搜索资源列表
newest_dc_soft
- 电磁流量计的源程序。将流体流量用电磁转换方式变换成弱电信号，经消噪放大后由CPU处理再转显示。可显示瞬时流量，正反向的累计流量，净流量等等。-electromagnetic flowmeter of the source. Fluid flow of electromagnetic conversion conversions into weak signal amplification by denoising after the CPU sub show. Can show that the
8x8LEDflow
- 8x8 LED 点阵流动显示技术。 流动显示10个字符。-8x8 LED dot matrix display technology flows. 10 characters flow visualization.
rter
- 间隔一定时间，第一次一个管亮流动一次(注意每个都要流动一次)，第二次两个管亮流动，依次到8个管亮，之后，第一次最后一个管亮，第二次倒数两个管亮，然后重复整个过程。<<与_crol_的综合应用-A certain time interval, a first movement of a light tube (Note that each should flow once), and the second two tube light flows, followed by the ei
danpianji
- 1.8个流水灯先会从上到下流动一遍，同时蜂鸣器发声。 2.接着DAC电流指示灯由暗变亮 3.接着前三位数码管显示温度值 4.接着AD数值显示在数码管的前三位-1.8 water flows from top to bottom lights will be again, at the same time audible buzzer. 2. And then the current DAC become bright light from the dark 3. And then t
2
- 间隔300ms先奇数亮再偶数亮，循环三次；一个灯上下循环三次；两个分别从两边往中间流动三次；再从中间往两边流动三次；8个全部闪烁3次；关闭发光管，程序停止。-300ms interval first and then odd bright even light, the cycle three times a circle of lights up and down three times two sides to the middle of the flow from the three
huibianliushuideng
- 查询方式控制灯闪时间间隔的汇编流水灯程序：由高到低，然后由低到高流动，再全暗全亮三次-Query control time interval lights flash lamp process flow of the compilation: high to low, and then from low to high flows, and then the whole light dark three-wide. . .
lantern
- 流水灯控制，以及控制音乐播放器，已调试成功，可以运行。-Flows the lantern floated down river control, as well as the control music player, has debugged successfully, may move.
edef
- 文章介绍了用AT89S8252单片机的串行接口与智能温度巡回检测仪（XJ-08S）通过RS—485总线相互通讯实现热水温度远程显示的一种低成本解决方案，内容涉及RS—485总线通讯、单片机驱动数码管显示、数据转换以及键盘处理软硬件设计等内容-Automatic process control is concerned with maintaining process variables temperatures pressures flows compositions, and the lik
XilinxISE8
- This tutorial gives a descr iption of the features and additions to Xilinx® ISE™ 8.2i. The primary focus of this tutorial is to show the relationship among the design entry tools, Xilinx and third-party tools, and the design implementatio
WindowsCE_NET_Eboot
- WindowsCE_NET系统下Eboot开发 :从BootLoader概念出发,讨论了Windows CE. NET系统下Eboot (以太网BootLoader)作用及其嵌入式开发环境,分析了Eboot代码结构及函数执行流程,给出了Eboot编程模型、算法框架并叙述了开发方法。-Beginning with the concep tion ofBootLoader, the action of Eboot (EthernetBootLoader) and the development
LM386
- 设计并制作一个电能收集充电器，充电器及测试原理示意图如图1。该充电器的核心为直流电源变换器，它从一直流电源中吸收电能，以尽可能大的电流充入一个可充电池。-Design and production of electrical energy to collect a charger, charger and test schematic diagram of Figure 1. The core of the charger DC power converters, which flows fro
multichannelfaultannunciation
- In this fast forwarded world we are trying to reduce the manpower and trying to automate all the systems to improve the speed and also the accuracy. The project flows in this pattern. The different sensors are placed in different zones in an indust
DFIG
- Abstract— This paper introduces an advanced monitoring and diagnosis system for the detection of incipient electrical faults in doubly fed induction generators used in wind turbines. In this application, the rotor is supplied by a static converter
rfc5009.txt
- This document describes a private Session Initiation Protocol (SIP) header field (P-header) to be used by the European Telecommunications Standards Institute (ETSI) Telecommunications and Internet-converged Services and Protocols for Advanced N
39_bus
- IEEE 39 bus data, line data and generator data for performing the power flow or load flow and optimal power flows
Three-Dimensional-Lattice-Boltzmann-Model-for-Hig
- Three-Dimensional Lattice Boltzmann Model for High-Speed Compressible Flows
tynsjcdq
- 太阳能手机充电器，电池，单片机，智能，BUCK变换器 经过DC/DC变换电路处理后，由充电电路为负载供电。锂电池一般不宜采用全过程恒流充电方式，而是采取开始恒流快速充电，待电池电压上升到设定值时，自动转入恒压充电的方式，并且这样有利于保存电池容量。充电过程中采用LED灯、数码管指示，系统中设计有完备的过流过压保护，避免因电池过度充电而损坏，并且充电器采用模块式结构和USB接口，可对手机、MP3、摄像机等多种数码产品充电。-Solar cell phone chargers, batterie
delay
- 89S52 单片机的P1 口接有 8个 LED，当某一端口输出为“0”时， 相应的 LED 点亮，P3.2、P3.3、P3.4、P3.5 分别接有四个按钮 K1~K4，按下按钮时，相应 引脚被接地。现要求编写可键控的流水灯程序，当 K1 按下时，开始流动，K2 按下时停止 流动，全部灯灭，K3 使灯由上往下流动，K4 使灯由下往上流动。 -P1 port access 89S52 microcontroller with 8 LED, when the port outputs a
led
- 流水灯的VHDL程序 晶振6MHZ,里面包含分频部分与3线八线译码器-LED FLOWS
adpcm_decorde_corde
- 该程序用于处理音频数据，将从声卡直接采集的pcm格式的数据压缩成adpcm格式进行传输，从而达到节省流量的目的。-The procedure for processing audio data, collected directly from the sound card pcm format of the data compression into a transmission format adpcm to achieve the purpose of saving flows.