搜索资源列表
ucos 自己移植的在stm32上的ucos
- 自己移植的在stm32上的ucos，包括了一个串口的驱动和实例，初始汇编也改过了，可以正常使用，因为版权的关系，具体应用就不传了，希望对大家有所帮助。-Their transplantation on the stm32 ucos, includes a serial port driver and examples, the initial compilation also turn over, you can normally use, because the relationship be
ucosii-13K.rar
- stm32 ucos 精简移殖版本 不需作任何修改直接便可运行。包含串口 定时器 ,transplant stm32 ucos streamlined version without any changes can be run directly. Contains the serial port timer
UCOS_GPS.rar
- 我的stm32上GPS程序，串口部分是非库函数，有需要的可以参考下，个人觉得不错,I stm32 on the GPS program, serial part of the non-library functions, there is a need that can refer to the following individuals feel good
stm32-timerPPS2PUSART
- 在STM32F103上实现双定时器1S定时，利用RS232串口发送数据，利用中断检测PS2键盘和PC机交换信息并在串口助手上显示-In the STM32F103 dual timer 1 S timing, using RS232 serial send data, using interrupt the PS2 and PC keyboard detection to exchange information and serial port on display in assistant
STM32-serial-DEMO
- STM32 2个串口进行交互，串口1（2）发送的数据在串口2（1）接收并显示。-Interact of STM32 2 serial ports, serial ports (2) send data on the serial port 2 (1) to receive and display.
IAR
- 基于uc/os的STM32F107的开发 CAN总线、串口发指令，电机速度闭环程序-Based uc/os for the development of STM32F107 CAN bus, serial port send command, motor speed closed-loop process
1.2
- 可以实现PS2键盘 定时中断 UART串口通信-PS2 keyboard can be achieved timer interrupt UART serial communication
ucOS
- 一个基于uc/OS -II环境下的串口驱动，-Based uc/OS-II environment, the serial driver,
ucOS_USART
- 基于嵌入式微处理器STM32上uc/os_ii串口程序-Based on embedded microcontroller processor on STM32 uc/OS ii serial program
MBSlave
- 基于stm32 的uc/os移植串行通信协议-Serial communication protocol based stm32 uc/os transplant
Serial-loop-transceiver-20130915
- stm32串口循环收发 并采用中断方式 大大提高串口效率-stm32 usart Serial loop transceiver
STM32-led-blinjk-for-ucos
- STM32 开发板基于 uCosII 2.86 的 LED灯闪烁实验 开发板上电后，LED1-3 会按照默认的 500ms 间隔，明暗闪烁，此时可以通过 串口助手 SSCOM3.2 发出指令，设置 LED1,LED2,LED3 的闪烁间隔时间。间隔范围是 1-65535ms。可以设置任意一个 LED 得闪烁间隔时间， 通过这个实验，可以学习 ucosII 的 任务建立，及任务调度， 事件同步等内容。-STM32 development board based uCosII
USART_Driver
- 基于UCOS内核的，STM32串口驱动程序，接收与发送使用中断方式，并提供print_infor含数，可作为log的输出-UCOS kernel based STM32 serial driver
vp087
- Achieve serial data acquisition, Course designed to prepare the matlab program code, Dimensional phononic crystals FDTD method calculation examples band gap.
nqcdp
- Very convenient to use, Achieve serial data acquisition, In matlab R2009b debugging through.
pyaxk
- Multi-target tracking particle filter, Achieve serial data acquisition, Can dynamically adjust the parameters of the operating environment.
iiyrk
- Stepwise linear regression, This is the second energy entropy matlab code, Use serial programming examples matlab GUI implementation.
APP
- 吧can通信包转换成串口 里面包含can口的设置 500kb/s 串口波特率是19200(Bar can be converted into a serial communication package)
STM32F407_uCOS-III lwip(20160827)
- 主要实现功能： 1 tcp server并发（主要涉及文件app_lwip.c、app_tcp_server.c） 2 网线热插拔（主要涉及文件app_lwip.c、app_tcp_server.c） 3 不重启修改ip地址（主要涉及文件app_lwip.c、app_tcp_server.c、app_key.c（按键修改ip地址）） 4 将lwip的数据接收从中断方式改成单独的接收任务方式（主要涉及文件app_lwip.c） 5 usb串口信息打印（115200波特率） 6 注意：使
气象站数据采集
- 采集气象数据通过串口输出送到到WIFI网络中(Collecting meteorological data is sent to WIFI network through serial port output.)