搜索资源列表
EBDSAM7S64-Interrupt-ADS
- 本程序为完成各种中断的演示.at91sam7s64芯片,ads1.2编译器.代码说明： 1)完成基本的初始化 2)初始化PIO,IRQ,FIQ,software_interrupt等 3)驱动板上的四个按键(PB1,PB2,PB3,PB4) 4)初始化DEBUG口，Usart1等 5)初始化定时器timer0,timer1等-procedures for the completion of the various demonstration interrupted.
fet440_uart11_38400
- MSP430F449 子程序,MSP-FET430P440 Demo - USART1 UART 38400 Echo ISR, DCO SMCLK.-MSP430F449 subroutine, MSP-FET430P440 Demo-USART1 UART 38400 Echo IS R, the making of SMCLK.
fet140_spi1_04
- MSP-FET430P140 Demo - USART1, SPI Full-Duplex 3-Wire Master P1.x Exchange-MSP-FET430P140 Demo-USART1. SPI Full-Duplex 3-Wire Master P1.x Exchange
fet440_uart11_38400
- Echo a received character, RX ISR used. Normal mode is LPM0. // USART1 RX interrupt triggers TX Echo. // Baud rate divider with 1048576hz = 1048576/38400 = ~27.31 (01Bh|03h) // ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = default DCO = 32 x ACLK = 10
SI5338 Clock Synthersis
- Use ATMEAGA128A and USART1 output 5M~350M LVPECL Clock signal. RS232 parameter:9600,N,8,1 command: SET,CLOCK,FREQ,5.0;
STM32_USART1
- stm32 库文件：3.10 本程序是使用UART1接收中断,收到数据后直接把原数据从USART1发回去 一开机时,会发送 "Starting....."到USART1-stm32 Library: 3.10 This procedure is to use UART1 receive interrupt, received data directly to the original data sent back from USART1 A start,
usart1
- AMR_stm32f103的串口程序，利用中断方式进行接收。希望对大家有用。-AMR_stm32f103 serial programs, using the interrupt mode to receive. Want to be useful to everyone.
STM32-USART-DEMO-V2
- 演示 USART1 当接收缓冲器满时，将接收到的数据传送出去 V6-LED1闪烁表示正在收发数据。 -When the receiver buffer demonstration USART1 full, will receive the data transmitted V6-LED1 flashes that are sending and receiving data.
USART1
- stm32的串口程序，开发软件是keil4-Stm32 of serial program, develop software is keil4
USART
- 在万利199元开发板上实现了uCOS-II移植到STM32的操作，建立了LED闪烁任务以及USART1向计算机发送数据的任务。-Manley 199 yuan in the development board implements the STM32 uCOS-II ported to the operation, the establishment of the task and the LED flashes USART1 send data to the computer task.
USART1
- 基于金牛开发板的C代码 usart1的测试代码，keil工程-Based the Taurus development board C code usart1 of the test code, keil project
USART1-polling
- USART1采用查询方式+ucos-iii实现-USART1 using queries+ucos-iii realization
STM32-screen-P-USART1
- stm32+ucos+ucgui编写的USART1通信例程-STM32+ UCOS_UCGUI serial communication routines written USART1
stm32-modbus-USART1-TIM2
- 用stm32的usart1和tim2模块实现了modbus从站协议。IAR编译环境。-usart1 and tim2 module implements modbus slave protocol. IAR compiler environment.
USART1
- SMT32 usart1(非阻塞) 中断接收，DMA发送
STM32F207VC-RS485-USART1
- STM32F207VC RS485使用USART1-STM32F207VC RS485 use USART1
usart1
- avr atmega128 usart1 sample
IAP_USART1
- stm32通过usart1串口实现IAP功能。(STM32 through the usart1 serial port to achieve IAP function.)
stm32单片机通过USART1 收发数据
- stm32单片机通过USART1 收发数据通过串口调试软件，向板子发送数据，板子接收到数据后，立即回传给电脑。 库版本 ST3.0.0(STM32 MCU through the USART1 data through the serial debugging software to send data to the board, the board receives the data, immediately back to the computer. Librar
USART1
- 基于stm32的简单应用，usart1的数据收发(Simple application based on STM32, data receiving and receiving of usart1)