搜索资源列表
grlib-eval-1.0.2a.tar
- The GRLIB IP Library is an integrated set of reusable IP cores, designed for system-on-chip (SOC) development. The IP cores are centered around the common on-chip bus, and use a coherent method for simulation and synthesis. The library is vendor inde
CYPRESS_A3load
- a3load is 8051 firmware that can be used for uploading or downloading to EZ-USB RAM (internal or external). It implements the vendor specific command bRequest = 0xA3. The address to download/upload to/from is specified in the wValue field of t
PLDESIGNQA91
- 这是硬件逻辑设计的一份参考资料，总结了目前主流FPGA供应商设计的注意事项。-This is a hardware logic design of a reference, summed up the current mainstream FPGA vendor design for attention.
6.5_ide_test
- IDE接口实验 Embest Teach Kit II boot success Embest 44B0X Evaluation Board(EduKit II) IDE Test Example Model Number : SUNDOM 32M Serial Number: SN20030928-V1.02C Version : Ver 2.0 Vendor ID : -Embest IDE Interface Kit II Teach Em boot su
Cypress_ax
- cpress usb 芯片Vender 处理固件。 The purpose of this software is to demonstrate how to implement vendor specific commands. The following vendor specific commands are implemented: A0 Firmware Upload/Download A2 EEProm Load A3 External Ram Load
DT128_D12_DriverStudio
- 用DriverStudio 3.2的DriverWizard向导制作的PDIUSBD12读写驱动程序(控制器使用飞思卡尔单片机MC9S12DT128B),并附带测试的应用程序,实现了读写In和Out功能以及厂商请求功能Vendor Request,工程内附带Inf文件和DriverStudio工程xml配置文件,可以自行修改,希望能帮到大家,共同进步
svf2vme
- 在嵌入式系统中对Lattice CPLD软件升级时所需的VME文件生成所需源代码。将一个链上的不同厂家的CPLD产生的SVF文件转换成VME文件--Generate the VME file required for updating Lattice CPLD in embedded systems. It could convert SVF files from different vendor s CPLD to VME file.
surfConfPciDevice
- 显存地址映射。只要知道该类PCI设备的Vendor号，Device号和索引号myIndex，就可以查找到该类PCI设备的MEMORY地址和IO地址，以及中断级。并将第一个MEMORY地址给出它的从物理地址到虚拟地址的映射。-memory address mapping. If that such equipment Vendor PCI, Device and No. myIndex Index, it can find to such equipment PCI Memory addresse
STC_ISP_V480
- STC_ISP_V480为MPC89E52系列单片机的串口下载专用协议，里面的型号很详细-There are 512 bytes on-chip RAM embedded that provide requirement from wide field application. The user can configure the device to run in 12 clocks per machine cycle, and get the same performance just
PCI_Bus_Demystified_2nd_Ed
- This book is intended as a thorough introduction to both PCI and PCI-X. Is a “companion” to the specifications. If you’re designing boards or systems using offthe-shelf PCI interface silicon, this book together with the silicon vendor’s data sheets s
dev_io
- Cypress公司的FX2系列，USB2.0器件，CY7C68013关于使用Vendor Command 的firmware源码。用Keil uVision2打开。-Cypress s FX2 Series, USB2.0 device, CY7C68013 on the use of the Vendor Command source firmware. Using Keil uVision2 open.
Vend_ax
- This directory contains the 8051 firmware Vend_Ax source code for the Cypress EZ-USB chip. The purpose of this software is to demonstrate how to implement vendor specific commands. The following vendor specific commands are implemented:
PICSPWM
- UPS目前分为在线式和后备式等，目前，主流的UPS厂商为EAST（易事特）、深圳山特、东莞优玛电气UMART、APC、 伊顿、爱默生等，都提供各种级别的UPS满足不同用户群的需要-UPS is currently divided into line and back-up type, such as, at present, the UPS vendor for the mainstream EAST (special easy), Santak Shenzhen, Dongguan Elect
Vend_ax
- Contains the source files to build a vendor specific command sample. The purpose of this software is to demonstrate how to implement vendor specific commands. See the readme.txt file for details.
cp2102(chinese)
- 单芯片 USB 转 UART 数据转换器 - 集成的 USB 收发器无需外部电阻 - 集成的时钟无需外部振荡器 - 集成的 512 字节 EEPROM 用于为供应商代码产品代码序列号功率标牌版本号和产品描述等数据提供存储空间 - 片内上电复位电路 - 片内电压调节器3.3V 输出 USB 功能控制器 -符合USB 规范 2.0 全速 (12 Mbps) -通过SUSPEND 和 RI 引脚支持的USB中止状态-Single-Chip USB to UART Dat
Vend_ax
- This firmware demonstrates vendor request implementation for ezusb
Faraday_rtl
- These designs were developed by Faraday Technology Corporation, a fabless ASIC vendor and silicon Intellectual property (SIP) provider in order.-Faraday Technology Corporation, a fabless ASIC vendor and silicon Intellectual property (SIP) provider in
8816B_FW_New
- TW8816主要用于车载LCD的驱动芯片，这个是TW8816厂商提供的源驱动代码-TW8816 is mainly used for LCD driver chip board, this is the source vendor TW8816 driver code
hcs301-programer
- 此程序为hcs301的编程器，主要编写厂商代码，序列号等 本程序是通过windows的超级终端对编程器进行操作的，请将超级终端波特率设置成-This program is hcs301 programmer, mainly writing vendor code, serial number, etc. This program is through the windows of the super terminal to operate on the programmer, set
Creating-vendor-services-
- csr1010创建厂家指定的服务非常有用，大家可以下载看看 ， 大家可以下载看看，-Creating vendor-specific services with CSR µ Energy SDK (GATT server source code)