搜索资源列表
串口通讯硬件仿真测试
- 232串口测试程序。// 软件模拟测试说明: // 1.这个测试采用查询方式进行串口通讯 // 2.将软件仿真环境的晶震设为11.0592 MHz // 3.软件模拟全速运行, 观察波特率是1200bps // 4.在串口1中输入数字或字母,可观察到通讯是否有误。-232 serial testing procedures. / / Software simulation tests : / / 1. The test inquiries conducted using seri
串口通讯(演示验证)
- AVR单片机ATmega128的串口通讯程序，根据输入的数据，点亮不同的指示灯，可以验证串口通讯的正确性。-AVR ATmega128 serial communications procedures, data entry, lit the lights come on, can verify the correctness of serial communications.
Can
- Can通讯数据类模块,我经常用在自己的工程当中
PIC18-Program
- Chart-04-----端口应用 Chart-05-----中断优先级处理 Chart-06-----SPI/IIC应用 Chart-07-----串口通讯应用 Chart-08-----端口RB应用 Chart-09-----TMR0/TMR1应用 Chart-10-----AD转换 Chart-11-----CCP1/PWM Chart-12-----CAN通讯 Chart-13-----液晶显示 Chart-14-----WDT/SLEEP/EEP
vb串口通讯
- 这个文件是有关系统串口通信的实例，作为学习串口通信入门来说是一个很好的参考实例，它是基于vb语言的，而且其中很多代码可以直接移植 -this paper is on the serial communication system examples, as a learning portal Serial Communication is a very good reference example, it is based on vb language, but many of them can
串行接口通讯实验代码
- 串行接口通讯试验该试验可以学习如何编写一个通讯程序。这个试验能够实现的功能很简单，仅仅作为试验用。工作环境为：无需其余任何环境，直接接通电源即可。-serial communication interface test of the pilot can learn how to prepare a communication process. The pilot function can be achieved is very simple, just to experiment with. T
SerialPort.rar
- 在Visual c++下的串口通信程序，可以边学边用呀,In the Visual c++ Under the serial communication program, you can learn while using it
rs232-com
- rs232串口通讯测试程序，可以通过此程序连接到com端口。接受/发送数据。-rs232 serial communications test program, this program can connect to the com port. Receiving/sending data.
Can
- pic18f2480与ad7731之间的can 通讯程序-the pic18f2480 ad7731 between can communication procedures
USB-CAN
- USB-CAN的VC接口程序。与ARM进行通讯，很详细。-The VC USB-CAN interface program. Communicate with the ARM, very detailed.
Can_Test
- Can通讯的源码，Defines the special registers and firmware programs for lpc22xx\lpc212x\lpc211x\lpc210x-Can the source of communication, Defines the special registers and firmware programs for lpc22xxlpc212xlpc211xlpc210x
dsp2812_CAN
- 刚调通的2812CAN总线通讯，设置波特率为250kps，为标准CAN的发送模式-Just tune tung 2812CAN bus communication, set the baud rate of 250kps, a standard CAN-send mode
Fx2n
- 三菱FX PLC 通讯程序，在网络上看到一个，发现很多code丢失，自己重新整理写了一个，简单试验一下还可以-Mitsubishi FX PLC communication program in the network see one, find a lot of code missing, re-organize themselves to write a simple test what can be
VCprogram
- VC 通讯程序 用于串口通讯 稍加改动就可以用于工程项目-VC communication program for the serial communication can be used for slight changes in the project
Peli-CAN
- CAN通讯原程序，能够进行CAN收发通信，对通用IO口数据采集，通过CAN传输。-CAN communication of the original program, CAN transceiver capable of communication, data collection on general-purpose IO ports, through the CAN transmission.
C8051F02X系列MCU串口通讯底层驱动程序
- C8051F02X系列MCU串口通讯底层驱动程序，已经调试通过，大家只需要编写上层代码即可!-C8051F02X series MCU serial communication underlying drivers, debugging has been passed, we only need to write the upper code can be!
can-ziliao
- 主要包含CAN控制器的控制以及利用开发软件对CAN通讯的采集-Main collection contains the CAN controller' s control, and the use and development of software for CAN communication
CAN
- can通讯，采用can的回环模式，开发环境是keil，程序采用独立按键控制。-can communicate using the loopback mode can the development environment is keil, the program uses independent control buttons.
CAN通讯协议初稿
- 通讯的物理介质为双绞线，通讯波特率为250kbps，采用CAN2.0B支持扩展帧，intel格式，TCU无需自带120欧姆终端电阻，通讯网络基于SAEJ1939协议。(The physical medium of communication is twisted pair, the communication baud rate is 250kbps, CAN2.0B supports extended frame, Intel format, TCU does not need 120 ohm
ISO11898-1_2_3_4_5_ag
- ISO11898是一个标准的CAN通讯协议，可以用于can通讯底层开发。(ISO11898 is a standard CAN communication protocol that can be used for the underlying development of can communications.)