搜索资源列表
biometrics.v0.1.tar
- 不包含识别算法,在m68k-elf-gcc 2.95.3下编译通过,还没做实物测试。包含了系统初始化和液晶显示模块,传感器数据录入。 -does not include recognition algorithm, the m68k - elf-gcc 2.95.3 under compile, No physical tests done. Includes system initialization and LCD modules, sensor data input.
singlejpeg
- 这是一个压缩文件内是tar文件,解压后可看到完整文件,要在linux下解压tar文件,make(arm-linux-gcc 用的是2.95.3)后把生成的目标文件下载到2410开发板上,运行可在/temp下得到1.jpg的图片,当然你的摄像头和驱动已经加载成功。
UDA1341TS_
- 这个驱动的移植主要是是将原来的2..4.18内核中的1341驱动程序直接往2.6.11上移植的,没有采用ALSA。移植过程中也曾经参考过一些资料,具体是哪位大虾的资料忘记了,在此感谢文中所参考的资料的大虾们 硬件环境:SBC-2410X开发板(CPU:S3C2410X) 内核版本:2.6.11.1 运行环境:Debian2.6.8 交叉编译环境:gcc-3.3.4-glibc-2.3.3 第一部分 声卡UDA1341TS驱动程序播放部分的移植 一、从网上将Linux内核源
libstdc++-v3[1].0.97-gcc-3.1.x.tar
- 测试手写程序,一个很好的EVC小程序,希望大家能够交流学习
smp86xx_rootfs.tar.bz2
- sigma smp8634/8635 toolchain rootfs building source. ================= Readme.txt ================= This is the Sigma Designs customization of the root file system for the SMP86xx family of chips. This package is of course
LPC3250_u-boot-1.3.3.tar
- NXP公司的ARM9 (LPC3250)下,绝对可用的uboot 源代码。网络、sdram、flash等一切正常。而且非常可靠。u-boot 的版本号是:1.3.3 .用ARM-linux-gcc 编译。-NXP' s ARM9 (LPC3250), the absolute uboot source code available. Network, sdram, flash and all is normal. And very reliable. u-boot version number
arm-linux-gcc-3.4.5-gdb-6.8-insight-6.8-cygwin.tar
- cygwin下的arm交叉编译工具 包括: arm-linux-gcc-3.4.5 arm-linux-gdb-6.8 arm-linux-insight-6.8 -cygwin under the arm cross compiler tools include: arm-linux-gcc-3.4.5 arm-linux-gdb-6.8 arm-linux-insight-6.8
arm-linux-gcc-3.4.1.tar.bz2
- arm-linux-gcc交叉编译工具的安装说明-arm-linux-gcc cross-compiler tool installation instructions
openjpeg-1.5.1-Imote2.tar
- OpenJPEG-1.5.1 compiled for Imote2 (with arm-xscale-linux-gnu), sorry that you have to place them in their respective directory manually. To compile yourself: 1. Download cross compiler arm-xscale-linux-gnu. 2. Download zlib, cross compil
e2fsprogs-1.39.tar.gz
- e2fsprogs-1.39.tar.gz,LFS6.2软件包 step 1: 解压:e2fsprogs-1.39.tar.gz 到 e2fs目录下 step 2: # cd e2fs step 3: #mkdir build #cd build #../configure --host=arm-linux --enable-elf-shlibs--with-cc=arm-linux-gcc --with-linker=arm-linux-ld -- prefix=/us