搜索资源列表
UCOSusb
- 在ads1.2编译成功基于lpc2214的UCOS操作系统下的usb及串口通讯系统项目文件.包括ucos内核文件.对在ucos下编写arm程序朋友大有帮助.-in ads1.2 compiler based on the success of the UCOS lpc2214 operating system under the usb and serial I communications system project documents. OUT including kernel docum
flreversi-0[1].7.tar
- Siemens 的SIMpad是一个多媒体设备，带有基于StrongARM处理器SA1110的800x600x16的分辩率。这个项目的目标是提供一个完全的带有内核和应用程序的Linux操作系统-Siemens SIMpad is a multimedia device, based on the StrongARM processor with the SA1110 800x600x16 the Resolution. The objective of the project is to pro
SDCard_BootLoader
- 基于s3c2410、2440的从SD卡引导Linux内核程序，实现FAT文件系统，读取SD卡内的Linux内核到SDRAM中，并运行。-Based on s3c2410, 2440 from the SD card boot Linux kernel procedures, implementation FAT file system, read the SD card inside the Linux kernel to SDRAM, and running.
ft5406_ts
- Source code for FocalTech ft5406 Touchscreen driver for Urbetter UTV210-based tablets (kernel 2.6.35.7).
arm_linux-2.6.21_s3c2440
- linux-2.6.21 内核 基于arm_s3c2440-linux-2.6.21 kernel-based arm_s3c2440
S3C6400
- 三星公司的基于ARM1176JZF内核的多媒体应用处理器S3C6400的开发板原理图。-Samsung ARM1176JZF kernel-based multimedia applications processor S3C6400 development board schematic.
ARMyuLinux
- 基于arm和linux开发过程及开发环境的建立，linux内核移植及程序设计-Based on the arm and the linux development process and development environment for building, linux kernel porting and Program Design
OSELAS.BSP-Phytec-phyCORE-i.MX31-Quickstart123.ra
- It is good doc to check out kernel properties of ARM 11 based boards
MZt-24_LCD
- 基于cortemM3内核的stm32 MZT-24 彩色液晶驱动程序-Based cortemM3 kernel stm32 MZT-24 Color LCD Driver
STM8_Miniki_Docs
- STM8 MiniKit 是一款基于STM8 系列八位单片机的低成本评估板。评估板上配有 基本的外部器件，从而方便用户对STM8 的内核及外设的性能进行评估。 本文档对评估板的使用作了简要说明，并附上相关原理图和PCB 图。此外对评估 板附带的5 个例程也作了简要说明。-STM8 MiniKit is a series of 8 chip STM8 based on low cost evaluation boards. Evaluation on board with The
S3C2440LinuxStepByStep_V4.5_20100605
- Linux 2.6.30.4内核在S3C2440上的详细移植过程。基于天嵌TQ2440开发板。-Linux 2.6.30.4 kernel S3C2440 details on the migration process. TQ2440 embedded development board based on days.
mma7660
- Source code for FreeScale mma7660 3-axis accelerometer driver for Urbetter UTV210-based tablets (kernel 2.6.35.7).
s3c-button
- Source code for s3c-button interface driver for Urbetter UTV210-based tablets (kernel 2.6.35.7).
donix
- 基于arm920T的类unix操作系统内核的实现 注释完整 适合作为arm课程的大作业 内核结构清晰，绝对原创-Big job kernel structure suitable as an arm courses complete arm920T unix-like operating system kernel-based implementation comments clear, absolute originality
IRcamera-controlling
- 红外变速球型摄像机控制程序，基于ARM-comtex3内核，兼容SONY、HITICHA等多款相机控制，变焦光源控制，安防行业协议解析和远程升级源代码。-IR speed dome camera control program, based on the the ARM-comtex3 kernel to compatible the SONY, HITICHA variety of camera control, change Jiao Guangyuan control, protocol
RTThread_uart1
- 基于cortex-m3内核的STM32F107，RTThread操作系统上使用uart1-Cortex-m3 kernel-based STM32F107, RTThread operating system used on uart1
RTX_Blinky
- 一个简单的RTX内核例子 实现步进电机驱动，通过四个LED模拟驱动器状态-This is a simple RTX Kernel based example which simulates the step-motor driver. Four LEDs are blinking simulating the activation of the four output driver stages:
Scheduler
- Interrupt Ticker based Scheduler for implementing a micro kernel to operate a Real Time System in an AVR microcontroller
TouchPanel
- 基于内核cortex-M3的lpc1768的4.3寸触摸屏源代码-the source code of 4.3in touchpanel based on the kernel corte-m3 of lpc1768
Linux
- Linux开发系列由浅入深地介绍了交叉编译工具的搭建、基于s3c2416 bootloader的实现过程，以目前最新版的linux4.10.10内核为基础，一步步细致地介绍了修改编译，以及最简单的hello world根文件系统到实用复杂的根文件系统的构建。从而对bootloader、linux内核、根文件系统之间的关系有一定的认识。系列文章选取了几个典型的linux设备驱动，如LED、gpio按键、u盘、sd卡、网卡、nand flash、lcd等等，介绍了linux设备驱动框架的模式。针对嵌