搜索资源列表
c环境下的编译器
- 在c环境下的编译器 一.实验完成主要功能描述: 1.if语句 2.if_else语句 3.while语句 4.数组 5.函数调用 6.对外部函数printf的调用(用于打印) 二.测试环境 1.fedora core 4(OS) 2.lex version 2.5.4 3.yacc 4.gcc (GCC) 4.0.0 20050519 (Red Hat 4.0.0-8) -in the context of a compiler. Exper
LCD_DEMO-1
- lcddemo-1（2004版） -- 320X240 STN 灰度LCD 测试 此代码在SDT2.51下调试通过。运行时LED会闪烁一下，接着串口0会输出一些系统信息,在波特率为57600超级终端可看到,打印出来的由ASCII字符组成的 FS44B0X图样，此时LCD上显示ascii字符组成的ARM图样。通过串口终端与系统交互，可以测试320X240 STN LCD,包括图形显示函数，ascii字符显示函数。 -lcddemo-1 (2004 version) -- 320x240
S3C44B0X例子程序2
- 1. beep -- PWM测试 为 ADS1.2 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后在57600的超级终端里按PC机键盘的“+”“-” 按键，可以听到BUZZ增大减小的声音。 2. key -- 按键测试 为 SDT2.51 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后按FS44B0X上的按键key1 key2 key3 key4 相应的发光二极管亮 3 keyint -- 按键中断测试 该项目在SDT2.51下编
pcbind
- This a two node test, requires a Coordinator and an RFD. The coordinator and node simply ping-pong a packet back and forth, and print out the RSSI byte. The RFD waits before bouncing it back, while the coordinator responds immediately.-This
嵌入式 linux串口实例
- 嵌入式串口实例，有部分测试程序，功能：每隔2秒发送“1234567890”，并打印内容。接受也是每2秒一次，并打印内容，出错时打印出错信息-example, some of the test procedures, functions : every two seconds to send "1234567890", and print content. Each also received a two seconds, and Print, Print error erro
ddd
- 配合hzk16可以在屏幕上打印点阵汉字，可以用于测试hzk16，或用于其他相关。-With hzk16 can print dot matrix characters on the screen can be used to test hzk16, or for other related.
DSP_VECTST
- DSP算法（ANSI_C） TEST VECTOR MACROS INPUTS: NONE OUTPUTS: PRINT OF TEST VECTORS-DSP algorithm (ANSI_C) TEST VECTOR MACROSINPUTS: NONEOUTPUTS: PRINT OF TEST VECTORS
PrCEDemo_Source
- WinCE PDA打印机测试程序，了解WinCE下PDA打印程序-WinCE PDA printer print test code
printer
- 这是我测试串行口打印机的程序，可以打印汉字、字符等。-This is my test program the serial port printer, you can print Chinese characters, characters and so on.
p87c591_i2c
- This file contains example code to print over the serial port of the P87C591 MCU and Evaultion Board (EVAL-P87C591QS). This example will test the I2C function of the P87C591. This will be done by writing and reading from a serial A/D & D/A (P8591
ledblink
- For non-embedded programmers the first thing to try on a new system or in a new programming language is to print out "hello world". The equivalent for microcontrollers and other embedded systems is to blink a LED. When even the target circuit and the
test
- 电容式触摸按键SGT002的C51测试程序,功能强大,通过串口打印相关的信息,含去干扰算法-Capacitive touch buttons of SGT002 C51 test program, powerful, through a serial port print related information, including to disturb the algorithm
usb
- s3c2410上裸跑的USB DEVICE测试程序，可以从串口打印到minicom上，测试程序不用烧写NAND flash，有uboot即可，不用仿真器比如j-link之类-s3c2410 running naked on the USB DEVICE test program, you can print from the serial port to minicom, the test program without programming NAND flash, a uboot can,
touch
- 本实验是一个触摸屏实验，实验者触摸实验板的LCD屏幕，将从串口打印出当前点的坐标值。实验中需要定义触摸屏相关的数据结构TS_EVENT，数据结构TS_EVENT的内容包括按下触摸屏时的压力，位置。 实验环境： 创维特CVTs3c2410开发板 Redhat9.0-This experiment is a touch-screen experiment, the experimenter touch panel LCD screen test, print out the serial
power-test
- 这是用VB6.0开发的一款电力仪表测试软件,用与测试相关的参数,并且打印报表-This is the development of a power meter VB6.0 test software, with test-related parameters, and print reports
stm32-ps2-mouse-test
- stm32鼠标试验，ps2接口，可以串口打印出鼠标移动和按键信息，在开发板例程的基础上做了修改移植到了自己的板子上-stm32-ps2 mouse test,it can print the information of mouse s movement and key using usart.
test-hs0038b.tar
- 红外遥控GPIO口测试程序，若读到数据则打印出信息-Infrared remote the GPIO port test program. information will be print out if data is read
ADC_UART
- 嵌入式处理器，开发6410，能实现串口测试，打印ad信息-Embedded processor 6410, development, can realize serial port test, print AD information
STM8-EEPROM
- STM8单片机E2PROM测试通过串口打印到串口。-STM8 MCU E2PROM test print through the serial port to the serial port.
5883L-test
- 磁阻传感器HMC5983通过模拟IIC与51内核的单片机CC2530的使用，裸机操作，通过串口打印方向信息。-Magnetoresistive sensor HMC5983 through simulation IIC with 51 core microcontroller CC2530 use of bare metal, through the serial port to print the direction information.