搜索资源列表
KeyandLed1
- holtek的按键模块, asm编程，支持5*5键扫。按键控制IO输出。-HOLTEK button module, asm programming support 5 * 5 keys sweep. IO output control buttons.
systemcTOVerlogHDL
- 一个带波形输出的扫频模板systemC源程序， 该程序在SystemCStudio开发平台下生成， 实现systemC仿真、波形显示以及自动生成Verilog HDL代码。-waveform output with a sweep of the template systemC source, SystemCStudio the program development platform in the next generation, realize systemC simulation,
DDS_Power
- FPGA上的VERILOG语言编程。通过查找表实现直接数字频率合成。在主控部分通过键盘选择正弦波，方波，三角波，斜波，以及四种波形的任意两种的叠加，以及四种波形的叠加；通过控制频率控制字C的大小，以控制输出波形频率，实现1Hz的微调；通过地址变换实现波形相位256级可调；通过DAC0832使波形幅值256级可调；通过FPGA内部RAM实现波形存储回放；并实现了每秒100HZ扫频。-FPGA on the verilog language programming. Lookup table thr
DDS+51
- 本程序功能: DDS文件夹内的程序，完成直接数字频率合成功能,有正弦,三角,方波三种波形,并能扫频. 可通过键盘操作设置频率参数和选择波形种类和控制运行. 由两部分组成,\"C\"文件夹内,是用于在 51 单片机上运行的 C语言程序, \"Verilog\"文件夹内,是用Verilog语言编写的 FPGA 程序.-this program functions : DDS folder procedures, complete direct digital frequency s
5digital-led-sweep
- ATMEGA16使用的5位数码管动态扫描程序。
键盘描扫程序
- 单片机键盘描扫程序. 一直在用的程序.-SCM keyboard depiction sweep procedures. Have been used in the procedure.
emc_key
- 键盘扫描程序 台湾义隆EMC汇编,程序后缀DT C0-C3 R0-R5 4*6键扫-keyboard Scan Taiwan Elan EMC compilation procedures suffix DT C0-C3 R0-R5 4 * 6 keys sweep
FM_chirp.rar
- 最近作的AD9852的FM扫频模式，自动计算频率，采用单片机的总线访问方式，非常方便，你要做 的就是填数,Recently, the AD9852 for the FM sweep mode, automatic calculation of the frequency of the use of single-chip bus access method, a very convenient, you have to do is fill in a few
AD9851.rar
- AD9851在通讯系统中的应用，主要在信号源，扫频仪，示波器等的应用,AD9851 in the communication system, mainly in the signal source, Sweep, oscilloscopes, etc. Application
AD9851
- 51单片机控制ad9851进行扫频，包含初始化和写频率控制字-51 single-chip control ad9851 to sweep, including the initialization and the frequency control word write
Local-oscillation
- 51单片机控制TLC5618产生锯齿波，作为本振的触发信号，并通过写ad9851的频率控制字来产生扫频信号-51 SCM TLC5618 produce sawtooth, as the vibration of the trigger signal, and by writing ad9851 frequency control word to generate sweep signal
AD9854-SPI
- AD9854 SPI串行控制开发资料 资料包括 AD9854 芯片手册 AD9854 芯片手册对照翻译（阅读手册时自己整理的） AD9854频率控制字简易计算器 (写来自用的) SPI方式操作AD9854的历程（基于MSP430F149） SPI方式操作AD9854扫频的历程（基于MSP430F149） 其他参考历程 AD9854 SPI串行控制调试体会（我的博客文章） 等 -AD9854 SPI serial control data
AD9850-sweep-frequency
- 基于AD9850的扫频程序，并通过NOKIA5110显示当前的频率值。用keil 4编译。-Based on AD9850 sweep program and displays the current frequency by NOKIA5110 value. Compiled using keil 4.
mtd
- MTD定点浮点仿真，可直接用于fpga算法的仿真程序，产生了扫频信号，仿真直接输出系统频率响应函数，为系统测试带来好处-MTD fixed-point floating-point simulation, fpga algorithm can be used directly in the simulation program to produce a sweep signal, the direct simulation output system frequency response fun
SweepGenerator
- This is a working Sweep-Generator CCS C Programm. It runs on pic24 and dsPIC33. It controls the AD9850 DDS board connected in serial mode via pin data_7. There are 3 buttons that control the program state. Two led diodes on pin_b2 and pin_b3 indicate
51-sweep-program-
- dds protel电路图 ad9850输出扫频信号，调试通过 -dds protel ad9850 output sweep signal debugging through
frequency-sweep
- 扫频程序可实现1-10mhz的扫频，定时器控制间隔时间，调试通过可运行显示波形-Sweep program can achieve a 1-10mhz sweep timer control interval, debugging waveform can run the show
msp430-sweep-signal
- msp430产生扫频信号并识别输入信号频率-msp430 sweep signal and generates the input signal frequency identification
Sweep-Signal-Generator
- Sweep/Signal Generator LPC2138
AD9850-sweep
- 利用C8051F040单片机和AD9850产生扫频信号，经测试，输出扫频信号稳定。欢迎下载！-Use C8051F040 microcontroller and AD9850 sweep signal generated by the test, the output sweep signal stability. Welcome to download!