搜索资源列表
LPC2148UCOS
- 是一个有6个task的ucos演示程序，控制led闪烁。
IIC1
- iic总线控制led,我就这是根据linux下面的驱动自己改的，在ucos下运行
LED
- lpc2131上移植ucos,控制led的闪烁。
osled2
- 完成在S3C2410处理器上移植μC/OS-II内核，然后实现以下多任务： a) 控制实验箱核心板上4盏LED灯轮流亮灭； b) 将LED1连接到ARM9-2410EP增强型实验箱扩展口的DA OUT端口，通过实验箱上的键盘（比如“↑”、“↓”键）控制LED1亮暗变化，同时在超级终端显示该控制值； c) 将LED2连接到扩展口的I/O输出口，通过超级终端按键控制LED2亮灭，即按一下PC的超级终端某个键（比如回车键）LED2灭，再按LED2亮，反复循环。
LED条屏控制例程
- 本程序是用LM3S800+UCOSII2.52开发的条屏控制器，具有很好的参考价值，里面包含有HT1381、AT45B016的驱动。
uCOS-II
- 已植入uCOS-II系统的DK-LM3S9B96程序（LED控制）-UCOS-II system has been implanted in the DK-LM3S9B96 program (LED control)
keycontroloutput_ucos
- 操作系统ucos下LPC2200的key1控制4个led循环闪烁-UCOS LPC2200 operating under control of key1 cycle 4 led blinking
S3C44B0X_keyboard
- 实现了S3C44B0X 下对LED键盘的控制操作，中断机制和查询机制并用。-S3C44B0X achieved under the control of the keyboard LED operation, interrupt mechanisms, and query mechanisms and use.
SPI
- 基于ucos的LPC21xx的spi控制led实验源代码-Based on uCOS LPC21xx of the spi control led experiment source code
ucos-led
- 在UC/OS上运用C实现一个按键控制八个流水灯-In the UC/OS on the use of C 8 to achieve a key water control lights
a1
- 用ucos2编写程序代码并移植到arm7控制led灯循环点亮-ucos2 transplanted to arm7 control led lights
shiyan
- 该文件是基于周立功的EAZYARM开发板，uCOS II操作系统。实现数据采集、数据存储、I2C总线控制、LED时钟显示、键盘输入、网络通信等多任务。-The document is based on weekly contribution in EAZYARM development board, uCOS II operating system. Data acquisition, data storage, I2C bus control, LED clock display, keybo
led_os_sem_fiq
- AT91SAM7X256-EK平台，MDK开发环境，使用快速中断和信号量来控制LED-AT91SAM7X256-EK platform, MDK development environment, using fast interrupts and semaphores to control the LED
led_os_sem
- 将UCOS移植到AT91SAM7X256上，开发环境为MDK,使用信号量控制LED的闪烁，-Will be transplanted to AT91SAM7X256 UCOS, the development environment for the MDK, use the volume control signal LED' s flashing
LED
- 利用arm1138控制led闪烁模板-Arm1138 control led flash ·······
STM3-LED-ucos
- 基于uCOS-II的控制LED灯的闪烁；基于奋斗版STM32开发板-Based on uCOS-II,it can controling the flash of LED.
Led
- ucos LED灯控制代码，按键控制灯，这个对于ucos初学者还是很有用的-the ucos LED light control code keys to control the lights, this is useful for the ucos beginners or
LED-flow
- 利用LPC2124的GPIO控制8个发光二级管，构成一个简单的流水灯系统。-Use LPC2124 GPIO control eight light-emitting diode, constitutes a simple light water system.
uCOS-II-C51-LED
- UCOS下LED控制，是初学UCOS最好的例子-UCOS LED control is the best example of the beginner UCOS
UCOS2-control-LED
- 本程序实现的功能是在STM32平台上使用UCOS系统控制LED的亮灭。-This program implements the function is to use UCOS system control LED light off the STM32 platform.