道编码技术和不采用信道编码技术的误比特率图。-First, this program uses 16QAM modulation mode, for a string of two binary source is modulated,
-
-
0下载：
In this project we analyze and design the minimum mean-square error (MMSE) multiuser receiver for uniformly quantized synchronous code division multiple access (CDMA) signals in additive white Gaussian noise (AWGN) channels.This project is mainly bas
-
-
1下载：
QPSK系统在无线通信信道中的仿真,通过对有若干条（大于2条）路径的无线多径衰落信道中的QPSK系统进行误码率性能仿真，并在与理想的高斯加性白噪声信道中同样系统的BER性能进行比较，利用SA方法给出本仿真模型的仿真结果-QPSK system in the wireless communications channel simulation, through a number of articles (more than 2) the path of wireless multi-path fa
-
-
1下载：
用MATLAB编写程序实现BPSK的调制与解调过程，并且为了模拟数字通信系统过程，在调制后加入高斯白噪声。-MATLAB program used to prepare the BPSK modulation and demodulation process, and in order to simulate the process of digital communication system, in the modulated Gaussian white noise after.
-
-
1下载：
一、 本程序采用16QAM调制方式，对一串2进制信源进行调制，用升余弦滚降函数进行基带调制，再调到高频信道；在信道上加入高斯白噪声，运用匹配滤波器解调，画出解调星座图，运用最小欧氏距离译码判决，计算误比特率。-First, this program uses 16QAM modulation mode, for a string of two binary source is modulated with a raised cosine roll-off function for base-ba
-
-
0下载：
Cooperative communication_power control
a) Generate random binary sequence of +1’s and -1’s.
(b) Given different Power to the source and the relay as well
(c) Multiply the symbols with the channel and then add white Gaussian noise.
(d) At
-
-
0下载：
在matlab环境下，高斯白噪声信道下接收端对发送信号的恢复效果的验证-In the matlab environment, Gaussian white noise channel receiver for sending signals to resume the verification results
-
-
0下载：
在matlab环境下，高斯白噪声信道下原信号的误码率特性的仿真代码-In the matlab environment, Gaussian white noise channel bit error rate characteristics of the original signal simulation code for
-
-
2下载：
QPSK+Rayleigh(AWGN)仿真MATLAB程序，在信道中加入高斯白噪声，并带有仿真报告-QPSK+ Rayleigh (AWGN) MATLAB simulation program by adding Gaussian white noise in the channel, and with a simulation report
-
-
0下载：
本次实验主要是对一个正弦信号加入高斯白噪声，然后通过傅里叶变换对正弦信号进行谱估计。最后要用matlab进行仿真，得到正弦函数的时域和频域波形，关键找出信噪比和正弦信号频谱的均方误差之间的关系。-The experiment is a sinusoidal signal which is to white Gaussian noise, then by Fourier transform of the sinusoidal signal spectrum estimation. Finally,
-
-
0下载：
为评估TD_SCDMA下行链路联合检测接收机的性能，使用MATLAB软件进行链路仿真，本程序主要是实现用户QPSK基带调制、扩频、加扰、形成时隙、形成子帧、以及进行脉冲形成滤波，通过加性高斯白噪声信道和瑞利衰落多径信道，信道估计、联合检测等几个主要过程，整个仿真都是在基带进行的。-Link simulation to assess the performance of the TD_SCDMA Downlink joint detection receiver using MATLAB soft
-
-
0下载：
这是在MATLAB环境下实现高斯白噪声波形的程序-This is a white Gaussian noise waveform in the MATLAB environment to achieve program
-
-
0下载：
一些基本的调制解调程序，自己最近收集的。m文件的形式，可以直接拿来用(bpsk qpsk mqam in Additive White Gaussian Noise)
-
-
0下载：
The digital simulation system using MATLAB to illustrate the
Quadrature Amplitude Modulation (QAM). QAM is a modulation scheme to convey two digital bit
streams which can be converted to symbol signals by modulating the amplitudes and the phase of
-
-
1下载：
利用matlab软件设计并仿真下面的无线通信系统。模拟信源为单音频信号。模拟调制方式为ASK。信道为多径信道（仿真中2径），信道中噪声为加性高斯白噪声。采用相干解调接收。画出了解调器输出端性能曲线与点信噪比SNR的关系。(Matlab software is used to design and simulate the following wireless communication systems. The analog source is a single tone signal. The
-
-
0下载：
实现matlab下2ASK通过高斯白信道采用相干解调 的符号信噪比/误符号率/误比特率计算 。以及调制后波形的显示，包括2FSK仿真误码率','2FSK理论误码率图形。(Calculation of symbol signal-to-noise ratio / symbol error rate / bit error rate of 2ASK through coherent demodulation in white channel under matlab. And modulation
-
-
1下载：
建立了直接序列扩频系统的matlab仿真模型，在信道中存在高斯白噪声和干扰的情况下，对系统的在不同扩频增益下的误码率性能进行了仿真及分析，分析了扩频码的自相关性、误码率、性噪比。(A matlab simulation model of the direct sequence spread spectrum system, the existence of Gauss white noise and interference in the channel under the condition
-
-
1下载：
利用MATLAB软件对OFDM系统做出仿真。仿真中采用QPSK调制技术，并加入高斯白噪声，最终得到QPSK星座映射图以及BER曲线图。由仿真结果可以看出，OFDM在高斯信道具有良好的抗噪声性能，误码率较低。(MATLAB software is used to simulate the OFDM system. In the simulation, QPSK modulation technology is used, and Gauss white noise is added, and th
-
