搜索资源列表
STM32C串口shell
- 一个基于STM32F103的串口shell程序，运行于ucos上，IAR代码，直接用IAR6.10打开编译下载即可运行。
STM32UCOSGUI.STM32F103 ucos+gui 加触摸屏
- STM32F103 ucos+gui 加触摸屏，不过屏是320*240的16屏跑起来就有点慢了。,STM32F103 ucos+ gui plus touch screen, but the screen is 320* 240 screen 16 bit running on slow.
STM32F103-UCOS.rar
- 针对STM32F103的UCOS移植，支持RealView MAK及IAR开发环境,UCOS for the STM32F103 transplantation, support for RealView MAK and IAR development environment
UCOS_STM32
- STM32F103的UCOS2版本,包含BSP开发包.-UCOS2 FOR STM32F103
ucos-iii-to-stm32
- keil工程下uCOS-III在stm32f103上的移植的源代码，该程序可以再103 和107 芯片上运行成功运行-uCOS-III on stm32f103, keil project transplant source code, the program can be run on the 103 and 107 chips run successfully
STM32F103ucOS-II
- STM32F103的ucOS-II 移植好的工程。项目可以直接编译、调试，没有错误和警告，注释详尽。ST的Cortex-M3内核，在UCOS-II中建立两个任务，分别以1s和2s点亮熄灭两个LED。-The ucOS-II transplantation STM32F103 good works. Project can compile, debug, no errors and warnings, detailed notes. ST' s Cortex-M3 core, in UCOS-II
uCOS_DEMO_for_i9320_stm32
- 使用STM32F103、ILI9320移植的ucGUI3.90+ucOS2.86嵌入式图形界面操作系统，使用Keil MDK3.50 + J-Link调试。-The use of STM32F103, ILI9320 transplant ucGUI3.90+ ucOS2.86 embedded graphical interface operating system, use the Keil MDK3.50+ J-Link debugging.
uCOS-II_V286
- uCOS-II v2.86 在 STM32F103 上的移植-uCOS-II v2.86 in STM32F103 Porting
UCOSCII
- 1、UCOS-II在STM32中的移植 2、ucos-ii中文书(邵贝贝) .rar 3、STM32F103在UCOSCII上的应用-1, UCOS-II in the transplant STM32 2, ucos-ii Chinese books (Shao Beibei). Rar 3, STM32F103 the application in the UCOSCII
STM32F103_ucos2.83
- uCOS-II在STM32F103上的移植-uCOS-II in the transplant STM32F103
stm32PuCOSPuCGUI(FSMC)
- uCOS-II在stm32F103上的移植-uCOS-II in stm32F103 Porting
STM32-ucos-II
- STM32f103 uCOS移植代码，不带屏-STM32f103 uCOS transplant code, without the screen
stm32f103
- STM32F103VET6+uCOS-II+ucgui+多功能MP3+Text等多功能界面。-And multifunction MP3+Text STM32F103VET6+uCOS-II+ucgui+ multifunction interface.
ucos---GPIO-stm32f103
- 基于STM32f103vct的ucos操作系统下的GPIO程序-Based on ucos operating system under STM32f103vct GPIO
uCOS-III-model
- 将UCOS-III移植到STM32平台，编译环境为KEIL。里面包含完整工程，可以在STM32F103开发板上运行。-UCOS-III will be ported to the STM32 platform, the compiler environment KEIL，Which contains the complete engineering, can run on the STM32F103 development board.
STM32F103
- 在STM32F103移植UCOS，通过LWS-UM-BTM430蓝牙模块发送两路UART数据-In the transplantation of STM32F103 UCOS, through the LWS-UM-BTM430 Bluetooth module to send two UART data
uCOS-II
- STM32F103系列UCOS 2.86源码-STM32F103 series UCOS 2.86 Source
Micrium---stm32f103
- Micrium 公司的最新ucos源码,UCOSII的源代码-Micrium s newest ucos source
工程模板 - UCOS III
- stm32f103系列ucosiii模板(STM32F103 series ucosiii templates)
高级例程-基于MINI 板的UCOS 创建2个任务
- STM32F103跑了一个UCOS代码，供需要移植系统的同学(STM32F103c8t6,ucos,two task)