搜索资源列表
fa
- PLD串口实验通信程序,可以实现实验板和PC机之间的数据传送,并显示在LED上-PLD serial communications experimental procedure can be achieved experimental board and the PC data transmission, and the LED display on
8255控制循环LED显示
- 一个采用8255芯片控制8个LED灯循环点亮的程序代码-a 8255 chip used to control eight LED lights lit circle code
C51soft
- 使用C语言实现的用串行方式驱动led显示、EEPROM存贮器操作、按键扫描、红外接收等-use of the C language Serial Port Driver led, EEPROM memory operation, scan buttons, infrared receiver, etc.
16LED
- led条屏幕显示,串口屏幕,带时间显示功能~~!-led of the screen display, serial screen, with time display function ~ ~!
8×8dotmatrix
- 利用595实现串口数据传输，控制led点阵8×8的显示- Using 595 realizations strings mouth data transmission, controls the led lattice 8脳8 demonstration
ICReader_LED
- 对带LED显示的非接触IC卡读写器的控制，寻卡、读取卡片的物理序列号、核对密钥、读卡、写卡，通过LED数码管显示卡号等信息。
001
- 串口通迅。能够完成下位机对上位机发出的1-9的信号做出响应，LED可以亮，数码管显示相应数字
trt
- 串口通信 接收GPRS信号 显示在显示LED上 LED显示屏 还没解决
freescale_SPI
- freescale的SPI通信程序, 其中端口PORTM用作SPI的第二功能，发送的数据若能接收则在端口B的LED灯上显示-freescale the SPI communication program, including work as an SPI port PORTM second feature, send the data received in the port B if the LED lights on the display
INTERRUPT
- 利用了KEIL环境μVision2，使用了C语言编程，与串口通信，LED灯显示闪烁-KEIL environment used μVision2, the use of C language programming, and serial communications, LED light display flashes
jz
- 甲乙两台80C51单片机串行通信，一台通过开关控制P1口的高低电平并发送数据，另一台接收发送过来的数据，通过P1口用发光二极管显示，高电平点亮，低电平熄灭。-A and B two 80C51 microcontroller serial communication, a switch control through the high-low P1 port and send the data to send over another to receive the data, through t
LedMarquee
- LED 模拟显示 LedMarquee LED 模拟显示-LedMarquee LED
MeasurVoltageUserManual
- 直流电压单通道/双通道测量可选；自由设定两个测量通道的基准上下限；判断结果可以通过LED显示；测量结果通过RS232输出；宽工作电源：+4.0V---16VDC； -DC voltage single/dual-channel measurement options free to set benchmarks for measuring channel two upper and lower limits results can be judged through LED displa
spi
- 基于ATmega128的SPI串口通信，以LED显示-Based on ATmega128' s SPI serial communication to LED display
LedDisp_c
- 通过I/O模拟同步串口与74HC595进行连接，控制74HC595驱动LED显示。-Through the I/O analog synchronous serial port to connect with 74HC595, 74HC595 drive LED control display.
chuankou
- 单片机串口控制，实现单片机和PC机的通信过程，单片机发送数字给PC机 ，PC机接受数据，并且显示在用VB所做的界面上。-SCM LED water lamp
jlchengxu
- 7219级联显示16个数码管的驱动程序，与单片机通过串口通信。简单实用。-7219 Cascade 16 LED display drivers, and the microcontroller through the serial port communication. Simple and practical.
led
- 这是一个读取access数据库内容显示到LED电子屏的小程序，LED屏使用永泰通信屏，使用串口编程-This is a read access database content display LED electronic screen applet LED screen using the the Yongtai communication screen, use serial programming
matrix-LED
- 点阵LED显示屏节目更新程序,能直接将汉字的模通过串口向单片机控制的点阵LED传送，并能实现左移、右移、静态显示、时间更新等基本控制命令。-LED dot matrix display program updates can be molded directly to the characters sent by the serial dot matrix LED to the MCU control, and can achieve left, right, static display, t
LedDisplaysource
- 这个是当时给医院调试的LED显示程序，可指定字体大小位置，完整源代码-This is the time to hospital debug LED display program, you can specify the font size and position, the complete source code