搜索资源列表
s3c44B0MOTOR
- 基于ARM7的S3C44BO基础测试实验:步进电机驱动实验.
MOTOR
- 基于STM32的电机控制开发 经过测试效果很好-Based on the STM32 Motor Control Development has been tested with good results
dianji
- stm32 关于控制电机的子程序，经测试可以实现对伺服电机的精确控制。-stm32 on the control of the motor subroutine, the test can achieve precise control of the servo motor.
Moto_C
- 直流电机实验测试程序，在arm7+ads1.2的平台下试验-DC motor experimental test procedure, in the arm7+ ads1.2 Test platform
demo
- 下面是目录介绍 ADC---------ADC模数转换实验 ASM---------汇编程序实验 ASM_c-------汇编和C语言混合实验 CF----------CF读写实验 DcMotor-----直流电机实验 DMA——-----DMA数据传输实验 GPRS--------GPRS/GSM通讯实验 GPS---------GPS全球定位实验 IDE---------IDE测试实验 IIC---------IIC读写实验 IIS--------
scissors
- 应用在纺织机械上剪刀夹子的测试程序，控制电机的运动来检测其好坏lm2B93-Application in the textile machinery scissors clamp test procedures, control motor movement to detect the quality of lm2B93
dianji
- 一款机器人的电机测试程序，可以根据界面判断机器人是否在运行-A robot s motor test program can interface to judge the robot is running
motortest
- 定时器 步进电机 脉冲+方向加减速控制 经过测试稳定性很好-Timer stepper motor pulse+ the direction of acceleration and deceleration control after testing the stability of a good
STEP-motortest
- 机器上使用的 步进电机定长控制（脉冲+方向） 经过测试已经很稳定-The machines use stepper motor fixed-length control (pulse the+ direction) has been tested and has been very stable
flash_write_read-time-again
- 测试玻璃升降器耐久试验台，这个是用ucos操作系统，freescale的EP100处理芯片开发的控制电机运动的程序-Test glass levelers durability test stand, this is to use ucos OS, freescale EP100 processing chip development program control of the motor movement
motorcontrol
- 大功率永磁同步电机控制程序，程序经过大量的调试测试，并进行台架试验。-PMSM motor control
DC-motor
- 基于MSP430F149单片机控制电机的转速正反转，控制直流电机的试验，开发板测试成功。-MSP430F149 microcontroller-based control motor speed reversing, DC motor control experiment, development board test was successful.
STM8s903_motor
- STM8S903芯片自编写程序。PID闭环调节 程序已经测试过，适合用于BLDC电机。-STM8S903 chip self-programming. PID closed-loop adjustment program has been tested, suitable for BLDC motor.
shipcontro
- 这是一个PPM信号混控程序，芯片用STC12C2052-20PIN，2.4G或27M的PPM通道一和通道二接上去后，加上电就可以混控了，可以用于双浆船或双电机加踢球电机机器人，输出为100HZ的PWM信号,整个程序经大电流测试，己完成无任何问题，如需要电原理图和PCB图，请找本人索取，QQ：12009614。-PPM CH1+CH2 contro program C51 code
main
- PWM电机驱动简单测试 电机由全速到停止，反复循环 * * 实验目的：测试 PWM 频率是否正确-PWM motor drive motor from full speed to a simple test to stop, repeated cycles* Purpose: Test the PWM frequency is correct
motor
- 基于ST系列单片机的两相步进电机关于直线加减速的代码实现，改变端口后可直接应用，经过测试运行平滑！-ST MCU two-phase stepper motor on linear acceleration and deceleration of code, change the port later on can be directly applied.
sy-motor-example
- 直流电机控制TI 2812DSP测试程序-DC motor ti 2812dsp control
xuanzhuandaolibai
- 旋转倒立摆的驱动程序，包括步进电机、编码器驱动。编码器是600线一圈，经测试可以准确测量0到180和0到-180的角度。-Rotary inverted pendulum drivers, including stepper motor, encoder drive. The encoder is around 600 lines, the test can accurately measure the angle 0 to 180 and 0 to-180.
k_funcs
- 自己编写的伺服电机驱动程序，这个是内核部分算法。电机能够正常运转，并做过详细的测试。比较实用，希望对大家有帮助。-Write their own servo motor driver, this is the kernel part of the algorithm. Motor can work normally, and has done a detailed test. More practical, we want to help.
pid
- PID算法资料及测试软件:前馈_改进PID算法在智能车控制上的应用.pdf,PID调节控制做电机速度控制(非常好).pdf,PID的智能车控制算法研究.pdf-PID algorithm information and test software: feedforward _ improved PID algorithm in the application of intelligent car control.pdf, PID regulator control to do the motor