搜索资源列表
lpc2129_pwm
- NXP的一个开发例子。利用ARM公司开发的CARM开发环境可以打开-NXP example of a development. ARM developed using the amplifier can open development environment
LPC2000_CAN_Driver_Demo
- NXP LPC2000 CAN Bus demo
LPC3250_TEST
- NXP的ARM9 LPC3250 在不跑操作系统情况下的测试程序。如果某些应用不跑linux 或者WINCE 等操作系统的情况下可以参考这些代码。我的编译环境是：Realview MDK 3.22 （keil的升级版）-NXP ARM9 (LPC3250) does not run the operating system in the case of the test procedure. If some applications do not run operating systems su
TinyM0-CAN
- NXP LPC11C14 CAN 测试源码-NXP LPC11C14 CAN test source
FS44B0X_USB
- fs44b0x_usb -- usb 测试程序 PC机部分的软件 1) LEDDEMO -- 控制 FS44B0X板上三个LED的程序 2) D12_DRIVER_FOR_WIN98 -- USB芯片WIN98的驱动程序 3) D12_DRIVER_FOR_WINXP -- USB芯片WINXP的驱动程序 FS44B0X板的USB固件程序--源代码 USB_DEMO 使用方法： 1）在SDT2.51里调入usb_demo.axf, 运行。 2）接
CAN
- NXP ARM处理器CAN总线程序（keil环境）-NXP ARM processors procedures CAN bus (keil Environment)
DCDI901-CAL-1
- nxp lpc920的数字点火器 描 述: 数字点火器,单曲线,计算 1、外接4M晶振,DIVM=1,pclk =1M,RTC:XCLK =4M 2、编程选项:WDTE使能 WDTS使能 低电压复位使能 外部晶振 内部复位-nxp lpc920 igniter described in the figures: the number of ignition, a single curve, calculation of 1, 4M external cryst
CAN
- NXP 新推出ARM7处理器芯片LPC2478的CAN总线模块的例程代码。编译环境为IAR。-Code for the CAN-BUS module of NXP s LPC2478 chip.The compile environment is IAR.
LPC2460
- NXP半导体围绕16/32位的ARM7TDMI-S CPU内核来设计LPC2420/LPC2460微控制器，该CPU内核带有实时调试接口，包含JTAG和嵌入式跟踪。LPC2420/LPC2460微控制器没有Flash。LPC2460能够执行32位ARM和16位Thumb指令。LPC2420/LPC2460支持这两种指令集意味着工程师可以针对性能或代码大小，在子程序级下选择优化他们的应用。当内核在Thumb状态下执行指令时，它可将代码规模降低超过30 ，性能的损失却很小；而在ARM 状态下执行指
LPC2378_UART
- NXP的LPC2378的四个串口的编程，同样对NXP的ARM7的其他系列基本不用修改就可使用。-NXP' s LPC2378 four serial programming, the same pairs of NXP' s ARM7 and other series of the basic no amendment can use.
BUSpec_AHB
- This the specification file used for AMBA the ARM7 Microcontroller. This is developed ARM and it can available with various manufacturer like NXP, ATMEL-This is the specification file used for AMBA the ARM7 Microcontroller. This is developed ARM and
MDK3.50--key
- MDK注册机。4.14版本也能注册机。现在所有版本的都能注册。支持STM32 NXP公司最近新出的F2XX LPC1788等系列处理器。-MDK RI. RI 4.14 version also. Now all versions can be registered. Support for new STM32 NXP recently out of F2XX LPC1788 series processors.
an10916
- lpc1700dsp库 针对NXP LPC1700系统CORTEX M3 处理器，使用MDK开发平台，包含所有功能模块，外设的驱动与实例 LPC1700_EFSL_Prj/efsl/docs/pages/CVS/ LPC1700_EFSL_Prj/efsl/docs/pages/CVS/Entries LPC1700_EFSL_Prj/efsl/docs/pages/CVS/Repository LPC1700_EFSL_Prj/efsl/docs/pages/CVS/Roo
LPC17xx_CAN_Demo
- NXP Cortex-M3 LPC17xx 系列在KEIL下的CAN模板例程-NXP Cortex-M3 LPC17xx series CAN template routines under KEIL
uart
- 恩智浦的LPC1768 的串口应用代码，可以现实单片机与PC 之间的通信-NXP LPC1768 serial port application code, can real communication between the microcontroller and the PC
CAN-BUS
- can bus 接收发送程序.NXP mcu 内嵌can controller控制器-can bus recieve and send. MCU is designed by NXP, and include can controller.
NXP-em773--sample-source-code
- NXP EM773 的芯片 驱动开发源代码工程，可以用来开发如SPI的驱动-The NXP EM773 chip-driven open source project, can be used to drive development such as SPI
NXP-LPC952
- The BLINKY program is a very simple program that blinks the LED s on connected to Port 5 of the MCB950. When you can successfully build and run this program-The BLINKY program is a very simple program that blinks the LED s on connected to Port
NXP-LPC954
- The BLINKY program is a very simple program that blinks the LED s on connected to Port 5 of the MCB950. When you can successfully build and run this program-The BLINKY program is a very simple program that blinks the LED s on connected to Port
TWR-K70F120M软硬件资料合集
- NXP(原为Freescale)的K70平台的塔式开发板TWR-K70F120M的软硬件资料合集，包含有：硬件原理图，硬件PCB图纸，BOM表等；软件源码包，BOOT升级程序源码包。 使用本资料合集，可在TWR-K70F120M开发板上进行功能验证和应用开发。(NXP (formerly Freescale) K70 platform's tower development board TWR-K70F120M's hardware and software data collection,