搜索资源列表
uCOS-II--149
- 参考网上的提供的代码,我把uCosII移植到MSP430f149上,分三个任务,分别是485通讯,键盘扫描,LED显示,可供参考!-online reference provided by the code, and I uCosII MSP430f149 transplant, in three tasks, namely, 485, keyboard scan, LED display, for example!
Glcd
- 是门禁LED显示程序，其中有许多函数接口程序非常实用，一个不错的程序-is seldom LED display program, many of which function interface procedures are very practical, a good procedure
LJD-44B0XDVK_uCOS276
- 基于44B0的uCOS程序，包括Led显示等周期闪烁，按键输入，定时中断，打印log，初学者可用此入门-44B0 for uCOS procedures, including Led blinking cycle display, keypad input, timer interrupt, Print log, the portal available to beginners
scr
- ARM7在uC/OS-II下的测试代码 含: define.s main.c Display.c LED.c os_dbg.c Uart.c includes.h ML674000.h os_cfg.h
Exp1-Led
- 44B0 的LED显示程序不带UCOS操作系统-44B0 LED display program operating system without UCOS
Stm32_ucos 在STM32上编写多任务实时操作系统
- 在STM32上编写多任务实时操作系统，同时运行6个任务，通过发送和接收信号量机制，解决哲学家就餐问题，通过板上按键代表哲学家的就餐请求，板上LED灯表示就餐成功或者未果，同时在晶体数码管上显示就餐申请时间。-STM32 to write multi-task in real-time operating system, run six tasks by sending and receiving semaphore mechanism to solve the dining philosophe
uCOS
- UCOS工程,采用keil开发工具开发,程序中基于stm32v100处理器. 在uC/OS-II中建立3个任务Taskled、Tasktep、Taskadc和三个中断。 Taskled初始化时，LED 依次点亮，当按下 Key 键时产生中断。 中断服务子程序内容：灯全部熄灭，2 秒钟后发光二极管全部点亮，再过 1 秒钟后中断返回。 Tasktep用来实时检测温度传感器u4的温度。STM32通过IIC接口获取温度传感器的温度。 Task
S3C44B0X_led
- 实现嵌入式平台S3C44B0X，嵌入式操作系统UCOS下对LED的显示功能。-Embedded platform S3C44B0X, embedded operating system under uCOS LED display function.
uCOS_C51_LED
- uc-os在单片机上的移植，keilc中运行通过，LED显示-uc-os transplantation in the single-chip, keilc run through, LED display
LPC2131CLOCKDesign
- 利用LPC2131实时时钟实现电子钟，并利用6位七段数码管显示-Using LPC2131 to achieve real-time clock electronic clock, and the use of six seven-segment LED display
uCos2_1029B
- 基于S3C2440的开发，移植有UCOS，带液晶显示3.5寸液晶，实时时钟和ADC采样，led显示等。-Based on the development of S3C2440 UCOS, belt, transplanted with 3.5 inch LCD LCD display, real-time clock and ADC sampling, the led display.
ucosCeshi
- 基于ucos系统的压力测试系统（有键盘，led显示，报警等功能）-Ucos system pressure test on the system (with the keyboard, led display, alarm and other functions)
projectCLOCK
- 基于uC-OSII的交通灯和时钟，用七段数码管显示相关指示信息-UC-OSII based traffic lights and the clock, seven-segment LED display with relevant instructions
qiangdaqi
- 这个程序是4路抢答器的程序，这个程序实现的功能是：当主持人按下抢答键后，参赛选手才可以进行抢答。抢答时能发出声响，并通过七段数码管显示是哪位选手抢答的。这个程序在PIC单片机上测试过，效果良好-This program is 4-way Responder program, this program is to achieve the function: When the host pressed to answer in key, players can only answer in. Res
uCos2-6410-player(20140221)
- 在ok6410开发板移植了uc/osII操作系统，并用PWM定时器实现了蜂鸣器播放乐谱及led显示的功能，所有代码均已调试成功。-In ok6410 development board transplant uc/osII operating system, and with the PWM timer function to achieve the buzzer to play the score and led display, all of the code have been succe
5x7Dot-Matrix-Display
- 5x7 led dotmatrix display
STM32C8T6-PIANO-ucos
- UCOSII工程的MIDI解析 解析MIDI内容，根据MIDI文件内的节拍和音符进行钢琴教学的指示 发送到DM132进行LED显示，显示MIDI的键位和力度 内含对应到钢琴键位的原理图，和所用DM132的规格书-MIDI analysis of UCOSII project MIDI content analysis, according to the rhythm and notes in the MIDI file to carry out the instruction o
uCOSII_v2.91
- 代码是在STM32上移植的ucosII，ucos版本号为2.91。移植后有简单LED显示，可作为ucos研究的模板使用。-Code is on the STM32 transplant ucos II, ucos version number is 2.91. After transplantation simple LED display can be used as a template to use ucos research.
SteppingMotor_PWM_Adc_DMA(S加速_开漏输出)
- 具有按键、LED显示、ADC等功能，采用PWM控制步进电机(With buttons, LED display, ADC and other functions, the use of PWM stepper motor contro)
LED
- 花式流水灯的显示，可通过修改完成不同的灯型(The display of fancy water lamp can be finished by modifying different lamp types)