搜索资源列表
up-can
- ARM9 S3C2410嵌入式系统设计与实例开发实验－6CAN总线通信实验-ARM9 S3C2410 Embedded System Design with examples of experimentation - 6CAN bus communication experiments
uart
- linux 串口通信驱动源码,该代码能够接PC机键盘-linux-source-driven serial communication, the code can access PC keyboard
CAN
- 在samsung2410处理器上can实现通信的源码
PICcommunicatewithcan
- 基于PIC单片机的嵌入式CAN智能节点及其与PC的通信。-PIC MCU-based embedded CAN intelligent node and its communication with the PC.
uart_test
- arm2440下，linux2.6内核串口通信应用程序，各参数在源码内可灵活修改-arm2440 under, linux2.6 core serial communication applications, the parameters in the modified source code can be flexible
TestFunk
- can control 与 can bus Gateway 通信-can control and communication can bus Gateway
LinuxCAN_S3C2410
- 基于ARMS3C2410的在Linux下通过CAN控制器进行通信-Linux-based in ARMS3C2410 through CAN communication controller
com.c.tar
- 串口通信测试程序--可以用于嵌入式linux下串口通信，也可以用于x86下-Serial Communication Test Program- an embedded linux can be used under the serial communication, can also be used under x86
embedded_linux_system_development_for_ARM_code
- 《ARM嵌入式Linux系统开发》随书光盘中的实例源码,包括:第17章 嵌入式Linux的多任务编程,第18章 多任务间通信和同步,第19章 Linux设备驱动,第20章 嵌入式Linux的网络编程.第21章 MiniGUI图形界面设计,第22章 CAN总线驱动设计,第23章 SD卡驱动设计中设计的全部代码-" ARM Embedded Linux System Development," CD-ROM with the book' s examples of sourc
Embedded_Remote_Control_System_Based_on_GPRS
- 本课题基于ARM嵌入式硬件平台，以嵌入式Linux为操作系统，设计并实现了一个远程控制系统。该系统主要包括远程控制终端系统、控制服务器系统和受控终端系统三大模块，实现了GSM短消息收发、GPRS数据传输、视频图像采集、蓝牙无线通信、直流电机变速控制和远程终端人机交互等功能。该系统可广泛应用于智能家居、工矿采集和机械生产等远程控制方面。-The remote control system designed and implemented in the paper is based on ARM e
LoadImageWithSocket
- 在上次的加载图片程序上新增了socket功能，可以在切换图片的同时与运行于PC端的MenuServer建立TCP通信，将当前图片的路径信息发送至server端。-Procedures in the last loading pictures added socket feature, you can switch the pictures in the same time and run on the PC side of the MenuServer establish TCP communi
Ecan_Linux_V02.02.01.tar
- Linux系统下的底层Can通信应用程序 提供了完整的接口通讯功能-This program is used to communicate for CanBus,in Linux system.
yi-tiao
- 一个单片机ADC0808或者0809的AD转换C语言程序，可以和PC机通信-A single-chip microcomputer ADC0808 or the AD transform 0809 C programming language can and PC communications
RS485
- 这是适用与s3c2410处理器的485通信的裸奔代码，在项目中可以直接copy。如果是采用其它处理器即修改寄存器即可。-This is applicable to s3c2410 processor 485 with the streaking code in the project can copy. If you are using other processor registers that can be modified.
daima
- 实现开发板上与串口进行通信，可以在串口上一次性接收比较大的数据量-To achieve the development board to communicate with the serial port, one serial port can be relatively large amount of data received
source
- 包含LPC2119开发板的全部实验的所要用的程序，比如基本的CAN通信试验，AD实验等等，经验证，没有错误 -The program contains all the experimental use LPC2119 development board, such as basic CAN communication test, AD experiments, etc., proven, no errors
CAN
- 之前做的CAN总线通信的模块，基于STM32开发，使用RVMDK3.80A编译通过-Before doing the CAN bus communication module, based STM32 development, use RVMDK3.80A compile.
Can_Rec
- 程序能够完全运用在天嵌TQ2440核心板上面，主要利用SPI驱动来控制CAN芯片MCP2515实现can通信。-Program can be fully used in the days of embedded TQ2440 core board above the main driver to control the use of SPI chip MCP2515 CAN communication can achieve.
hsz-2416-can
- qt中实现的can2.0通信历程，支持标准帧，远程帧，支持ID过滤器-can2.0 example for qt embedded arm linux
Linux_Can
- linux can 通信程序，基于em335x主板-linux can communication program, based em335x Board