搜索资源列表
Example_Menu_LCD_TFT
- Use of MENU contextal in mbed and TFT LCD of 320x240, hx8347d controller Hymax.
MT9D111_test_uvision_lpc1768
- MT9D111 testcode for mbed platform. I2C communication is working fine. Picture grabbing still has some problems
LPC1768-Xplorer
- LPC1768-Xplorer is a CORTEX-M3 based stamp board for NGX’s mbed-Xpresso Baseboard. The LPC1768 microcontroller has 512KB of internal flash and 64KB RAM. Ethernet MAC, USB Device/Host/OTG interface, 8-channel general purpose DMA controller, 4 UARTs, 2
DDS
- ATMEl AT89X5x 系列单片机操作AD9834 DDS芯片的代码，使用COM1口，配置成移位输出方式。-this code illusrate how to control AD9834 DDS chip with ATMEL AT89X5X series MCU.the UART port of the mcu shoud be configured as shift output mode.
USB
- USB HID device implementation for mbed kit (LPC1768).
aaaaa_ISPREFLASH
- USB dongle with mbed using a LPC1768
hcsr04_test_uvision_lpc1768
- Test code to test the HC-SR04 on the mbed platform. The HC-SR04 can measure distance up to 4.5m
eeprom_rw_uvision_lpc1768
- Test code to read/write 24x04 24x64, etc on the mbed platform. This program reads the complete content and writes it to internal storage and writes file back to eeprom
EasyWeb_DM9161
- mbed Easyweb LPC1768 with DM9161A
SPI_TFT_ILI9320
- mbed SPI TFT ILI9320 code
Synth
- mbed LPC1768 synth example
DOGLCDDemo-(3D)
- mbed LPC1768 DOGLCDdemo
USBSerial_nucleo_f103rb
- mbed平台下USB模拟串口的源码,USB mbed platform simulation source of the serial port-USB mbed platform simulation source of the serial port
1114ledblink
- mbed写的外设驱动库，适用于LPC1114，同时对Cortex-M0编程具有很好的参考价值。-mbed wrote peripheral driver library for LPC1114, but also has a good reference value for the Cortex-M0 programming.
Program3_LPC1768.bin
- 有关于mbed控制SPTD开关控制红绿LED的程序。 -About mbed control SPTD red and green LED switch control program.
LCD5110
- MBED库编写的简单温度计例程，通过I2C读取TMP275温度传感器，然后再使用SPI驱动LCD5110显示当前温度值。-MBED library routines to prepare a simple thermometer, by reading the TMP275 I2C temperature sensor, then use SPI driver LCD5110 displays the current temperature.
saveToUSB_mbedppBOARD_uvision5_lpc1768
- save txt file to usb using mbed application board
Nucleo_Template_uvision5_nucleo_f103rb
- 将ARM mbed平台的库文件移植到大部分STM32 F103xx MCU上编译运行。 建议MDK 5.22以上，并且需要安装相应的支持包。(Ported the library files of the ARM mbed platform to most STM32 F103xx MCU to compile and run. Suggest MDK above 5.22, and need to install the corresponding support package.)
Nucleo_blink_led_uvision5_nucleo_l073rz
- mbed 写的点灯程序，导出到了KEIL MDK，可以离线编译(Mbed wrote the light program, exported to the KEIL MDK, you can compile offline)
stm32 mbed入门学习笔记_代码（24篇全）
- mbed入门资料，从mbed官网学习时为每份知识生成一份keil工程(Mbed introductory information)