搜索资源列表
MusicFountain
- 这是基于STM32F103写的室内音乐喷泉的源代码（已包含发送接受程序），通过麦克风采集音频信号，STM32处理，并把控制信号通过24L01发送给另一个STM32，控制7个电机的运转-This is based the STM32F103 write the indoor musical fountain source code (included sending and receiving process), collected by the microphone audio signal,
SerialCode
- 通过串口调试助手向STM32发送命令，STM32再把接受到的命令通过24L01发送出去，已包含发送接受程序，测试通过-Serial debugging assistant to send commands to the STM32, STM32 then receive commands sent by 24L01 has included sending and receiving process by testing
nrf24l01
- 24L01无线模块芯片的驱动程序，STM32控制发送接收-24L01 wireless chip driver module, STM32 control the transmission and reception
stm32-nrf2401-EXIT_usart
- 24l01接收端通过irq的下降沿触发stm32外部中断，在中断处理函数中实现无线接收，提高了代码效率。-24l01 receiving end through irq stm32 falling edge of external interrupt, the interrupt handler wireless receiver, improved code efficiency.
24l01
- stm32下 24l01 2.4G无线串口程序，已经调试完成确认可用-stm32 next 24l01 2.4G wireless serial procedures have been completed commissioning confirm availability
STM32PNRF24L01
- 利用STM32调试的24L01无线收发模块，发送和接收端均有程序。-Use STM32 debug 24L01 wireless transceiver modules, both sending and receiving end program.
STM32-wuxian6jieshou
- 基于STM32实现无线24L01多向通信，可以一通道发送6通道接收-24L01 multi-directional communications channel can transmit a six-channel wireless receiver based STM32
NRF-24L01-STM32
- 基于KEIL4.7开发软件的在STM32F103ZET6单片机上实现两块单片机之间的通信的源代码，功能为甲给乙发送多组字符（如：01），在乙方收到之后会LED显示，同时收发双方都在LCD屏幕上显示发送的字符串-Simultaneously send and receive sides, will be displayed after the LED Party received: KEIL4.7 based microcontroller software development to achi
STM32-24L01
- STM32芯片驱动24L01模块实现无线通信-STM32 chip driver using wireless communication module 24L01
stm32_wireless_24L01_2012-03-18
- stm32 下通过24L01进行无线传输的代码。-24L01 source code by stm32
24l01
- NRF24L01基于stm32发送与接收，中断判断发送与接收状态，无丢码。-NRF24L01 based stm32 send and receive, send and receive status interrupt judgment, no missing codes.
STM32
- STM32的基本驱动代码，包含24l01无线，ADC，5110液晶驱动等，是电子设计的利器-STM32 basic driver code, including 24l01 wireless, ADC, 5110 LCD drivers, etc., is the electronic design tool
STM32-24L01
- 24L01模块使用程序 经典例子STM32的-24L01 demo
NRF24l01
- STM32的 可自由切换收发模式的24L01的完整程序，已经测试通过，无死机现象-STM32 can be free to switch the transceiver mode 24L01 complete program, it has been tested, no crash phenomenon
stm32f103zet6
- 改程序是基于stm32的无线传输方案，实现了24l01真正的中断接收-Reform program is based on wireless transmission scheme stm32 achieve a real interrupt reception 24l01
ALIENTEK MINISTM32 实验24 24L01无线通信实验
- ALIENTEK MINISTM32 实验24 24L01无线通信实验(ALIENTEK MINISTM32 experiment 24 24L01 wireless communication experiment)
24l01_test
- 基于STM32的24l01的设计开发，遥控距离100m，用于四轴飞行器的遥控。(The design and development of 24L01 based on STM32, remote control distance 100m, used for remote control of four axis aircraft.)
24L01无线遥控 PWM控制步进电机 电位器 串口显示
- 单片机STM32 2.4g无线传输 PWM(singlechip STM32 2.4g for pwm c-c++>;)
24L01无线通信
- 采用stm32f103rct6作为主控，两个NRF23L01传感器作为2.4G通信模块进行两个控制板的通信，距离可达30多米。(Stm32f103rct6 is used as the main control, and the two NRF23L01 sensors are used as the 2.4G communication module to communicate with the two control boards, and the distance is more tha
02141522完整
- 程序包含了stm32驱动mpu6050、指南针5883、GPS和无线模块24l01，想要那个自行筛选(The program contains the STM32 driver mpu6050, the compass 5883, the GPS, and the wireless module 24L01, and want that self screening.)