搜索资源列表
avr-PC-USB(D12)
- 这是一个pc与avr通过D12进行USB通讯的简单实例，功能就是控制PORTC口.-This is a pc with avr through D12 USB communications simple example, PORTC function is to control the population.
bulkusb
- usb bulk 传输例程。 * The bulkusb driver is a generic function driver, based on the Windows Driver Model (WDM). * Supports Plug and Play(PnP), Power Management(PM), Windows Management Instrumentation (WMI) and the Selective Suspend (SS) features.
PC端软件
- 关于USB便携多道系统，PC端客户软件。调用硬件前，须安装好设备驱动程序，使Windows找到USB便携多道设备，否则可以使用其中的软件模拟功能。-on USB portable multi-channel system, the client PC software. Call hardware, it should install a device driver, Windows find USB portable multi-channel equipment, which can use
isp1301.rar
- usb on the go之isp1301芯片说明文档 主要包含了isp1301 概述 整体特性介绍 应用 电路图 引脚图 功能详细描述 工作模式介绍 USB的发送与接受 内部寄存器介绍 时钟唤醒机制 I2C总线控制 静态特性 动态特性 等等.,usb on the go the isp1301 chip documentation isp1301 contains an overview of the main characteristics of the overall plan to i
BUSHound.rar
- 这是一款非常好的USB调试工具，最主要是它解决了现在使用HID协议的设备调试，除了BUS Hound.exe支持USB HID设备调试，目前还没有其他软件能做到这个功能 ,This is a very good USB debugging tools, the most important is that it solved now using HID protocol debugging equipment, in addition to BUS Hound.exe support for U
CH376_test
- 该设计主要是通过STM32F10实现一个USB host的功能，USB host部分采用CH376S芯片来实现。本程序能够实现连接U盘读写操作的功能。-The design is mainly through STM32F10 a USB host function, the USB host part to adopt CH376S chip. This procedure can achieve the function of connecting U disk read and write
42pcb
- 该工程是一个FPGA的开发板 主要包括了FPGA芯片:EP3C25Q240C8 FPGA的配置芯片采用：EPCS16 USB芯片：CY7C68013A USB的FLASH采用：24LC64 AD芯片：AD9238 电源部分：LMS1117-3.3两块分别对USB、模拟部分和FPGA供电；LMS1117-1.2为FPGA核心电压；LMS1117-2.5为 IO口及PLL供电 9盏LED，4个开关 主要完成的一个功能是高速模拟信号的采集，以及上位机传输
communication-program-of-usb-hid
- 介绍较为详细的针对USB HID设备PC端软件开发的文档，基本可以直接按照文章步骤实现功能-Introduce a more detailed document developed for the PC-side software of the USB HID device, the basic According to the article step function
showbmp
- 功能为：怎样将从摄像USB发来的像素数据转换为BMP文件-Function is: how will be sent USB camera pixel data into a BMP file
USBkey
- 用单片机做的USB开发板的键盘程序 开发板上共有8个按键，功能分别为： K1:左Ctrl键 K2:左Shift键 K3:左Alt键 K4:0键 K5:1键 K6:2键 K7:Caps Lock键 K8:Num Lock键 按键功能测试： 同时按下K1和K2可做输入法切换，这跟键盘上的两个键功能一样的。 K7可打开大写字母锁定，同时LED2亮起。K8是小数字键盘锁定键， 当数字键盘打开时，LED1亮起，这时可用K4，K5，K6输入数字。 请留意EDN板
MyUsbDevice
- 用52+PDIUSB芯片，写的USB固件，可以参考这个编程思想，代码完全公开，可用Keil编译-This code would be a good sample for USB firmware programing ，and open source code without any lib function.
libusb-win32-device-bin-0.1.12.2.tar
- libusb on windows. Provide a ease of use interface for developing client-usb software in windows platform without using windows device and kernel function.
VC_USB
- 详细介绍V i s u a l C + + 6 ． 0 环境下利用Wi n d o w s A P I 函数来实现与符合mD设备类的U S B接口通信 。 -Details V isual C++ 6. 0 environment using Wi ndows API function to achieve and meet the mD device class USB interface communication.
Usb_Microphone
- 基于usb1.1协议的usb麦克风，实现了通过usb音频类设备的麦克风功能，能通过usb接口达到普通麦克风的性能。-Agreement on usb1.1 usb microphone, usb audio class to achieve device through a microphone function, through the usb interface to achieve the general performance of the microphone.
I-am-USB
- 以风趣易懂的口气叙述Linux下的USB功能，值得一看-To understand the tone of witty narrative USB function under Linux, worth a visit
can
- 学号输入系统，利用CAN总线的通信方式来获得数据并进行采集和保存等一系列功能。-Student id input system Use of CAN bus way of communications and to obtain data collection and preservation and so on a series of function.
5-USB-to-ATAPI
- Cypress has two USB 2.0 High Speed Mass Storage solutions. The ISD-300 is a fixed function Mass Storage solution for ATA devices. The EZ-USB FX2 is a flexible bridge solution that enables additional features to be added to a USB 2.0 bridge de
USB
- 此例程是基于FPGA的USB控制器实例，主要功能为通过FPGA芯片控制USB芯片，实现开发板和PC机之间的USB接口数据通信，来模拟一个硬件加密设备的功能。用Verilog语言实现。-This routine is an instance of the USB controller based on FPGA, the main function is to control USB chip by the FPGA chip, implement the USB interface for da
HT82K629A
- Windows 2000 USB+PS/2 Keyboard Encoder-The HT82K629A can function both in USB and PS2 interface environment. For PS2 interface, it supports IBM PC/AT, IBM PS/2 and all compatible machines and provides a 16-character first-in-first-out buffer in
5-VCP_EX
- 使用FT_GetComPortNumber函数调用来确定COM端口分配给一个设备,然后如何打开它。- use the FT_GetComPortNumber function call to determine the COM port assigned to a device and then how to open it.