搜索资源列表
RS232串口通信协议
- RS232串口通信协议，verilog实现，通过FPGA完全调通。,RS232 serial communication protocol, verilog achieved entirely through the FPGA transfer pass.
FPGA-URAT.rar
- FPGA与PC串口自动收发程序,verilog源程序,FPGA and the PC serial port automatically sending and receiving process, verilog source code
rs232
- 完整的RS232 Verilog源代码，支持波特率可调，支持调试命令，配合串口调试工具，可作为FPGA开发中的调试平台。-Full RS232 Verilog source code, support for baud rate is adjustable to support debugging command, with the serial debugging tools can be used as the debugging FPGA development platform.
uart_EP3C16_FIFO
- Verilog编写的串口RS232收发字符串程序,使用FIFO作为数据缓冲区,有效收发字符串长度为256字节,解决了利用串口调试工具与FPGA通讯只能收发单字节的问题.-Programs for uart/RS232, it can receive and transmit strings.
Serial
- FPGA与PC串口通信的Verilog HDL 程序-FPGA and the PC serial communication procedures Verilog HDL
UART
- 用FPGA开发的串口通信的程序，代码是用verilog编写的，希望对大家有用！-Serial communication with the FPGA development process, the code is written in verilog and hope for all of us!
edaok_UART_FPGA
- 用FPGA实现UART的串口通信，可以设置数据位，校验位，奇偶校验等-With the FPGA to achieve UART serial communication, you can set the data bits, parity bit, parity, etc.
sim_uart
- uart 收发器 verilog 代码，实现自收发功能 sys clk = 25m, baud 9600 停止位1， 无校验位； 代码实现了串口自收发功能，及把从 PC 收到的内容都发送会 PC, 其他波特率，自行修改代码即可，在 alter 的FPGA 上调试通过； -verilog code uart transceiver to achieve self-transceiver function sys clk = 25m, baud 9600 1 stop bit, no par
FPGUART
- verilog语言，FPGA，串口。 波特率9600，数据位8位，停止位1.-verilog language, FPGA, serial. 9600 baud, 8 data bits, 1 stop bit.
r232
- verilog下fpga串口，波特率115200，与PC通信-Under verilog fpga serial port, baud rate 115200, and PC communication
FPGA
- FPGA串口通信 Verilog -FPGA UART uartFPGA UART
S8_UART
- FPGA串口Verilog程序，用的芯片是xilinx spantan6-The FPGA serial Verilog the program chip with xilinx spantan6
FPGA-Uart
- fpga串口通讯程序。用Verilog语言编写-fpga serial communication program. Verilog
FPGA--uart
- FPGA串口通信源码,通过Verilog来实现功能，新手可以参考下-FPGA uart
fpga-verilog-my_uart
- FPGA串口通信，另一种方法，总共用了三种方法，请点击用户名查看，总有你满意的-FPGA Serial communication
uart_test
- 基于FPGA 的sparten-6 AX-309片内串口uart通信例子(FPGA sparten-6 AX-309 uart connection example)
IIC读写EEPROM发送到PC串口
- 能实现用IIC读EEPROM并且将读取的数据通过串口发送到PC端，以及在PC端通过串口发送数据给FPGA，再利用IIC将数据写入EEPROM(The program can realize that FPGA read the data from EEPROM by IIC and then send it to PC by UART,and that PC send the data to FPGA by UART and then write the data to EEPROM by
07_uart_test
- fpga 串口 Verilog 黑金的板子，入门(fpga uart test xilinx)
verilog串口通信程序
- 串口通信程序，用于fpga的串口收发，并讲解了串口通信原理。(Serial communication program is used to receive and transmit the serial port of FPGA, and the principle of serial communication is explained.)
No.201710061347=UART_Verilog
- 1.硬件平台： FPGA； 2.编程语言： Verilog； 3.串口通信RS232的Verilog实现版本；(1. hardware platform: FPGA; 2. programming language: Verilog; The Verilog implementation version of 3. serial port communication RS232;)