搜索资源列表
drivers
- 在S3C44B0上实现的键盘和LED驱动程序，其关键是使用了系统定时器来提高效率。此代码依赖于硬件的GPIO接口，但只需按照实际稍微改动即可。-S3C44B0 in achieving the keyboard and LED driver, The key is to use a timer system to improve efficiency. This code depends on the hardware GPIO interface, but only in accordance
button.rar
- 基于嵌入式linux下的button按键驱动实现代码。利用状态机实现去抖动、短按及长按键等功能。具有参考价值。,Under the button based on embedded linux key driver to achieve the code. Using the state machine to achieve to jitter, short and long key press functions. With a reference value.
key
- lpc3250编写测试成功的linux2.6.28内核下的按键驱动源码，允许动态加载和卸载。-lpc3250 successful linux2.6.28 writing test buttons under the kernel driver source code, allowing dynamic loading and unloading.
code
- ARM mini2440 包含LED，KEY中断，串口通信等测试代码-ARM mini2440 test source code
AT91USBFramework-Core1.02+MSD1.0
- This software package contains the USB framework core developped by ATMEL, as well as a Mass storage driver. The MSD driver uses the internal flash of the chip to operate as a disk-on-key. The following files are included : - core/ -&
02
- 《ARM嵌入式Linux设备驱动实例开发》，第二章代码，按键驱动开发-" ARM embedded Linux device driver development examples" chapter code, key-driven development
04
- 《ARM嵌入式Linux设备驱动实例开发》，第四章代码，按键驱动开发-" ARM embedded Linux device driver development example," Chapter IV code, key-driven development
05
- 《ARM嵌入式Linux设备驱动实例开发》，第五章代码，按键驱动开发-" ARM embedded Linux device driver development example," Chapter V code, key-driven development
mygui-demo.tar
- 基于minigui2.0.4进程版，使用键盘控制启动另一个应用程序。原创。-code for minigui-2.0.4, use key-board to run another app.
mini2440_buttons
- 嵌入式LINUX按键测试程序及其相应的测试代码-Embedded LINUX key test procedures and their corresponding test code
Key
- 基于SEP4020下的key测试代码。c语言。-SEP4020-based test code under the key. c language.
TX2440_button
- 天祥2440开发板的按键驱动源代码。代码有注释。-Intertek' s key 2440 development board driver source code. Code has comments.
KEY_ZIG7290
- s3c2440控制ZLG7290芯片的按键的裸机驱动程序-s3c2440CPU and ZLG7290 chip pressed key s bare driver code
btn_drv
- 查询方式实现简单按键驱动程序 根据本人《Linux简单字符设备驱动编写方法》一文的步骤，用查询方式简单实现Mini2440开发板的按键驱动程序。 代码共分二个文件，驱动程序<btn_drv.c>和测试程序<btn_test.c>。-Simple ways to search for key drivers According to my "Linux character device driver writing simple method"
KEY-LED
- C写的，stm32按键扫描，源代码，要求配置好函数库，试验可以使用，-Written in C, stm32 button scanning, source code required to configure the library, the test can use, thank you
Key
- sep4020，基于ARM内核的国产微处理器，sample测试代码。键盘功能测试代码。-sep4020, made microprocessors based on ARM core sample test code. The keyboard function test code.
TQ2440
- 基于天嵌TQ2440开发版的裸机代码源码包括点亮LED让LED闪烁还有按键程序（利用断或查询的方式），串口的源代码，可直接烧进开发板运行-The day embedded TQ2440 Developer Edition bare metal code source-based lit LED LED flashes also key program (off or query), the serial port of the source code, can be directly burne
KeyboardTest
- Linux 上的鍵盤測試程式，幫助開始學習嵌入式 Linux 的人可以快速有一個輸入裝置-Linux Keyboard Testing Code, will return key code(raw data).
graduation-design(code-on-the-last)
- 实现单片机脉搏测量的关键代码，许多做毕设的都在渴求的代码段。- Achieve the key code of the pulse measurement , many person who make the graduation design may need it.
key
- 该源代码是实现的是基于linux的关于按键的驱动程序，该驱动程序是基于字符设备实现的-The source code is to achieve is based on the linux button on the driver, the driver is based on the character device implementation