搜索资源列表
uC_OS II的多任务操作系统全部原代码
- uC_OS II的多任务操作系统全部原代码 .zip - ZIP 档案文件, 解包大小为 7,641,795 字节-Full source code of uC/OS II RTOS in ZIP format
支持256个任务的UCOS2.51
- 修改后的ucos2.51可以支持256个任务，在vc下测试过。-revise the ucos2.51 can support 256 missions, under the vc tested.
UCOS2在stm32下的移植，多任务
- UCOS2在stm32下的移植，驱动多个任务，MDK平台已测试
Stm32_ucos 在STM32上编写多任务实时操作系统
- 在STM32上编写多任务实时操作系统，同时运行6个任务，通过发送和接收信号量机制，解决哲学家就餐问题，通过板上按键代表哲学家的就餐请求，板上LED灯表示就餐成功或者未果，同时在晶体数码管上显示就餐申请时间。-STM32 to write multi-task in real-time operating system, run six tasks by sending and receiving semaphore mechanism to solve the dining philosophe
UCOS.rar
- 这是一个UC/OS-II的多任务实例，这是应用在80C51上的一个例子。,This is a UC/OS-II mission of many examples, which are used in an example of 80C51 on.
uCOS-II
- 各个实例显示嵌入式实时操作系统μC/OS-Ⅱ内核的任务管理和调度、系统时钟和节拍服务、时间管理、中断、任务的通信和同步、内存的简单管理原理，适合初学者入门-All examples of embedded real-time operating system μC/OS- Ⅱ core task management and scheduling, the system clock and the tempo of service, time management, interruption,
TaskSchedule
- 本程序是关于ucos上的任务调度的一个程序，非常实用，有详细的注释。-This procedure is on the mission uCOS about scheduling a program, very useful, there is a detailed explanatory notes.
ucoszlg7290
- ucos在ARM芯片LPC2210上的移植代码，包括三个任务：中断方式读ZLG7290的按键；基于I2C接口的温度传感器；一个TFT液晶芯片的驱动显示，调试通过。-ucos in ARM transplantation on the LPC2210 chip code, consists of three tasks: reading ZLG7290 interruption of the keys I2C interface on the temperature sensor a TFT
ucos51transplant
- ucos在51上的移植，绝对可用。并且包含proeus仿真，内带大约5个任务。-ucos transplant on the 51, absolutely free. And includes proeus simulation, with about 5 missions within.
DSP_UCOS_run_in_flash_nonBIOS
- 实现uCOS在DSP TMS32F28335的移植和多任务的切换，包含液晶显示，数码管驱动显示，Ad采样等(UCOS in DSP TMS32F28335 transplantation and multitasking switching, including liquid crystal display, digital tube drive display, Ad sampling and so on)
1-uCOS-II+LED（单任务）
- 在stm32上一直的uCOS-II+LED（单任务），可以直接编译的(The uCOS-II+LED (single task) that has been on STM32 can be compiled directly)
2-uCOS-II+LED（多任务）
- 在STM32上一直的uCOS-II+LED（多任务），可以直接编译(The uCOS-II+LED (multitasking) on STM32 can be compiled directly)
【1】宝马LPC1768_ ucos ii_任务创建与删除
- 宝马LPC1768_ ucos ii_任务创建与删除(BMW LPC1768_ ucos ii_ task creation and deletion)
ucos 任务创建删除挂起恢复
- 基于stm32的ucos程序，实现了简单的任务创建&挂起和恢复(STM32 based UCOS program to achieve a simple task creation - hang up and restore)
ucos 任务调度
- 硬件平台是STM32 实现了ucos 的任务调度 ，任务有初始化，就绪，挂起，删除状态(The hardware platform is STM32, which implements the task scheduling of UCOS, the tasks have initialization, ready, suspend, delete state)
ucos 信号量和邮箱
- ucos 任务间的通讯，实现了信号量和邮箱的通讯(UCOS communication between tasks, the realization of semaphore and mailbox communication)
STM32F7ucosiii任务创建
- 在stm32f7处理器上进行任务的基于ucosiii系统的创建于删除，通过显示屏和串口来查看任务状态(A ucosiii based system for tasks on a stm32f7 processor is created to delete and display task status through the display and serial ports)
STM32F7ucosiii-任务挂起与恢复
- 将ucos-iii系统运行与stm32f7单片机上实现任务的挂起与恢复(Ucos-iii system operation and stm32f7 MCU to achieve the task of hanging up and recovery)
UCOSII-任务调度
- stm407 uCOS 移植，本工程实现uCOS任务调度，可直接在stm407上运行(It's a uCOS souce planted on STM407 MCU)
UCOSIII使用信号量进行任务同步
- 通过ucoslll实时操作系统采用信号进行多任务同步(Multitask synchronization using signals)