搜索资源列表
AVRdcmp
- 我用AVR读取触摸屏，然后用8位数据总线发给上位机，触摸屏可以，通讯部分还在调-I used to read touch screen, and then use the eight data bus to the PC, Touchscreen can, Some also stressed communication
can_bus_control
- 这个是机器人控制器的下位机程序，在8051下编译通过。可以与CAN总线上位机通讯，里面还包含了一些算法的实现。-the robot controller is the next crew, and in 8051 under compile. CAN Bus with PC communications, which also included some algorithm.
USB1.1C51code
- USBD12芯片通讯的上位机调试源代码，本版本部分资源已汉化，并解决英文版不能编译问题-USBD12 Chip PC communications debugging source code, the version of some of the resources already signified. English and can not solve the problem Compiler
CANvb
- CAN上位机通讯程序vb与单片机通信时用的上位机程序
CAN
- TMS320LF2407的can程序，与上位机通讯，上位机需要PCI9810转接卡，具体应用需要修改一下，里面有自定义简单协议，但CAN具体流程都包含，欢迎下载
STC12.rar
- 串口通信，能够实现上位机与下位机的通讯，并可接收上位机的控制码，实现控制功能，同时发出控制信号，实现控制功能。,serial signal interface,can send signal to the computer,also can receive the signal from the PC
ad7862
- 能够实现上下位机的通讯，AD数据转换，可从上位机控制，用于波形，频率等控制-Upper and lower drive to achieve communication, AD data conversion can be controlled from the host computer for the waveform and frequency control
ch4come
- 甲烷浓度采集，控制电机转速，CAN与上位机通讯。-Methane capture and control the motor speed, CAN and PC communications.
F2812_CANTX
- 2812电流电压采样，用于电源管理，以及通过CAN 与上位机通讯-2812 sampling current and voltage, for power management, as well as through CAN communication with the host computer.
CAN
- 基于C8051F040的CAN通讯程序，包括上位机对下位机节点号、波特率的修改，传输模拟量、数字量等-C8051F040 CAN communication procedures, including the host computer to the next bit machine node number and baud rate changes, the transmission of analog, digital, etc.
dsp28335--can
- dsp28335中can模块的驱动程序，可进行数据的接收和发送，可用于上位机和下位机之间的通讯，已在工程中得以应用-dsp28335 can module driver can receive and send data, can be used for communication between the upper and lower machine has to be applied in the project
CANmain
- Can总线双机通讯上位机源码，有命令模式及数据通信模式，数据通过串口打印到PC端串口调试助手-Can bus-machine communication PC source, there is command mode and data communication mode, the print data to the PC via the serial port debugging assistant
CANcong
- 基于stm32的Can总线双机通讯上位机源码，有命令模式及数据通信模式，数据通过串口打印到PC端串口调试助手-The Can-bus based stm32-machine communication PC source, there is command mode and data communication mode, data is printed to the PC via the serial port debugging assistant
CAN
- ARM的通讯功能，实现与上位机通讯的基本功能，大家互相学习一下-ARM s communication function for communication with the host computer s basic functions, we learn each other about
智能水炮区域箱控制程序
- 本程序是智能水炮区域箱控制程序，与上位机（PC）和下位机（水炮、电源盒、红外组件）通过can连接，遇火报警，同事控制水炮灭火动作。
上位机串口通讯
- 自己写的比较完整的上位机串口助手，可以跟下位机建立通讯，并接发数据(Write your own complete PC serial assistant, can establish communication with the lower machine, and sending and receiving data)
can总线协议
- CAN 总线协议 基于STM32 上位机通讯(CAN bus protocol based on STM32 PC communication)
串口 通讯和选择开关控制继电器
- 作者 raojun 自己写的一个用库函数方式操作单片机来实现对工业设备控制，并且可以用单片机的串口通讯与外界的系统交互！ 您可以稍作修改来用于制作用一部上位机来远程控制的机器！(The author raojun wrote a library function to operate the single-chip microcomputer to control industrial equipment, and it can interact with the external syste
针对周立功公司的USBCAN-II型CAN卡的各种通讯子VI
- 实现与周立功CAN板卡间通讯的上位机，内部有CAN波特率计算工具((Implementation and ZLG CAN communication between PC boards, internal CAN baud rate calculation tool, complete basic communication))
串口通讯
- 利用FPGA 收发串口数据，可与上位机以及其它芯片通信(Using FPGA to send and receive serial data, it can communicate with the host computer and other chips.)